1138 commits

Author	SHA1	Message	Date
Lipu Fei	98b72fb971	Merge branch '2.7'	2017-08-09 13:16:43 +02:00
Ghostkeeper	c0d96a1d79	Remove heat/cool speeds that are equal to default ... The default value for both of these settings in fdmprinter is 2.	2017-08-09 09:46:22 +02:00
Lipu Fei	7d3ad43c90	Merge pull request #2177 from Ultimaker/raft_smoothing ... JSOn feat: raft smoothing setting (CURA-3854)	2017-08-09 08:40:34 +02:00
Lipu Fei	63ea940680	Add minimum_value 0 for raft_smoothing ... CURA-3854	2017-08-09 08:39:10 +02:00
Lipu Fei	33bf758081	Merge pull request #2127 from ChrisRiddell/cr_fix_ironing_settings ... Keep Ironing settings together while in experimental	2017-08-08 16:54:37 +02:00
Lipu Fei	050caf49b2	Merge branch '2.7'	2017-08-08 16:44:58 +02:00
Lipu Fei	f75871567f	Merge branch 'master' into cr_fix_ironing_settings	2017-08-08 16:43:48 +02:00
Ghostkeeper	919bc6767c	Disable top surface line directions if there is no top surface	2017-08-08 11:40:19 +02:00
alekseisasin	c5cdf2e206	UM3 Initial layer speed is fixed 20 ... CURA-3377	2017-08-03 15:19:17 +02:00
alekseisasin	03c48ac39c	Addded other printer "Kemiq Q2 Gamma & Beta" and material quality ... CURA-4086	2017-08-03 15:05:45 +02:00
alekseisasin	543fda4656	Merge pull request #2136 from kemiq3d/master ... Add Kemiq Q2 Beta and Kemiq Q2 Gama definitions, mesh and qualities	2017-08-03 15:04:35 +02:00
alekseisasin	2a5ac4c4da	UM3 Initial layer speed is fixed 20 ... CURA-3377	2017-08-03 09:57:27 +02:00
Ghostkeeper	b43acf5b18	Revert "Revert "Revert "feat: Skin Reference wall settings (CURA-3990)""" ... This reverts commit 0d4604bb0c.	2017-08-02 11:02:14 +02:00
Ghostkeeper	6e97b5003d	Revert "Revert "Revert "better description skin reference wall settings (CURA-3990)""" ... This reverts commit f39fd47b6c.	2017-08-02 11:02:02 +02:00
Ghostkeeper	8b77465127	Revert "fix: set default of bottom reference wall to legacy behavior (CURA-3990 CURA-4103)" ... This reverts commit ce13e84bd0.	2017-08-02 11:00:26 +02:00
Tim Kuipers	ce13e84bd0	fix: set default of bottom reference wall to legacy behavior (CURA-3990 CURA-4103)	2017-08-01 13:53:31 +02:00
Tim Kuipers	f39fd47b6c	Revert "Revert "better description skin reference wall settings (CURA-3990)"" ... This reverts commit 8fc5b2dfee. This reimplements the Skin Reference Wall setting	2017-08-01 13:51:41 +02:00
Tim Kuipers	0d4604bb0c	Revert "Revert "feat: Skin Reference wall settings (CURA-3990)"" ... This reverts commit a3a0999df2. This reimplements Skin Reference Wall	2017-08-01 13:51:12 +02:00
Ghostkeeper	6993160ae5	Merge branch 'mb-group-walls' of https://github.com/smartavionics/Cura into smartavionics-mb-group-walls	2017-08-01 09:44:24 +02:00
Ghostkeeper	f298c29d5f	Disallow retraction/prime speeds of 0 ... This would cause divisions by 0.	2017-07-31 13:40:10 +02:00
Lipu Fei	a3a0999df2	Revert "feat: Skin Reference wall settings (CURA-3990)" ... This reverts commit 3af089cfa0.	2017-07-31 10:20:33 +02:00
Lipu Fei	8fc5b2dfee	Revert "better description skin reference wall settings (CURA-3990)" ... This reverts commit cbc3daf535.	2017-07-31 10:20:30 +02:00
Tim Kuipers	2ffeaadc46	JSOn feat: raft smoothing setting (CURA-3854)	2017-07-29 15:19:28 +02:00
