Matteo Spinelli
eca2f5f6ba
change from snap_distance to minimum_polygon_circumference
2018-08-28 08:01:51 +02:00
Matteo Spinelli
8c4117541c
Update Peopoly moai definitions and files
2018-08-28 08:01:51 +02:00
Thomas Karl Pietrowski
82570ee35f
bq Hephestos2: Getting a rid of custom g-code
...
* Getting a rid of M800:
This removes M800 completely. The problem is basically that M800 sets the temperature to 200deg.
As a result we tell the firmware to heat up to e.g. 205deg, then M800 kicks in and sets the temperature to 200deg and then we heat up to 205deg again.
Therefore I looked into the firmware and extracted all g-code lines except the one which tells to go to 200deg.
* Getting independent of bq's fork and therefore adding compatibility to Marlin
We use standard g-code, which is safe to be used with both firmware.
Note: This change might be also interesting for other bq products, but can't test on them. Therefore it is up to bq and/or the owners of these products to contribute and correct this here, as I did.
2018-08-25 14:46:21 +02:00
Ghostkeeper
aa03fabc57
Remove trailing whitespace
2018-08-24 15:24:00 +02:00
fieldOfView
c1d7ca7bff
Merge branch 'master' into feature_firmware_updater
2018-08-22 12:16:25 +02:00
Mark Burton
b9f1f8c400
Add machine_extruder_cooling_fan_number setting to specify print cooling fan for each extruder.
2018-08-21 19:44:21 +01:00
Lipu Fei
10e474ad27
Add draft shield distance into the prime tower position fomulas
...
CURA-5644
2018-08-21 13:38:56 +02:00
alekseisasin
4b5cc59508
Merge pull request #4144 from smartavionics/mb-add-combing-mode-within-infill
...
Added the "Within Infill" combing option that functions identically to the original "Not in Skin" option.
2018-08-20 12:50:41 +02:00
Jack Ha
376b6a53c9
Capital Letters In Setting Name. CURA-5623
2018-08-16 13:47:32 +02:00
Jack Ha
44eb372cb8
Merge branch 'patch-1'
2018-08-16 13:45:33 +02:00
Jack Ha
6c1d380602
Renamed snap_distance to minimum_polygon_circumference and changed the description a bit. CURA-5623
2018-08-16 13:45:27 +02:00
Diego Prado Gesto
de1b8edb72
Merge branch 'master' into CURA-5570_beyond_comprehension
2018-08-13 09:57:36 +02:00
fieldOfView
b9ac567123
Fix description of the setting
2018-08-09 09:32:38 +02:00
ValentinPitre
ea770a26a3
Add mesh offset
2018-08-08 23:23:32 +02:00
fieldOfView
c3504fb223
Add setting for Support Infill Line Direction
2018-08-08 20:47:22 +02:00
Ghostkeeper
58e5a81236
Fix units for initial layer print/travel acceleration
...
These two were wrong.
Contributes to issue CURA-5495.
2018-08-07 13:10:03 +02:00
Tim Kuipers
bc0a53c15a
JSON fix: only enable skin settings when there is skin
2018-08-06 10:38:21 +02:00
DavidGergely
ea8d10783c
Cura-5457 prime tower settings
...
New settings for the prime towers for all profiles expect PP0.8 printcore
2018-08-03 14:12:36 +02:00
Diego Prado Gesto
c7dbb478a8
Merge pull request #4120 from milkok/patch-5
...
Create winbo_dragonl4.def.json
2018-08-03 09:28:39 +02:00
Diego Prado Gesto
5913903d1e
Merge pull request #4119 from milkok/patch-4
...
Create winbo_mini2.def.json
2018-08-03 09:28:13 +02:00
milkok
85575f6782
Update winbo_dragonl4.def.json
2018-08-03 09:58:23 +08:00
milkok
7157118889
Update winbo_mini2.def.json
2018-08-03 09:53:25 +08:00
Matteo Spinelli
e817d94a83
Add user editable snap distance
...
