Remco Burema
667a27e2d2
change setting-version for base definitions as well (5.9 -> 5.10)
...
part of CURA-12359
2025-02-26 16:49:50 +01:00
Erwan MATHIEU
3458ce1d10
Merge pull request #20297 from Ultimaker/PP-571-Improve-multi-material-printing-quality-S8
...
PP-571-Improve-multi-material-printing-quality-S8
2025-02-21 11:23:50 +01:00
Alan Bjorklund
94e57a1155
Sprint Tree Supports Update
...
The tree supports inherited settings that
were tuned for Normal Support. The support floor
connection to model roofs was weak, and causing
some trees to detach (depending on the model
geometry). Sometimes the nozzle to collided
with the broken support, and resulted in XY shifts,
and the fan cover disconnecting while printing.
Additionally, I adjusted the support Z distance
values for layers heights > 0.2.
The new settings allow for better tree support
adhesion, improving the print success rate.
PP-573
2025-02-20 16:29:07 -05:00
THeijmans
0ba901e345
PP-571 Improve multi-material printing quality S8
2025-02-20 14:17:34 +01:00
Remco Burema
6cdd537f89
Merge pull request #20200 from Ultimaker/PP-538_Replicator-plus
...
PP-538 Initial Profiles for Replicator+
2025-02-19 10:15:15 +01:00
HellAholic
f1b5da20d4
Merge branch 'main' into CURA-12416-adjustment_for_unit_tests
2025-02-14 15:45:30 +01:00
HellAholic
26cac4a131
Revert "Update ultimaker_s8.def.json"
...
This reverts commit 0771b38c91
2025-02-14 15:34:19 +01:00
HellAholic
524ec70012
Revert "Update ultimaker_s8.def.json"
...
This reverts commit 63429d7626
2025-02-14 15:33:25 +01:00
Frederic Meeuwissen
ac06e913d2
Remove non-existent "support_density" setting
2025-02-14 15:24:23 +01:00
HellAholic
cbb63249b3
Apply printer-linter format
2025-02-14 14:20:56 +00:00
HellAholic
f2389104a9
Setting override name correction skirt_brim_speed
2025-02-14 15:19:45 +01:00
HellAholic
5229844eed
Merge pull request #20191 from Ultimaker/CURA-12335_expose-bottom-skin-settings
...
CURA-12335 Add extra settings for flooring on the basis of roofing
2025-02-14 14:39:36 +01:00
HellAholic
0771b38c91
Update ultimaker_s8.def.json
2025-02-14 14:25:00 +01:00
HellAholic
63429d7626
Update ultimaker_s8.def.json
2025-02-14 14:17:29 +01:00
HellAholic
d83547e3f2
Merge pull request #20198 from Ultimaker/PP-550-PCABS
...
PP-550 PC-ABS & PC-ABS-FR 175
2025-02-14 10:26:02 +01:00
HellAholic
84b60cb00d
Merge branch 'main' into CURA-12335_expose-bottom-skin-settings
2025-02-14 10:08:16 +01:00
Frederic98
0598ebec6f
Apply printer-linter format
2025-02-13 07:23:45 +00:00
Frederic Meeuwissen
dd742e6c4e
[PP-535] Correct the BOM number in FW update
2025-02-13 08:22:21 +01:00
Frederic Meeuwissen
fbe5e4f6c0
[PP-535] Publish S8 profiles
2025-02-12 15:57:45 +01:00
Erwan MATHIEU
b1dda135fd
Merge branch 'main' into PP-538_Replicator-plus
2025-02-11 16:36:01 +01:00
Erwan MATHIEU
74f7f43754
Merge branch 'main' into PP-550-PCABS
2025-02-11 14:05:21 +01:00
HellAholic
d5649ace05
Merge pull request #20201 from Ultimaker/Kedge-Draft-PP-561
...
PP-561 0.27 layer height options for Sprint
2025-02-10 11:45:13 +01:00
Alan Bjorklund
c0a734a1ac
Corrected Rep+ zero speed values
...
Some speed values were set to zero accientally,
these updates ensure that all speed params have
non zero values.
Also, I noticed some temperatures were not correct.
I added a few changes to correct layer_0, initial,
and final print temperature values.
The default print temp is still not correct, I will
submit another commit for this.
PP-538
2025-02-07 17:35:05 -05:00
HellAholic
cc7eb2c218
Merge branch 'main' into PP-550-PCABS
2025-02-07 16:45:06 +01:00
HellAholic
53f4046a51
Merge pull request #20129 from Ultimaker/PP-544-HS-Method
...