Ghostkeeper	b714f0ff3e	Merge branch 'master' of github.com:Ultimaker/Cura	2017-07-28 10:48:21 +02:00
Mark Burton	b74e25cb14	Move optimize_wall_printing_order into the experimental category and change the default value to false.	2017-07-27 16:47:07 +01:00
Mark Burton	9fc39a19c9	Merge remote-tracking branch 'upstream/master' into mb-group-walls	2017-07-27 16:43:25 +01:00
Tim Kuipers	d052511be5	rename: Top Surface Infill ==> Top Surface Skin	2017-07-27 17:11:56 +02:00
Tim Kuipers	693cbd2f9f	fix: don't enable Roffing by default	2017-07-27 17:05:02 +02:00
Lipu Fei	ed525478d6	Merge remote-tracking branch 'upstream/skin_reference_wall'	2017-07-27 14:41:07 +02:00
Lipu Fei	85635b3b83	Reword: Roofing -> Top Surface Infill ... CURA-3940	2017-07-27 09:34:50 +02:00
Ghostkeeper	8a15d4432b	Merge branch 'remove_some_zags' ... Contributes to issue CURA-3957.	2017-07-26 17:23:27 +02:00
Lipu Fei	2aa8e590bf	Merge pull request #2056 from Ultimaker/top_most_skin_feature ... Top most skin feature (CURA-3940)	2017-07-26 14:58:08 +02:00
Lipu Fei	506a0a48f4	Reword: roofing -> top surface infill ... CURA-3940	2017-07-26 14:26:27 +02:00
Lipu Fei	a0e59dd6aa	Add settings for skipping some zags ... CURA-3957	2017-07-25 08:53:29 +02:00
Ghostkeeper	74feabacd0	Add warning value for initial layer line width ... 150% seems about right. Then you get a warning value for lines thicker than 0.525mm on a 0.4mm nozzle.	2017-07-24 16:19:59 +02:00
Ghostkeeper	06caedbed8	Update PVA profiles with gradual infill settings ... These profiles are optimised by hand.	2017-07-24 09:09:14 +02:00
Tim Kuipers	cbc3daf535	better description skin reference wall settings (CURA-3990)	2017-07-23 12:35:09 +02:00
Tim Kuipers	3af089cfa0	feat: Skin Reference wall settings (CURA-3990)	2017-07-23 12:34:58 +02:00
Tim Kuipers	2a758c85e7	Merge branch 'master' into top_most_skin_feature	2017-07-21 15:50:50 +02:00
Lipu Fei	d7f3553c90	Brim Line Count should take into account the initial layer line width factor ... CURA-4027	2017-07-21 14:39:45 +02:00
Ghostkeeper	4bb95eee36	Apply initial layer line width to skirt lines in prime tower position calculation	2017-07-21 12:56:37 +02:00
Ghostkeeper	66c97259c2	Make prime tower automatic formula the default for all FDM printers ... The Custom FDM Printer had wrong positions by default as well.	2017-07-21 12:56:37 +02:00
Tim Kuipers	d5be43d45d	roofing: inherit from topbottom (CURA-3940)	2017-07-20 15:42:04 +02:00
Tim Kuipers	d25e227707	Merge branch 'master' into top_most_skin_feature	2017-07-20 12:37:48 +02:00
kemiq3d	f3d288054c	Add Kemiq Q2 printer profiles, mesh and quality ... Add Kemiq Q2 Gama profile, mesh and quality	2017-07-20 11:55:16 +03:00
kemiq3d	beb1a7736c	Add files via upload	2017-07-20 11:50:08 +03:00
Ghostkeeper	500211941a	Fix spelling of 'Volumatric' ... Contributes to issue CURA-3998.	2017-07-18 13:10:16 +02:00
Tim Kuipers	83f6dec28d	rename roofing settings: topmost_skin => roofing (CURA-3940)	2017-07-17 15:51:36 +02:00
Tim Kuipers	141543d7ca	don't enable roofing by default (CURA-3940)	2017-07-17 15:32:57 +02:00
Tim Kuipers	26ac70d2bd	feat: topmost_skin_angles (CURA-3940)	2017-07-17 15:16:11 +02:00