960 commits

Author	SHA1	Message	Date
Lipu Fei	7d8472e588	Merge remote-tracking branch 'origin/3.4'	2018-05-31 12:25:33 +02:00
Ian Paschal	d68b44791b	Merge pull request #3479 from smartavionics/mb-wall-min-flow ... Added wall_min_flow and wall_min_flow_retract settings.	2018-05-30 13:44:21 +02:00
Ghostkeeper	86d4f0583c	Make showing of support density image dependent on support pattern ... Because that's what it's actually depending on. Contributes to issue CURA-4513.	2018-05-30 13:37:25 +02:00
Ghostkeeper	6ea5924c95	Remove Try Multiple Line Thicknesses setting ... This setting is now always enabled, hard-coded in the engine.	2018-05-30 10:35:50 +02:00
Ian Paschal	47bd94608a	Merge pull request #3413 from BagelOrb/infill_support ... settings for infill support	2018-05-29 13:13:35 +02:00
Ghostkeeper	ab2503834b	Remove Hollow Out Objects setting ... It has been replaced by Infill Support. Contributes to issue CURA-5108.	2018-05-29 12:51:21 +02:00
Tim Kuipers	373555fa4a	settings for infill support	2018-05-29 12:50:51 +02:00
Ghostkeeper	504889b472	Remove Alternate Cross 3D Pockets setting ... It is no longer used in the new implementation of cross infill.	2018-05-29 07:31:59 +02:00
Ian Paschal	220c99cf3b	Merge pull request #3613 from maximkulkin/avoid-printed-supports ... Add travel_avoid_supports setting support	2018-05-24 15:36:40 +02:00
Ghostkeeper	a74b6047e7	Merge branch 'cross_fractal_infill_reimplementation'	2018-05-16 16:25:38 +02:00
Aleksei S	27c8b43133	Added setting "support_wall_count" to the expert setting's visibility list	2018-05-15 16:43:02 +02:00
alekseisasin	1756a952ae	Merge pull request #3412 from BagelOrb/support_wall_count ... support_wall_count setting	2018-05-15 16:35:40 +02:00
Maxim Kulkin	9cb3960690	Add travel_avoid_supports setting support	2018-05-14 23:43:05 -07:00
Diego Prado Gesto	b8d442a1ac	Merge pull request #3760 from fieldOfView/fix_missing_units ... Add some missing units to machine settings	2018-05-04 15:07:09 +02:00
jack	10e83e8653	Merge pull request #3477 from smartavionics/mb-retract-on-long-combs ... Added retraction_combing_max_distance setting	2018-05-01 15:34:54 +02:00
fieldOfView	51ebb351eb	Add some missing units to machine settings	2018-05-01 12:35:02 +02:00
Ghostkeeper	21bbfe1313	Set maximum travel resolution depending on travel speed ... To ratio of travel speed vs. print speed. Contributes to issue CURA-5171.	2018-05-01 11:01:14 +02:00
Ghostkeeper	ebca457f39	Add setting for maximum travel resolution ... I'm making this settable per extruder since a travel move is made with a certain active nozzle but can be between meshes so it can't be a per-mesh setting. I wouldn't know why you would want to set it differently per extruder though, but you can... Contributes to issue CURA-5171.	2018-05-01 09:21:36 +02:00
Ghostkeeper	e43e9ad117	Merge branch '3.3'	2018-04-17 13:56:46 +02:00
Ghostkeeper	b744302557	Merge branch 'M&P-Setting-Optimization' into 3.3	2018-04-17 13:56:11 +02:00
Ghostkeeper	455abb15bf	Consistently use capital letters for CLI settings too ... They're not actually visible, but in case they are made visible by modifying the preferences file...	2018-04-16 12:36:17 +02:00
Ghostkeeper	133f6f43fe	Merge branch '3.3'	2018-04-13 16:14:23 +02:00
Jaime van Kessel	5d1d426037	Merge branch 'master' of github.com:Ultimaker/Cura	2018-04-12 21:56:13 +02:00
Jaime van Kessel	dc935e2698	Added unit to adaptive layer height settings	2018-04-12 21:55:51 +02:00
Diego Prado Gesto	df521dcc93	Change description of a setting. ... Contributes to CURA-5222.	2018-04-12 14:56:42 +02:00
Ghostkeeper	13f63a7051	Rename 'No Skin' to 'Not in Skin' ... It's a bit more clear, as discussed in #3115. To actually change the functionality requires a bit more effort for which I'll need to make a ticket.	2018-04-12 14:39:46 +02:00
