Although it is not entirely sure yet, we are fairly certain that libArachne release will have
a setting version of 18, so it is changed by this commit. With this change, the VersionUpgrader
will be properly triggered.
Contributes to CURA-7683 and CURA-7656
We have a change now that requires a version upgrade. This triggers all profiles to update for the user, and we must update accordingly in the built-in profiles.
Contributes to issue CURA-7118.
Given that:
* stair stepping is intended to be used to reduce the adhesion between support and the model, where the support rests on the model, and to reduce scarring, and
* PVA doesn't suffer from scarring or adhesion issues due to its water-solubility, and
* our current stair stepping algorithm has some bugs, causing support to disappear sometimes
we've decided to set stair stepping to 0 for all PVA profiles for UM3, UMS5 and UMS3.
Contributes to issue CURA-7311.
Also convert the values for prime_tower_min_volume to make it behave similar to what the minimum volume used to be. This feature fixed a bug with the computation from volume to thickness. Now it's correct but we have to correct the old values to be still the same (approximately) as what used to be the end result.
Contributes to issue CURA-5457.
- Remove "author" from "metadata" section
- Add "hardware_type" for variants that don't have it
- Reformat "metadata" section to have the following order:
- setting_version
- type
- hardware_type
CURA-4451
- Add upgrade script for 3.0. to 3.1
- Upgrade old stack files so they will use "empty_quality" as the
"Not Supported" quality profile.
- Increase SettingVersion to 4
CURA-4145
When features with limit to extruder set to "not overriden" and its
value is retrieved with "extruderValue()", because the extruder number
is "-1", extruderValue() falls back to the global stack. As a result,
values can be incorrect. This workaround using the variants temporarily
solves the problem for outer and inner wall line widths.
CURA-3872
We add a new setting "machine_nozzle_type" to give the engine
information about the nozzle type, such as "AA" and "BB". This is
applicable to UM3 and UM3XL.
The UM3 definition sets the setting to 3mm. Nothing else sets it to another value except FDM Printer. I left the UM3 setting in and removed all travel_avoid_distance settings in the UM3 profiles.
They share the same profiles. They should also have the same settings in the variants, but this is not automatically shared for some reason.
Contributes to issue CURA-3650.
These are now upgraded to version 3, meaning that they will have to increase their version numbers and remove any start_layers_at_same_position settings they define. None of these profiles define any start_layers_at_same_position so it's just the version number then.
Contributes to issue CURA-3479.
