p.kuiper
a88cb2bb48
I accidently deleted the files while testing the profile changes and committed without them. Restored the files.
...
Relates to PP-126
2022-03-14 11:22:30 +01:00
p.kuiper
6f36998feb
Moved the horizontal layer expansion correction (corrects for the bulging of the extruded beads) from the engineering intent profiles to the default profiles for all ultimaker machines (ultimaker.def.json). This will improve the dimensional accuracy of the default, visual and draft intents.
...
Relates to PP-126
2022-03-14 10:53:03 +01:00
geeetech3d
843f00f6ff
add Mizar_S Profile
2022-03-12 09:46:29 +08:00
Mehmet Sutaş
43cc971835
Update rigid3d_base.def.json
2022-03-10 20:07:22 +03:00
Mehmet Sutaş
1e55652bd6
Update rigid3d_base.def.json
2022-03-10 18:39:08 +03:00
Mehmet Sutaş
b4157b24c9
Zero3 Definitions
2022-03-10 18:10:45 +03:00
Rijk van Manen
a9264cd41c
set maximum value in stead of maximum value warning PP-129
...
Co-authored-by: Jaime van Kessel <nallath@gmail.com>
2022-03-10 15:59:23 +01:00
Rijk van Manen
e2ea2ee3f5
increase filter distance
...
Adding and splitting of lines results in print artefacts and additional travel moves. Avoiding these by sacrificing some additional line width change is better. The linewidth can never very more then 75% - 150%, so this long filter distance cannot cause huge line width changes. PP-129
2022-03-10 14:46:54 +01:00
Rijk van Manen
826b697329
reduce top bottom flow
...
The top bottom is a 100% density part of the print. For these parts it is super important to not over extrude. At the same time we dont want an underextruded top layer, since that is looking ugly. That is why we enable a roofing layer and reduce the flow for the rest of the top/bottom. PP-93
2022-03-10 14:27:42 +01:00
Rijk van Manen
2e25b84184
reduce flow for high infill density
...
This was already merged into CURA4.13 but apparently lost in master. PP-86
2022-03-10 14:25:42 +01:00
Tim Kuipers
30d5814f37
make defaults comply with parent default values
...
The parent settings have default values, which come out to different values than the old ones
when using the "value" function formula.
This commit sets the default values at the values as they are calculated from using 0.4mm line widths and 0.3mm min line widths.
2022-03-10 12:30:42 +01:00
Tim Kuipers
c5d2a8d5a1
remove comments
2022-03-10 12:29:51 +01:00
Tim Kuipers
e5548c8e62
description of min line width settings
2022-03-10 12:29:41 +01:00
Tim Kuipers
b79e6d3f32
rename old Min Wall Line Width
...
It had the same name as the new Min Wall Line Width setting.
The old Min Wall Line Width was only used for the outer wall.
2022-03-10 12:14:17 +01:00
Tim Kuipers
48df22fa1f
move Min line width / threshold settings closer to thin wall line width setting.
2022-03-10 12:13:05 +01:00
Tim Kuipers
94898ac212
Don't make min single wall line width the same as the Min Odd Wall Line Width
...
The formula in that setting means that this setting was always the same as the Min Odd Wall Line Width,
but that is not really a natural value for this setting.
The absolute minimum for a line is generally known to be 75% of the nozzle size, so we use that instead.
2022-03-10 12:11:51 +01:00
Tim Kuipers
933f694127
Remove max line width settings and make min line width settings childs of a single parent
2022-03-10 12:09:54 +01:00
3d-hctech
53c46039fa
Add profiles and platforms for 3 new printer from HCTECH
...
It's appreciated that you would merge these profiles and platforms for 3 new printers from HCTECH
2022-03-10 12:17:31 +08:00
Mehmet Sutaş
96c3c48b00
Merge branch 'master' into Rigid3D
2022-03-09 20:22:20 +03:00
Mehmet Sutaş
d2903d2171
Update rigid3d mucit2 and base definition
2022-03-09 20:19:24 +03:00
Jaime van Kessel
441e6ce643
Add resolve values for raft & interface extruders
...
CURA-8981
2022-03-09 16:37:42 +01:00
杜建树
462eebd229
Add new Mingda printers(4H,6H,600Pro,1000Pro)
2022-03-07 21:10:19 +08:00
Christopher Conroy
35b08467cf
fix retraction speed and amount for direct drive afterburner.
2022-03-07 07:52:56 -05:00
杜建树
b85e3978f2
Improving the mingda_base definitions, add some quality parameters
2022-03-07 19:31:37 +08:00
jgrilo-blocks
58505d97bd
add definition files Blocks
...
