material_shrinkage_percentage_xy and material_shrinkage_percentage_z cannot depend on material_shrinkage_percentage otherwise their resolve function will not execute properly.
I noticed that the shrinkage factors do not get the correct value if a wrong nozzle is chosen for a material. However, in that case the slicer will also not slice, so in practice this is not an issue
Relates to PP-77
New calculations to determine the average shrinkage when two materials are used. By default the material shrinkage is set to null (None). In that case the shrinkage of that material is not taken into account in the new averaging formula. Support materials such as PVA, BAM, Aquasys etc. should keep this setting to null. When two materials are used with a shrinkage percentage the average of these two materials will be used.
Relates to PP-77
We will only support the Inwards Distributed strategy type from here on out. You can achieve a similar result as that one by adjusting the Wall Distribution Count setting (1 is Center Deviation, 2 is Inwards Distributed, 999999 approximates Distributed).
Contributes to issue CURA-8466.
We've removed a bunch of settings and transformed others. To allow profiles to be checked for these and edited if necessary, we now need to increment this version number.
Contributes to issue CURA-8466.
It is no longer used since we've removed the Fill Gaps Between Walls setting. This setting is no longer referred to from CuraEngine.
Contributes to issue CURA-8466.
With the new brim algorithms the brim will never be generated outside of the volume.
It's nice to be able to input 9999 if you want the brim to cover the whole build plate...
... for testing purposes ;)
Adding and splitting of lines results in print artefacts and additional travel moves. Avoiding these by sacrificing some additional line width change is better. The linewidth can never very more then 75% - 150%, so this long filter distance cannot cause huge line width changes. PP-129
The top bottom is a 100% density part of the print. For these parts it is super important to not over extrude. At the same time we dont want an underextruded top layer, since that is looking ugly. That is why we enable a roofing layer and reduce the flow for the rest of the top/bottom. PP-93
The parent settings have default values, which come out to different values than the old ones
when using the "value" function formula.
This commit sets the default values at the values as they are calculated from using 0.4mm line widths and 0.3mm min line widths.
