6967 commits

Author	SHA1	Message	Date
Joey de l'Arago	b3eb5270f9	Merge pull request #11706 from Ultimaker/CURA-7810_remove_deprecated_functions ... Remove deprecated functions	2022-03-25 14:42:20 +00:00
Jaime van Kessel	894615914a	Merge branch 'new-splashscreen' of github.com:Ultimaker/Cura	2022-03-25 10:49:16 +01:00
Jaime van Kessel	1532779d1b	Remove Extruders property from global stack ... CURA-7810	2022-03-24 14:26:03 +01:00
Jaime van Kessel	74eac8f4b9	Remove printeroutput model ... CURA-7810	2022-03-24 13:41:10 +01:00
Jaime van Kessel	e925f07aad	Remove old arranger code ... Major vesion upgrade, time to clean some stuff up! CURA-7810	2022-03-24 13:37:29 +01:00
Jaime van Kessel	4d02894582	Remove cura.PrinterOutputDevice ... Since we are moving up a major version, time to clean up deprecation warnings CURA-7810	2022-03-24 13:27:27 +01:00
Jaime van Kessel	fa1554a62e	Merge branch 'fix_disallowed_brim_gap_distance' of github.com:Ultimaker/Cura	2022-03-22 15:23:32 +01:00
10r3n20	044c3e9da2	updated splash screens	2022-03-16 17:03:03 +01:00
Jaime van Kessel	daa4c20df4	Use intConversion instead of Str for extruder & optionalExtruder ... CURA-8981	2022-03-16 11:08:28 +01:00
Jaime van Kessel	1632527651	Prevent crash when switching extruder in profiles page	2022-02-21 15:40:08 +01:00
Jaime van Kessel	f682f56923	Merge branch 'master' of github.com:Ultimaker/Cura into replace_controls_1_for_controls_2	2022-02-17 15:02:03 +01:00
10r3n20	4383f2ddf2	adjusted colors and size of origin gizmo	2022-02-15 16:45:57 +01:00
Tim Kuipers	c308e2d7d2	fix disallowed areas taking brim_gap into account	2022-02-11 11:26:26 +01:00
Ghostkeeper	7f8591718d	Remove central messageBox in favour of local box ... The profile import/export was the only place where it was used, in our code base. Contributes to issue CURA-8687.	2022-02-04 14:31:27 +01:00
Ghostkeeper	3534894eeb	Don't mark interface extruder as used when there are none ... If there are 0 interface layers, the extruder doesn't necessarily gets used. Contributes to issue CURA-8915.	2022-02-03 15:59:21 +01:00
Ghostkeeper	5cc8fdeb7a	Count multiple raft interface layers ... We need the raft thickness to determine the maximum height of the model. If using multiple interface layers, this height should be reduced. Contributes to issue CURA-8915.	2022-02-03 15:55:31 +01:00
Ghostkeeper	5c71671585	Make setting names italic if changed in quality-changes profile ... This was the behaviour before. Contributes to issue CURA-8686.	2022-01-26 14:00:29 +01:00
Ghostkeeper	5e5e0febb9	Format calculated functions in QualitySettingsModel itself ... That way we don't have to re-format it in the display in the table. Contributes to issue CURA-8686.	2022-01-26 11:33:42 +01:00
Ghostkeeper	efcd00e2f3	Merge branch 'master' into marketplace_redesign ... Conflicts: plugins/DigitalLibrary/resources/qml/SelectProjectPage.qml -> Some things were probably accidentally committed here and then later also changed in master.	2022-01-20 15:57:28 +01:00
Jelle Spijker	74829f5642	Merge pull request #11196 from Ultimaker/CURA-8592_python_3.10 ... Upgrade to Python 3.10	2022-01-18 12:26:45 +01:00
Casper Lamboo	41f1029dc0	Use updated python type notation	2022-01-14 09:07:41 +01:00
Ghostkeeper	403d92a760	Fix getting used and starting extruders with new adhesion extruder settings ... Getting more involved than I thought. But it's not complex yet. Contributes to issue CURA-8868.	2022-01-12 14:29:01 +01:00
Ghostkeeper	304f57293d	Adjust build volume depending on new adhesion extruder sub-settings ... It should get these settings from the correct extruders even if they are different from one another. Contributes to issue CURA-8868.	2022-01-12 14:09:57 +01:00
Gabriel Féron	aad41807c3	Remove unused import of sentry_sdk	2022-01-11 20:28:41 +01:00
Ghostkeeper	f4d60b38ee	Shorten two texts of 'Sync materials with printers' ... In most languages this doesn't properly fit in the space we have for these buttons. The same text in the window title and header was not changed. There we do have space for it. The button in the material manager was also not adjusted since it's different and already about as short as can be (but needs to refer to printers instead of materials due to the context of already being in the material manager). Contributes to issue CURA-8753.	2022-01-10 17:28:45 +01:00
Jaime van Kessel	6e4143ba59	Merge branch '4.13' of github.com:Ultimaker/Cura	2022-01-05 14:08:00 +01:00