Definition files to add Blocks printers
2022-03-07 11:06:22 +00:00
Tim Kuipers
4f66ea4cc6
new parent settings for line thresholds
...
This should be more intuitive and more helpful to the user and our own material profile experts
2022-03-04 13:59:14 +01:00
Remco Burema
066a4936e3
Manually revert fuzzy skin disable.
...
Re-implementing this feature for Arachne, so it should be (possible to) enable(d) again.
part of CURA-7887
2022-03-04 07:38:27 +01:00
Tim Kuipers
9eda19c210
Make Wall Ordering option Center Last into its own setting
2022-03-03 09:43:21 +01:00
Tim Kuipers
0e71b9c653
disable 100% infill bottom layers trick for spiralize
2022-03-02 23:41:38 +01:00
杜建树
46018b12a0
Add the meshes to Magician printer
2022-02-26 20:01:20 +08:00
Mingda_js
9e7aca8244
Merge branch 'Ultimaker:master' into master
2022-02-26 19:51:23 +08:00
ANYCUBIC-3D
b116b29f67
remove metadata:icons
2022-02-24 14:52:53 +08:00
Jaime van Kessel
6cbcf09580
Merge branch 'PP-96_update-(un)retract-speeds' of github.com:Ultimaker/Cura
2022-02-23 10:30:00 +01:00
Casper Lamboo
e8c4888f93
Merge pull request #11334 from Ultimaker/variable_walls_stitching
...
Variable walls stitching
2022-02-22 15:32:28 +01:00
Tim Kuipers
5d0454c180
Revert "reenable alternate_walls"
...
This reverts commit 9b43ab3ad7
.
The material_alternate_walls setting was supposed to be disabled.
Something to do with hardware.
See CURA- 8079
2022-02-22 15:29:08 +01:00
Rijk van Manen
209ca566cd
update definitions of ultimaker2+C, S3 and S5
...
These printers have the same feeder and therefore share the same retract settings. The retract speed is set high by default and the unretract speed low by default. This is a safe and good default. PP-96
2022-02-22 14:16:40 +01:00
Jaime van Kessel
b1f2f6af75
Add max values for int settings that didn't have them yet
...
Fixes #11514
See also c8b491e9e7
2022-02-22 11:03:46 +01:00
杜建树
744ee360e2
Add the Magician printer start_gcode and end_gcode
2022-02-21 12:05:30 +08:00
ANYCUBIC-3D
7e59f8de5e
add 3d printer profile for Anycubic Kobra and Anycubic Kobra Max
2022-02-21 10:46:55 +08:00
Sebastiaan Dammann
6ecb99bc2e
Add Creality Ender 3 S1 profile - fixes #11512
2022-02-20 23:31:06 +01:00
Jaime van Kessel
614fe6fd4f
Merge pull request #11023 from NilsRo/master
...
Update anycubic_i3_mega_s.def.json
CURA-8971
2022-02-17 09:48:25 +01:00
NilsRo
dec31d7f44
Update anycubic_i3_mega_s.def.json
...
Deleted travel_compensate_overlapping_wall as property is removed
2022-02-14 19:22:23 +01:00
NilsRo
435e9a7924
Update anycubic_i3_mega_x.def.json
...
Corrected JSON error
2022-02-09 21:01:39 +01:00
Jaime van Kessel
5c7e050b32
Merge branch 'master' of https://github.com/baldaaaa/Cura
2022-02-09 15:16:15 +01:00
Jaime van Kessel
80d2665c1a
Merge pull request #10978 from dagoma3d/dagoma-pro430
...
Add new Dagoma PRO 430 printer
2022-02-09 15:13:55 +01:00
Jaime van Kessel
8c6d97f20c
Merge pull request #11366 from 64bittuning/master
...
Tronxy Profiles 2022 Update
2022-02-09 14:51:23 +01:00
Jaime van Kessel
6e2bcc8f67
Merge pull request #11409 from Ultimaker/CURA-8915_raft_middle_layers
...
Raft Middle Layers
2022-02-09 10:43:14 +01:00
MatiGabaglio
e6b8116873
Update Trimaker Nebula Plus profile
...
We have eliminated the list of excluded materials.
2022-02-08 09:14:22 -03:00
j.delarago
10070cf6eb
Hide following settings when there are no interface layers
...
raft_interface_speed
raft_interface_acceleration
raft_interface_jerk
raft_interface_fan_speed
CURA-8915
2022-02-08 11:33:30 +01:00
j.delarago
e6e2d985a9
Hide following settings when there are no surface layers
...
raft_surface_speed
raft_surface_acceleration
raft_surface_jerk
raft_surface_fan_speed
Remove from raft_surface_extruder_nr since it determines the extruder to get settings from
CURA-8915
2022-02-08 10:54:40 +01:00