Lipu Fei
2a695517f7
Remove wall_extruder_nr from fdmprinter
...
CURA-4145
- Remove "wall_extruder_nr"
- Remove all "limit_to_extruder" for all parent wall settings
- Change settings that used to depend on the wall extruder to get
value from the inner wall extruder
2017-08-14 13:21:26 +02:00
Ghostkeeper
cc26d52af3
Revert "Add settings for skipping some zags"
...
This reverts commit a0e59dd6aa
2017-08-14 11:08:28 +02:00
Ghostkeeper
70a0a6ef1c
Fix infill before walls check
...
This could be dependent on either the inner or the outer wall, depending on how many walls you have. However usually it will be the inner wall.
Contributes to issue CURA-4145.
2017-08-14 11:02:32 +02:00
Ghostkeeper
824849a878
Make manufacturer for base fdm- definitions unknown
...
They are always overwritten, but if it isn't overwritten we don't know the manufacturer for the printer.
Contributes to issue CURA-4159.
2017-08-11 12:38:34 +02:00
Ghostkeeper
e1266ceb1f
Change Ultimaker manufacturer to Ultimaker B.V.
...
The material profiles are sent to UM3 with a manufacturer that's obtained from the printer definition rather than the material definition. The printer definition was 'Ultimaker' rather than 'Ultimaker B.V.' and the printer checked against this.
Contributes to issue CURA-4159.
2017-08-11 10:24:13 +02:00
Lipu Fei
1aba451149
Fix value for outer wall_line_width
...
CURA-4145
2017-08-09 13:52:05 +02:00
Ghostkeeper
c0d96a1d79
Remove heat/cool speeds that are equal to default
...
The default value for both of these settings in fdmprinter is 2.
2017-08-09 09:46:22 +02:00
Ghostkeeper
919bc6767c
Disable top surface line directions if there is no top surface
2017-08-08 11:40:19 +02:00
alekseisasin
c5cdf2e206
UM3 Initial layer speed is fixed 20
...
CURA-3377
2017-08-03 15:19:17 +02:00
Ghostkeeper
f298c29d5f
Disallow retraction/prime speeds of 0
...
This would cause divisions by 0.
2017-07-31 13:40:10 +02:00
Lipu Fei
a3a0999df2
Revert "feat: Skin Reference wall settings (CURA-3990)"
...
This reverts commit 3af089cfa0
2017-07-31 10:20:33 +02:00
Lipu Fei
8fc5b2dfee
Revert "better description skin reference wall settings (CURA-3990)"
...
This reverts commit cbc3daf535
2017-07-31 10:20:30 +02:00
Ghostkeeper
b714f0ff3e
Merge branch 'master' of github.com:Ultimaker/Cura
2017-07-28 10:48:21 +02:00
Tim Kuipers
d052511be5
rename: Top Surface Infill ==> Top Surface Skin
2017-07-27 17:11:56 +02:00
Tim Kuipers
693cbd2f9f
fix: don't enable Roffing by default
2017-07-27 17:05:02 +02:00
Lipu Fei
ed525478d6
Merge remote-tracking branch 'upstream/skin_reference_wall'
2017-07-27 14:41:07 +02:00
Lipu Fei
85635b3b83
Reword: Roofing -> Top Surface Infill
...
CURA-3940
2017-07-27 09:34:50 +02:00
Ghostkeeper
8a15d4432b
Merge branch 'remove_some_zags'
...
Contributes to issue CURA-3957.
2017-07-26 17:23:27 +02:00
Lipu Fei
2aa8e590bf
Merge pull request #2056 from Ultimaker/top_most_skin_feature
...
Top most skin feature (CURA-3940)
2017-07-26 14:58:08 +02:00
Lipu Fei
506a0a48f4
Reword: roofing -> top surface infill
...
CURA-3940
2017-07-26 14:26:27 +02:00
Lipu Fei
a0e59dd6aa
Add settings for skipping some zags
...
CURA-3957
2017-07-25 08:53:29 +02:00
Ghostkeeper
74feabacd0
Add warning value for initial layer line width
...
150% seems about right. Then you get a warning value for lines thicker than 0.525mm on a 0.4mm nozzle.