Ghostkeeper	ab0c03cf65	Catch KeyError['empty_material'] when evaluating whether there's any profiles ... This is currently only used in the pre-read of workspaces. In some cases, the project file may have a material that is not compatible with its own stack using the current rules in Cura, either because the rules changed or because the project file is wrongly crafted/edited. This causes Cura to say there are no quality profiles if the material profile is not compatible with the printer, preventing a crash due to the KeyError.	2022-01-05 10:26:28 +01:00
Ghostkeeper	652043e1d8	Cast bounding box to ints ... The version of Sip we're using now cares about this more than the previous one, apparently. Contributes to issue CURA-8592.	2022-01-03 17:32:33 +01:00
Ghostkeeper	9118f20193	Merge branch 'CURA-8592_python_3.10' of github.com:Ultimaker/Cura into CURA-8592_python_3.10	2022-01-03 16:37:07 +01:00
Ghostkeeper	770eb03d62	Remove references to Shapely ... This has been replaced with PyClipper so we don't need to import Shapely any more. Clipper doesn't give any exceptions as far as I know. Contributes to issue CURA-8592.	2022-01-03 16:34:40 +01:00
Jaime van Kessel	3bfea5b970	Ensure that stored log lines are sent to sentry if they haven't already been logged ... CURA-8760	2022-01-03 14:10:36 +01:00
Jaime van Kessel	7deeb26e13	Merge branch 'marketplace_redesign' of github.com:Ultimaker/Cura into CURA-8588_replace_toolbox_with_marketplace	2022-01-03 11:32:06 +01:00
Ghostkeeper	a878cfae7a	Merge branch 'master' into marketplace_redesign	2021-12-31 14:07:51 +01:00
Ghostkeeper	05bbebf2f7	Remove traces of Shapely ... It's been replaced by Pyclipper. We were only importing Shapely here, not actually using it. Contributes to issue CURA-8592.	2021-12-31 14:06:31 +01:00
Remco Burema	b794ad6ed2	Delete old 'Toolbox' in favour of new Marketplace. ... part of CURA-8588	2021-12-30 11:51:54 +01:00
Jaime van Kessel	6dac500f18	Simplify getAllLocalPackages ... CURA-8587	2021-12-20 10:34:37 +01:00
Jaime van Kessel	477f62916c	Further simplify the data being sent over to the package manager ... CURA-8587	2021-12-16 23:21:44 +01:00
Ghostkeeper	385c02f0bd	Merge branch '4.13'	2021-12-16 17:17:08 +01:00
Ghostkeeper	5a9bafe453	Update SDK version to 7.9.0 ... This is going to be the new SDK version for Cura 4.13.	2021-12-16 17:15:59 +01:00
Jaime van Kessel	d59cd602ee	FIx failing mypy test ... CURA-8083	2021-12-16 10:00:11 +01:00
Jaime van Kessel	6c64e08299	Fix typing of scaleAreas ... The change in e5be3e56dc wasn't quite correct CURA-8083	2021-12-16 09:58:09 +01:00
casper	e5be3e56dc	Use correct definition of Polygons ... Only saw this error after the merge so pushing directly to master. part of CURA-8083	2021-12-15 17:48:20 +01:00
Casper Lamboo	7c7a1016d0	Merge pull request #11075 from Ultimaker/CURA-8083_separate_z_shrinkage_comp ... [CURA-8083] Separate Vertical and Horizontal Shrinkage Compensation.	2021-12-15 17:40:27 +01:00
Jelle Spijker	0ffaafc8c0	Revert "Simplify CuraPackageManager" ... This reverts commit 33f1bd8c5d.	2021-12-15 16:39:02 +01:00
Jelle Spijker	9e1e98bdbd	Revert "Show install button after package has been uninstalled" ... This reverts commit c66e17dd9e.	2021-12-15 16:38:54 +01:00
casper	c66e17dd9e	Show install button after package has been uninstalled ... CURA-8587	2021-12-15 15:13:38 +01:00
casper	33f1bd8c5d	Simplify CuraPackageManager ... CURA-8587	2021-12-15 14:18:40 +01:00
Remco Burema	f51cc84a7c	Temporary? solution for UX w.r.t. material shrinkage. ... Material shrinkage now alters both the disallowed areas+, and the blue wireframe, toghether repressenting the usable build-volume. This doesn't shrink the build-plate/printer model, still keeping in line with the 'show the size of the result object in Prepare, not the resized one we do print becasue it will shrink later' principle we had originally agreed on enough. Note that the disallowed areas also take the object themzelves into account, so the user could still tell when objects are going to be printed overlapped (as the dissalowed areas of those respective models then overlap -- but not, of course, the models themselves). part of CURA-8083	2021-12-15 12:50:01 +01:00
Jaime van Kessel	03398422dd	Merge branch '4.13' of github.com:Ultimaker/Cura	2021-12-15 12:04:19 +01:00
Jaime van Kessel	998ba3631c	Add missing format to error log	2021-12-15 12:03:55 +01:00