This PR requires an update to CuraEngine as well (I'm posting the update right after)
2018-08-02 17:30:06 +02:00
Lipu Fei
066a00653a
Add one more layer to the decision tree
2018-08-02 17:15:34 +02:00
fieldOfView
339987be9d
Move hardcoded firmware-file table to definitions
2018-08-02 11:50:28 +02:00
Diego Prado Gesto
f968b4f62d
Merge branch 'master' into ValentinPitre-contribution
2018-08-01 16:54:42 +02:00
Jack Ha
be177939b5
Reverts other commit bound to CURA-5563, that was not correct.
2018-07-31 17:09:33 +02:00
Diego Prado Gesto
5dc993bb49
Merge branch 'contribution' of https://github.com/ValentinPitre/Cura into ValentinPitre-contribution
2018-07-31 09:07:27 +02:00
root
2584d58904
correction extruder
2018-07-30 22:51:02 +02:00
Diego Prado Gesto
ee2b1ef7d2
Merge pull request #4118 from milkok/patch-3
...
Create winbo_superhelper155.def.json
2018-07-30 11:34:31 +02:00
Diego Prado Gesto
b176a75028
Merge pull request #4117 from milkok/patch-2
...
Create winbo_superhelper105.def.json
2018-07-30 10:48:55 +02:00
root
2ef48c725e
add new definition/quality/mesh of 3D printer by TiZYX
2018-07-28 16:13:14 +02:00
milkok
380ab22c42
Update winbo_mini2.def.json
2018-07-28 17:19:13 +08:00
milkok
29f2bb8a3a
Update winbo_dragonl4.def.json
2018-07-28 17:15:36 +08:00
milkok
29f9beb550
Update winbo_superhelper105.def.json
2018-07-28 17:06:23 +08:00
Tim Kuipers
e1db7eb831
setting: infill_wall_line_count
2018-07-28 09:59:19 +02:00
Aleksei S
729569034d
Rename setting Raft Line Spacing -> Raft Base Line Spacing
2018-07-27 16:12:29 +02:00
kaleidoscopeit
3707871f0b
- Fixed extruder behaviour to force filament diameter to 1.75
2018-07-27 15:51:56 +02:00
Mark Burton
b8cca17d46
Added the "Within Infill" combing option that functions identically to the original "Not in Skin" option.
...
I've tweaked the blurb to let people know that the original behaviour is still available.
2018-07-27 10:01:16 +01:00
Mark Burton
aa8535f374
Merge remote-tracking branch 'upstream/master' into mb-improve-overhanging-walls
2018-07-26 21:07:17 +01:00
Lipu Fei
9584b8c579
Bind Top Surface Skin Layers value to Top Surface Skin Extruder
...
CURA-5563
Otherwise, if you set the layers to 2 for extruder 1 and use extruder 2
for Top Surface Skin, it will use the Top Surface Skin Layers value from
extruder 2, which is most likely 0, and no top surface skin layers will
be printed.
2018-07-26 13:54:20 +02:00
Diego Prado Gesto
e8f095f245
Merge pull request #4090 from Ultimaker/dagoma3d-dagoma_profiles
...
Add and fix Dagoma3D profiles
2018-07-26 13:51:14 +02:00
Tim Kuipers
9c6b676660
fix: typo in setting formula
2018-07-26 10:10:30 +02:00
alekseisasin
f5fb336439
Merge pull request #3827 from BagelOrb/connect_multiply_infill
...
Connect Infill Polygons AND Multiply Infill
2018-07-25 13:47:32 +02:00
Tim Kuipers
8ccc33d302
make connect_infill_polygons true by default
...
concentric_3d was removed and then the value function is the same as the enabled function, so the default value should be true
2018-07-24 22:09:09 +02:00
Tim Kuipers
5cb5e63dcc
setting fix: make Connect Infill Polygons available for Multiplied Infill
2018-07-24 22:09:09 +02:00
Tim Kuipers
285f136856
settings: connect_skin_polygons and connect_infill_polygons
2018-07-24 22:09:09 +02:00
Tim Kuipers
3f4aa0abaf
allow zig_zaggify for linear infill because of infill_multiplier
2018-07-24 22:09:09 +02:00
Tim Kuipers
790321833b
setting description and enabled fixes to infill_multiplier
2018-07-24 22:09:09 +02:00
Tim Kuipers
31d1c9f92c
setting for infill_multiplier
2018-07-24 22:09:09 +02:00
