897 commits

Author	SHA1	Message	Date
Jack Ha	22cf5abec2	Merge branch 'master' into refactoring_machine_manager	2018-02-27 10:24:56 +01:00
Ghostkeeper	cde67ab84c	Add warning for low Retraction Min Travel ... Because if you set it to be too close to the line width, you'll get retractions between every skin line.	2018-02-26 14:48:43 +01:00
Ghostkeeper	fc9b2c3529	Limit infill zigzaggify setting to infill extruder ... Let's give it the same properties as the infill pattern setting. Contributes to issue CURA-4017.	2018-02-22 16:44:39 +01:00
Ghostkeeper	dba748bd8a	Add new setting for zig-zaggifying support ... You can now also use the zigzag type patterns for support. Contributes to issue CURA-4017.	2018-02-22 16:43:50 +01:00
Ghostkeeper	6110b83844	Use 'or' instead of '||' for Python code ... Oops. Contributes to issue CURA-4017.	2018-02-21 09:51:14 +01:00
Ghostkeeper	f3aeb01af0	Only enable Connect Infill Lines by default for Cross ... We don't want to change the default behaviour yet. Contributes to issue CURA-4017.	2018-02-21 08:50:49 +01:00
Ghostkeeper	31ad0dd56c	Allow zig-zaggifying infill for patterns other than Cross as well ... It is now supported for any linear-based infill except zigzag (which has its own algorithm; that's a TODO). Contributes to issue CURA-4017.	2018-02-21 08:50:49 +01:00
Diego Prado Gesto	f27685e6ac	CURA-4017 Enable the setting zig_zagiffy_infill for the grid and triangular patterns	2018-02-20 13:56:30 +01:00
Lipu Fei	c469ebbf9f	WIP: Fix material lookup problems and update definition files	2018-02-16 14:23:11 +01:00
Lipu Fei	730cbb25bf	WIP: Simplify machine creation	2018-02-16 14:23:11 +01:00
Ian Paschal	4d3f7d098f	Merge pull request #3299 from Ultimaker/feature_circular_prime_tower ... Circular prime tower functionality Looks good Diego!	2018-02-13 16:01:02 +01:00
Ghostkeeper	f91c990fed	Streamline usage of g-code (vs. GCode, Gcode, G-code, gcode, etc.) ... This makes it all the same. It is something that came up in our translation pass this time. Contributes to issue CURA-4883.	2018-02-13 15:50:59 +01:00
Diego Prado Gesto	18ef3cfc69	CURA-4320 Adjust prime tower settings' formulas for calculating values ... and maximum warning.	2018-02-13 13:16:32 +01:00
Diego Prado Gesto	c6328968db	CURA-4320 Add circular prime tower setting and draw shadow according to ... it.	2018-02-12 14:56:26 +01:00
Ian Paschal	276be2342e	CURA-4940 Use aluminum instead of aluminium ... 🇺🇸	2018-02-09 15:07:14 +01:00
Ghostkeeper	c403d52972	Only limit retraction speed if retraction is enabled ... For some printers the feedrate might be too low for the defaults.	2018-01-30 13:44:18 +01:00
Ghostkeeper	4f72f52447	Reduce minimum value for flow to 0.0001% ... CuraEngine can handle that. It's not going to extrude anything, but neither is 5% really. Contributes to issue CURA-4506.	2018-01-24 16:29:24 +01:00
Ghostkeeper	b9fe0046f2	Merge branch 'initial_layer_flow' of https://github.com/BagelOrb/Cura into BagelOrb-initial_layer_flow ... Contributes to issue CURA-4506.	2018-01-24 16:20:48 +01:00
ChrisTerBeke	b41d8eb0dd	Merge branch '3.2'	2018-01-24 13:29:30 +01:00
Lipu Fei	a6f5f8ea68	Revert "Revert "Rename Enable Travel Optimization to Infill Travel Optimization"" ... This reverts commit 3ec4cc6a0b.	2018-01-23 20:37:24 +01:00
Jack Ha	b0d0b75662	Merge branch '3.2'	2018-01-23 14:25:11 +01:00
Lipu Fei	3ec4cc6a0b	Revert "Rename Enable Travel Optimization to Infill Travel Optimization" ... This reverts commit a31d65786b.	2018-01-23 12:38:51 +01:00
Ghostkeeper	f5e40c2281	Merge branch '3.2' ... Contributes to issue CURA-4797.	2018-01-23 11:27:17 +01:00
Ghostkeeper	a31d65786b	Rename Enable Travel Optimization to Infill Travel Optimization ... Because it's now no longer in the Infill category this is unclear.	2018-01-23 11:24:43 +01:00
