jspijker
53d8e0c730
Applied printer-linter format
...
To make sure we have uniform diffs with our PR's
2022-12-30 22:05:41 +01:00
Ghostkeeper
ac23c9df22
Replace STL meshes with 3MF files
...
These are much smaller than their STL counterparts. This saves on download and installation time. Maybe also on loading time.
2020-04-18 22:40:43 +02:00
Ghostkeeper
8e324c594e
Adjust wall thickness to 1 line if using spiralise
...
Except for printers that explicitly override it.
Fixes #7317 .
2020-03-24 14:22:28 +01:00
Ghostkeeper
4a5673746c
Remove unused default_value overrides
...
These are overrides of default_value while there is a value defined. As such these overrides had no effect at all.
Changing them to value can actually change the behaviour of the profile. That is not what the profile author has apparently tested with, so I'm not doing that. I'm just removing the unused data.
In the future if we get new definitions the author gets notified of the error so that he may test more effectively. The legacy can't be fixed without re-testing, so I'm leaving that to the authors.
Done during Turbo Testing & Tooling. I want to go home for the weekend now...
2019-10-18 18:38:16 +02:00
Ghostkeeper
e26e825d83
Overwrite gantry height value instead of default_value
...
Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.
2019-05-13 09:30:32 +02:00
Jack Ha
95f7251486
CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json
2018-06-12 13:39:29 +02:00
Lipu Fei
aba3795d0b
Add extruder definition for all single-extrusion machines
...
CURA-5334
All changed printers:
- 101Hero
- 3dator
- abax_pri3
- abax_pri5
- abax_titan
- alya3dp
- anycubic_i3_mega
- bfb
- bq_hephestos
- bq_hephestos_2
- bq_hephestos_xl
- bq_witbox
- bq_witbox_2
- creality_cr10
- creality_cr10s4
- creality_cr10s5
- dagoma_discoeasy200
- dagoma_neva
- delta_go
- deltabot
- deltacomb
- easyarts_ares
- fabtotum
- folgertech_FT-5
- gmax15plus
- grr_neo
- imade3d_jellybox
- innovo_inventor
- julia
- kemiq_q2_beta
- kemiq_q2_gama
- kossel_mini
- kossel_pro
- kupido
- makeR_pegasus
- makeR_prusa_tairona_i3
- maker_starter
- makerbotreplicator
- malyan_m180
- malyan_m200
- mankati_fullscale_xt_plus
- mendel90
- monoprice_select_mini_v1
- monoprice_select_mini_v2
- peopoly_moai
- printrbot_play
- printrbot_play_heated
- printrbot_simple
- printrbot_simple_extended
- printrbot_simple_makers_kit
- prusa_i3
- prusa_i3_mk2
- prusa_i3_xl
- raise3D_N2_plus_single
- raise3D_N2_single
- renkforce_rf100
- rigid3d
- rigid3d_3rdgen
- rigid3d_hobby
- rigid3d_mucit
- rigid3d_zero
- rigid3d_zero2
- rigidbot
- rigidbot_big
- robo_3d_r1
- seemecnc_artemis
- seemecnc_v32
- tam
- tevo_blackwidow
- tevo_tarantula
- ubuild-3d_mr_bot_280
- ultimaker2
- ultimaker2_extended
- ultimaker2_extended_plus
- ultimaker2_go
- ultimaker2_plus
- ultimaker_original
- ultimaker_original_plus
- uniqbot_one
- vertex_delta_k8800
- vertex_k8400
- zone3d_printer
- zyyx_agile
2018-06-08 17:05:31 +02:00
Ghostkeeper
202f7f87f8
Remove ID from definition files
...
Sometimes it's out of sync. Sometimes even missing. Let's just not use that any more.
Contributes to issue CURA-4243.
2017-11-02 12:53:06 +01:00
Ghostkeeper
4b4f971222
Make 'other' the default category
...
This should make it a bit easier for others to create a new definition since there is less for them to 'have to know'. Previously they would be required to fill in as category Other, but now they can just leave the category out.
2017-08-25 09:17:55 +02:00
Ghostkeeper
c0d96a1d79
Remove heat/cool speeds that are equal to default
...
The default value for both of these settings in fdmprinter is 2.
2017-08-09 09:46:22 +02:00
Ghostkeeper
5392b8f65c
Remove commented-out temperature commands from start g-code
...
Even though it was commented-out, it was still being detected and made Cura think that the start g-code was heating up the nozzles by itself. I've removed the lines so that the normal temperature commands get inserted by Cura automatically.
2017-05-31 09:22:49 +02:00
Clément Bœsch
bf73a76b96
definitions: fix deprecated usage of travel_speed in rigidbot
2017-01-26 13:32:47 +01:00
Tim Kuipers
fb92e50262
JSON fix: fixed all start/end gcode references to settings and non-existent variables
2016-11-11 16:28:43 +01:00
Tim Kuipers
16a07a3c3e
JSON fix: RigidBot had weird outdated enabled formulas for skirt settings (CURA-2410)
2016-10-03 14:41:09 +02:00
Tim Kuipers
9cd6a8c1ae
JSON feat: machine_name as a setting for the 3D printer model type (CURA-2360)
2016-09-13 16:44:55 +02:00
Ghostkeeper
54685e8898
Rename setting skirt_minimal_length to skirt_brim_minimal_length
...
Also updated the description and made it a bit more accurate. Because this concerns not only the skirt, but also the brim.
Contributes to issue CURA-1678.
2016-07-22 17:12:34 +02:00
Ghostkeeper
afb7a45bb0
Translate ancient machine_nozzle_gantry_distance setting
...
It was changed to gantry_height long ago but not updated in these definitions.
Contributes to issue CURA-1278.
2016-05-18 11:48:43 +02:00
Ghostkeeper
a8fc830f2b
Translate ancient machine_head_shape settings
...
It has been machine_head_polygon for a while.
Contributes to issue CURA-1278.
2016-05-18 11:36:45 +02:00
Jaime van Kessel
51e57b1f91
Added visibility meta data
...
CURA-1278
2016-05-18 09:44:53 +02:00
Jaime van Kessel
43d42405b2
Updated property names to new API
...
CURA-1278
2016-05-18 09:39:04 +02:00
Ghostkeeper
35dda003c7
Translate definition for RigidBot
...
Also translated the very old active_if properties!
Contributes to issue CURA-1278.
2016-05-17 17:46:30 +02:00