alekseisasin	7b9bf23786	Merge pull request #3411 from BagelOrb/support_retraction_setting ... setting to disable omitting retractions in support	2018-04-09 13:57:49 +02:00
Ghostkeeper	4ad9867591	Add setting to try multiple line thicknesses ... Engine implementation pending. This setting is intended for debugging problems with interrupted walls. It should probably not be published in a final release. Contributes to issue CURA-5189.	2018-04-03 16:38:19 +02:00
Jack Ha	9ea59c1976	CURA-4557 rename ratio percentage to percentage	2018-03-20 17:07:03 +01:00
THeijmans	5bdba905ff	Changed warning value prime tower purge ... Increased the value after tests show 1mm3+ primes don't lead to issues.	2018-03-20 16:07:38 +01:00
Jack Ha	d0609e97e4	CURA-4557 added material_shrinkage_ratio_percentage setting	2018-03-15 11:19:14 +01:00
Jack Ha	8dd065e3f5	Merge branch 'master' into extra_machine_settings	2018-03-15 09:36:30 +01:00
Mark Burton	4aa89068d7	Now, wall_min_flow and wall_min_flow_retract are hidden if overlap compensation is disabled.	2018-03-13 19:00:27 +00:00
Lipu Fei	5adb769cf8	Fix value function for extruders_enabled_count ... CIRA-5056	2018-03-13 16:48:44 +01:00
Mark Burton	88c2e37ce4	Added wall_min_flow and wall_min_flow_retract settings. ... Wall lines whose flow is < wall_min_flow are converted into travel moves.	2018-03-12 10:25:39 +00:00
Jack Ha	1f8be6ad3c	CURA-4400 moved default extruder value to value instead of default_value because of engine	2018-03-12 11:05:55 +01:00
Mark Burton	239961cc48	Merge remote-tracking branch 'upstream/master' into mb-retract-on-long-combs	2018-03-12 08:22:53 +00:00
Mark Burton	b732a84a6a	Added retraction_combing_max_distance setting. ... When this is non-zero, combing travel moves that are longer will use retraction.	2018-03-12 08:21:11 +00:00
Jack Ha	d70cc072e9	Merge branch 'master' into feature_enable_disable_extruder	2018-03-12 09:06:24 +01:00
Ian Paschal	c278942cec	CURA-67 Don't enable by default ... `value` is set to !support and !tree support, both of which are typically disabled by default, making this setting's default value effectively `true` even though the line above says the default should be `false`.	2018-03-09 10:26:48 +01:00
Jack Ha	3b8d470323	Merge branch 'master' into feature_enable_disable_extruder	2018-03-08 09:35:49 +01:00
Ian Paschal	a704f59034	Merge pull request #3175 from smartavionics/mb-add-bridge-settings ... Add bridge settings to experimental category.	2018-03-07 16:30:08 +01:00
Mark Burton	1ed5a00198	Added skin densities and layer 3 settings + tweaked various defaults.	2018-03-06 10:47:28 +00:00
Jack Ha	37d02da1f1	CURA-4400 restore correct default extruder, added extruders_enabled_count and use that in fdmprinters (result: i.e. one at a time can be enabled by disabling an extruder)	2018-03-05 14:01:39 +01:00
Mark Burton	4a498fd622	Tweak various bridge setting values & descriptions.	2018-03-04 21:56:44 +00:00
Mark Burton	754e85815a	Additional second bridge skin settings.	2018-03-04 09:00:41 +00:00
Mark Burton	323eac345a	Added bridge_modify_skins_above.	2018-03-03 12:04:58 +00:00
Mark Burton	5db636bf9b	Add bridge_wall_min_length setting. ... It's currently per extruder to make it easy to access within the engine but this should be changed when the settings are refactored.	2018-03-02 16:36:26 +00:00
Mark Burton	62169bed2a	Rename bridge_wall_max_air_gap to bridge_wall_max_overhang.	2018-03-02 16:35:21 +00:00
Jack Ha	53ec846436	CURA-4400 introduced value -1 for extruder number setting (not optional_extruder); this one takes the defaultExtruderPosition in MachineManager	2018-03-01 17:21:35 +01:00