ChrisTerBeke
4701518404
Add default position to fdm extruder definition - CURA-4482
2017-10-31 10:23:30 +01:00
Chris ter Beke
9806ec7374
Resolve merge conflicts with master - CURA-4482
2017-10-31 09:22:03 +01:00
ChrisTerBeke
d718e6e36c
Create extruder stack for single extruder machines on start - CURA-4482
2017-10-31 09:08:20 +01:00
Ruben D
93e746b1b3
Warm up to layer_0 temperatures in start g-code
...
Thanks to nounours2099 for the correction.
Fixes #2631 .
2017-10-31 00:23:05 +01:00
alekseisasin
e8bd404904
Merge pull request #2584 from Builder3D/master
...
Add Builder Premium
2017-10-27 10:25:11 +02:00
Ghostkeeper
73e809b956
Remove specialised start g-code from Creality CR-10
...
By request from Michael.
This makes it the same as the start g-code for the Custom FDM Printer, which apparently works better.
2017-10-25 13:20:05 +02:00
Diego Prado Gesto
7404df66ac
CURA-4481 Disable "Remove empty layers" when support is enabled.
...
When support is enabled then it doesn't matter if the user choose
whether to remove or not the empty layers, because it's done after
generating supports. In order to avoid confusion to the user, the
setting is disabled.
2017-10-24 16:46:45 +02:00
Jack Ha
a66d27e30e
CURA-4176 reintroduced Wall Extruder. Added limit_to_extruder trick in wall_line_width as suggested in issue to evade inheritance problems.
2017-10-24 15:01:57 +02:00
Aleksei S
843ccb37cc
Merge branch 'cross_fractal_infill_reimplementation' of https://github.com/BagelOrb/Cura into cross_fractal_infill_reimplementation
2017-10-24 12:54:30 +02:00
Jack Ha
d8e1b5b9b4
CURA-4481 add setting Remove Empty First Layers
2017-10-24 11:25:12 +02:00
Jack Ha
4cfd0de580
CURA-4248 hide settings in UI for Surface Energy and Adhesion Tendency
2017-10-23 14:20:10 +02:00
Tim Kuipers
87c1f1a377
cross_support_density_image setting
2017-10-23 11:35:20 +02:00
Tim Kuipers
6176b939d6
cross_infill_density_image setting
2017-10-23 11:35:20 +02:00
Buco
f1d125b232
Added quality profiles
...
Made some changes to the main profiles and added quality profiles for each material.
2017-10-20 16:09:26 +02:00
ChrisTerBeke
3fcf20c714
Merge pull request #2564 from BagelOrb/slicing_mode
...
Adds a UI setting for the new slicing tolerance option in the engine.
2017-10-20 09:49:05 +02:00
Tim Kuipers
823d11f0e1
rename slicing mode ==> slicing tolerance
2017-10-19 17:14:01 +02:00
Tim Kuipers
4650a12324
slicing mode
2017-10-19 17:14:01 +02:00
Diego Prado Gesto
d3e8915b30
Merge branch 'master' into CURA-4248_BAM
2017-10-19 10:26:25 +02:00
Lipu Fei
475f6223d4
Remove executable bit for json files
2017-10-19 10:24:38 +02:00
ChrisTerBeke
795eda64e3
Merge branch 'master' into CURA-4248_BAM
2017-10-18 15:08:51 +02:00
ChrisTerBeke
78ba3c3aa0
Move BAM equations to BAM quality profiles as they are very specific - CURA-4248
2017-10-18 13:51:06 +02:00
Ghostkeeper
e897431c95
Fix default quality level for Creality CR-10 printers
...
Instead of having a default layer height of 0.2mm, we change the default quality profile to be the one with a layer height of 0.2mm. This fixes up the quality slider.
2017-10-18 13:03:33 +02:00
Tim Kuipers
f1a2da0f8a
also enablew inital layer flow for the UM2
...
the normal flow isn't enabled because that is done in the firmware of the printer. The saem doesn't hold for the initial layer flow.