Ghostkeeper	23bfa798b1	Merge branch '3.2'	2018-01-22 12:51:39 +01:00
Ghostkeeper	3f81347ef8	Add warning that tree support increases slicing time ... It's much slower than the normal support generation.	2018-01-22 12:51:26 +01:00
Ghostkeeper	ec0fca30a4	Merge branch '3.2'	2018-01-22 12:48:54 +01:00
Ghostkeeper	71cea55bda	Move untested settings to experimental category ... These settings are just some of the settings that were not tested by our materials and processing team.	2018-01-22 12:48:29 +01:00
Ghostkeeper	d1d566bfc0	Merge branch '3.2'	2018-01-18 13:29:36 +01:00
Ghostkeeper	dc08e7f043	Merge branch 'mb-move-wall-order-opt-setting' of https://github.com/smartavionics/Cura into smartavionics-mb-move-wall-order-opt-setting	2018-01-18 13:23:16 +01:00
Lipu Fei	4bc488ca79	Change wording to "Aluminium" ... CURA-4461	2018-01-17 10:50:48 +01:00
Diego Prado Gesto	da4c98b204	Merge branch 'master' into feature_multiple_BP	2018-01-16 09:59:21 +01:00
Diego Prado Gesto	10c9ea68b4	CURA-4461 Change builplate type's label	2018-01-11 13:53:09 +01:00
Diego Prado Gesto	cea9f359cd	CURA-4461 Set active buildplate in the global container stack when is ... changed in the UI. Add a new setting for distinguish between types of build plates.	2018-01-10 14:05:38 +01:00
jack	4751de00ae	Merge pull request #3089 from fieldOfView/feature_support_mesh_enhancements ... Support Mesh enhancements	2018-01-10 11:58:22 +01:00
Jack Ha	b295d915f8	Fix line support_infill_rate / support_line_distance for support meshes without generating any support. CURA-4777	2018-01-10 11:08:32 +01:00
Diego Prado Gesto	342bdda641	CURA-4461 Add missing keys	2018-01-09 13:54:01 +01:00
Diego Prado Gesto	d31eaca1b7	CURA-4461 Add default buildplate temperature setting	2018-01-09 13:35:42 +01:00
fieldOfView	8dd5b166f4	Move 'Drop Down Support Mesh" to "Support" section... ... ... so it can be added as a per model setting for Support Meshes	2018-01-06 22:46:59 +01:00
Ghostkeeper	a717960695	Disallow negative branch angles ... The engine can't really handle that any more. Contributes to issue CURA-4523.	2018-01-05 13:46:05 +01:00
jack	5273fcf238	Merge pull request #2790 from Ultimaker/feature_tree_support ... Tree support	2018-01-04 16:57:52 +01:00
Lipu Fei	d778856025	Merge pull request #3009 from smartavionics/mb-add-infill_enable_travel_optimization ... Added infill_enable_travel_optimization setting.	2018-01-04 15:09:58 +01:00
Jack Ha	d19015e85f	CURA-4523 solved merge conflict	2018-01-04 10:47:24 +01:00
Ghostkeeper	e18b3b3669	Remove duplicate setting ... Some merge conflict, I think. Contributes to issue CURA-4523.	2018-01-03 17:29:49 +01:00
Mark Burton	f82753b766	Move optimize_wall_printing_order from experimental section to shell. ... Still not enabled by default yet but perhaps in the future after it has been tested more it will be.	2018-01-02 09:39:20 +00:00
Ghostkeeper	bf2972200d	Clarify infill/skin overlap setting descriptions a bit ... Discovered during work on CURA-4732.	2017-12-28 18:09:44 +01:00
Mark Burton	97b051907f	Added infill_enable_travel_optimization setting. ... Enabling this can greatly reduce the travel time during the printing of infill but it can be expensive to compute so now the user can decide whether to use it or not.	2017-12-18 14:52:25 +00:00
Ghostkeeper	f538c3a686	Allow support bottom extruder to be set with tree support ... It is now implemented. Contributes to issue CURA-4523.	2017-12-18 15:30:21 +01:00
Ghostkeeper	2451e90370	Increase default resolution for tree support ... Otherwise you get lines falling completely next to the previous layer. Contributes to issue CURA-4523.	2017-12-18 09:57:03 +01:00
Ghostkeeper	948301c531	Remove duplicate setting definition ... I think this was a merge conflict. Contributes to issue CURA-4523.	2017-12-12 09:28:42 +01:00