2017-07-24 16:19:59 +02:00
Ghostkeeper
06caedbed8
Update PVA profiles with gradual infill settings
...
These profiles are optimised by hand.
2017-07-24 09:09:14 +02:00
Tim Kuipers
cbc3daf535
better description skin reference wall settings (CURA-3990)
2017-07-23 12:35:09 +02:00
Tim Kuipers
3af089cfa0
feat: Skin Reference wall settings (CURA-3990)
2017-07-23 12:34:58 +02:00
Tim Kuipers
2a758c85e7
Merge branch 'master' into top_most_skin_feature
2017-07-21 15:50:50 +02:00
Lipu Fei
d7f3553c90
Brim Line Count should take into account the initial layer line width factor
...
CURA-4027
2017-07-21 14:39:45 +02:00
Ghostkeeper
4bb95eee36
Apply initial layer line width to skirt lines in prime tower position calculation
2017-07-21 12:56:37 +02:00
Ghostkeeper
66c97259c2
Make prime tower automatic formula the default for all FDM printers
...
The Custom FDM Printer had wrong positions by default as well.
2017-07-21 12:56:37 +02:00
Tim Kuipers
d5be43d45d
roofing: inherit from topbottom (CURA-3940)
2017-07-20 15:42:04 +02:00
Tim Kuipers
d25e227707
Merge branch 'master' into top_most_skin_feature
2017-07-20 12:37:48 +02:00
Ghostkeeper
500211941a
Fix spelling of 'Volumatric'
...
Contributes to issue CURA-3998.
2017-07-18 13:10:16 +02:00
Tim Kuipers
83f6dec28d
rename roofing settings: topmost_skin => roofing (CURA-3940)
2017-07-17 15:51:36 +02:00
Tim Kuipers
141543d7ca
don't enable roofing by default (CURA-3940)
2017-07-17 15:32:57 +02:00
Tim Kuipers
26ac70d2bd
feat: topmost_skin_angles (CURA-3940)
2017-07-17 15:16:11 +02:00
Tim Kuipers
9dcb2c918e
fix: disable topmost skin settings if there is no top skin (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
7b56ba41b1
fix: topmost_skin_extruder_nr enabled function (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
89cafc867e
cleanup: remove superfluous value equal to default_value (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
c91d11fde3
fix: make ironing inherit from topmost_skin rather than top_bottom (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
4754fd51ad
feat: topmost skin: Roofing settings (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
6fc824abd5
fix: make line width factor layer 0 an extruder setting (CURA-4027)
2017-07-17 14:46:00 +02:00
Ghostkeeper
7f1dfcf433
Move prime tower more left
...
Otherwise it intersects with one of the clips on some profiles.
2017-07-14 15:57:08 +02:00
Ghostkeeper
19d9f37bc5
Also subtract support horizontal expansion from prime tower Y position
...
*&@#
2017-07-14 13:43:05 +02:00
Ghostkeeper
8da2ae55cd
Improve prime tower position formula again
...
Basically the entire implementation of BuildVolume.py is in here by now... It's a bit more conservative than BuildVolume but I couldn't find a case where this fails (again).
2017-07-14 13:04:00 +02:00
Jaime van Kessel
dee09e15ae
Added 101hero platform, based on pull request from rmcolbert
...
CURA-4046
2017-07-14 12:59:39 +02:00
Lipu Fei
9b9093cfab
Merge pull request #2105 from maukcc/cura/master
...
Cartesio extruders start positions
2017-07-13 12:43:35 +02:00
Ghostkeeper
5ad4c58055
Take travel avoid distance into account with prime tower position
...
Otherwise you can't print if platform adhesion is off.
2017-07-13 12:42:58 +02:00
Ghostkeeper
a84a2922b6
Merge branch 'master' of github.com:Ultimaker/Cura
2017-07-13 09:05:55 +02:00
Lipu Fei
6cae413766
Treat initial_layer_line_width_factor as a percentage instead of factor
...
CURA-4036
initial_layer_line_width_factor is a percentage ranging from 0 to 100,
so when calculating the prime tower position, we need to divide it by
100.
2017-07-13 08:58:41 +02:00
Lipu Fei
bcd93522a2
Use bool instead of str for default_value of fill_outline_gaps
...
CURA-4023
2017-07-13 08:44:44 +02:00