Add intent profiles for Method High Speed
2025-02-07 13:24:32 +01:00
Erwan MATHIEU
8a77993d0b
Merge branch 'main' into Kedge-Draft-PP-561
2025-02-06 16:18:42 +01:00
Erwan MATHIEU
4c6acca3f8
Merge branch 'main' into PP-538_Replicator-plus
2025-02-06 16:14:45 +01:00
Erwan MATHIEU
235114ba53
Merge remote-tracking branch 'origin/main' into PP-550-PCABS
2025-02-06 16:10:04 +01:00
HellAholic
4be40f770c
Merge branch 'main' into CURA-12352_different-minimum-layer-time-for-layers-that-contain-overhangs
2025-02-03 10:05:10 +01:00
HellAholic
a695a27408
Merge branch 'main' into CURA-11966_reduce-speed-on-overhang
2025-02-03 09:54:36 +01:00
HellAholic
1b485824cf
Merge branch 'main' into PP-535_add_pa_setting
2025-01-30 08:48:41 +01:00
HellAholic
654150526e
Merge branch 'main' into CURA-12335_expose-bottom-skin-settings
2025-01-29 15:50:00 +01:00
HellAholic
49cc44b4ec
Merge pull request #19983 from Ultimaker/fix_crash_on_material_management_sovol_sv01
...
"Sovol Base Bowden Printer" update to add resolveOrValue to retraction_speed override
2025-01-29 14:02:51 +01:00
HellAholic
40f738f15f
Applied printer-linter format
2025-01-29 12:49:58 +00:00
HellAholic
0680a21670
apply review comment
2025-01-29 13:48:59 +01:00
HellAholic
72e38534e6
Merge branch 'main' into CURA-11966_reduce-speed-on-overhang
2025-01-29 10:47:22 +01:00
Frederic Meeuwissen
eec90b5bdc
[PP-535] Add pressure advance setting
2025-01-29 09:35:28 +01:00
Alan Bjorklund
859327b3ba
Sketch infill line width update
...
Add logic that sets the infill width to 0.4
when the layer height is not equal to 0.2.
The infill width at 0.45mm was causing the
flow rate to be > 30 mm^3/s for 0.27 Balanced
prints. This update corrects the flow rate issue.
PP-561
2025-01-28 17:42:57 -05:00
Alan Bjorklund
8db6c820aa
Initial Profiles for Replicator+
...
Add definition for Replicator+, along
with three extruders: SE+, SE+ Tough,
and SE+ Experimental.
Add Replicator+ settings for PLA & TPLA.
These are similar to Method settings,
with some first layer adjustments.
PP-538
2025-01-27 17:03:00 -05:00
Erwan MATHIEU
caa944e226
Merge branch 'main' into PP-552-Metallic-PLA
2025-01-27 13:53:42 +01:00
Erwan MATHIEU
51a7cb1f90
Add extra settings for flooring on the basis of roofing
...
CURA-12335
2025-01-27 10:05:52 +01:00
Erwan MATHIEU
8fca5d9c69
Merge branch 'main' into PP-544-HS-Method
2025-01-24 10:32:58 +01:00
HellAholic
bbf7b4dde0
Merge branch 'main' into CURA-12362_Cheetah_flavor
2025-01-23 10:41:38 +01:00
HellAholic
e8b2abad1e
Merge branch 'main' into flip_toolhandle_y_description
2025-01-23 09:58:27 +01:00
HellAholic
0f0af30761
Merge branch 'main' into CURA-12362_Cheetah_flavor
2025-01-22 13:38:45 +01:00
Erwan MATHIEU
a13726bba1
Move interlocking settings out of experimental
...
CURA-12247
Also set interlocking_enable to basic settings because it is quite important and just enabling it doesn't require advanced knowledge/skills.
2025-01-22 09:54:20 +01:00
Alan Bjorklund
a6c9531932
PC-ABS & PC-ABS-FR 175 Updates
...
Add PC-ABS & PC-ABS-FR intent and quality files
for Method X & Method XL. These materials pair with
1C, 1XA and Labs extruders.
Exclude PC-ABS and PC-ABS-FR from sketch printers
and Method.
PP-550
2025-01-21 16:22:27 -05:00
Erwan MATHIEU
ffb4521059
Merge branch 'main' into CURA-11966_reduce-speed-on-overhang
2025-01-20 14:53:55 +01:00
HellAholic
e6d2281f32
Merge branch 'main' into CURA-12352_different-minimum-layer-time-for-layers-that-contain-overhangs
2025-01-17 14:10:23 +01:00
rburema
fbe871778a
Apply printer-linter format
2025-01-16 12:28:50 +00:00