2017-10-18 11:30:36 +02:00
Tim Kuipers
75203e96de
initial layer flow
2017-10-18 11:21:39 +02:00
ChrisTerBeke
4b6f04604c
Set values for support interface density and pattern depending on BAM settings - CURA-4248
2017-10-17 17:21:40 +02:00
ChrisTerBeke
91589ed29d
Add surface energy property to get correct behaviour - CURA-4248
2017-10-17 13:03:29 +02:00
ChrisTerBeke
d426c259d0
Add material adhesion tendency setting, update support top and bottom distance values - CURA-4248
2017-10-17 12:39:26 +02:00
ChrisTerBeke
5f12b5ac6a
set support interface pattern depending on density - CURA-4248
2017-10-16 17:13:29 +02:00
ChrisTerBeke
69d6ca986d
Update FDM printer definition to calculate PSP - CURA-4248
2017-10-16 16:48:49 +02:00
ChrisTerBeke
a444e5c883
update material xml parser to support psp values - CURA-4253
2017-10-16 15:55:46 +02:00
Buco
95f018530f
Add Builder Premium
...
Tabs became spaces
2017-10-16 13:21:46 +02:00
Ghostkeeper
497327ba73
Merge branch '3.0'
2017-10-12 09:29:09 +02:00
Ghostkeeper
f94954e9ca
Improved end g-code
...
This one removes the hair at the end of this print a bit better.
Contributes to issue EM-1859.
2017-10-12 09:28:50 +02:00
Tim Kuipers
2c73b017a4
trihex infill
2017-10-12 09:26:45 +02:00
Buco
6dc3b29047
Add Builder Premium
...
Add definitions for the Builder Premium Small, Medium and Large printers.
2017-10-11 11:51:39 +02:00
Ghostkeeper
bc419370d0
Merge branch '3.0'
2017-10-06 16:02:13 +02:00
Ghostkeeper
b9045f6b24
Give warning if using some patterns with gradual
...
Cross, Cross 3D, Concentric and Concentric 3D don't work well with Gradual Infill. Lines and zigzag don't work well with Gradual Support Infill (in addition to the previously mentioned patterns) since they aren't alternating in support.
Contributes to issue CURA-4095.
2017-10-06 16:01:53 +02:00
ChrisTerBeke
35dae000a0
Merge branch '3.0'
2017-10-06 10:45:42 +02:00
ChrisTerBeke
798649bce8
Merge branch 'TheAssasin-master' into 3.0
2017-10-06 10:40:34 +02:00
Lipu Fei
185c350a19
Merge remote-tracking branch 'upstream/3.0'
2017-10-05 15:49:18 +02:00
Ghostkeeper
f2ecf41ab1
Fix referencing creality definitions
...
The IDs don't matter, but that little 'a' there does.
2017-10-05 13:44:06 +02:00
Ghostkeeper
aa9ae73e8f
Set minimum layer time to 10 seconds
...
Via inheritance this is applied to all Creality printers.
2017-10-05 13:44:06 +02:00
Ghostkeeper
5cd1825603
Remove 'beta' from names of Creality printers
...
They are now considered stable.
2017-10-05 13:44:06 +02:00
Ghostkeeper
d458fcde5c
Revert "Revert "Merge branch 'fix_garbled_fonts_macos' into 3.0""
...
This reverts commit e07e7bc9e7
.
Contributes to issue CURA-4414.
2017-10-05 10:58:49 +02:00
Ghostkeeper
ff41b043b1
Merge branch '3.0'
2017-10-05 10:58:21 +02:00
Ghostkeeper
e07e7bc9e7
Revert "Merge branch 'fix_garbled_fonts_macos' into 3.0"
...
This reverts commit b62c19206f
, reversing
changes made to 104926c6ed
.
Contributes to issue CURA-4414.
2017-10-05 10:28:54 +02:00
Ghostkeeper
e7153968f0
Merge branch 'feature_raise3d_n2' of https://github.com/fieldOfView/Cura into fieldOfView-feature_raise3d_n2
2017-10-04 17:19:35 +02:00
Ghostkeeper
1d7792861d
Merge branch '3.0'
...
Conflict in ClusterControlItem.qml where there was a new element in Master that wasn't present in 3.0. That element wasn't referenced anywhere else so I just removed it.
2017-10-02 17:40:24 +02:00
Jaime van Kessel
8e4bc433d6
Added missing has_machine_quality tag for UM2
...
CURA-4382
2017-10-02 14:15:13 +02:00
Ghostkeeper
bc53fea8aa
Merge branch 'mb-infill-offset' of https://github.com/smartavionics/Cura into smartavionics-mb-infill-origin
2017-10-02 13:42:07 +02:00