Files added to :
- definitions
- extruders
- quality
- variant
setting_version has benn updated to "21"
XML file "product_to_id.json" has been updated because "STRATEO3D" is noww a brand of 2 machines : DUAL600 and IDEX420
IDEX420 is a "IDEX" machine, so we created 3 definition files : 1 main file "strateo3d_IDEX420" and 2 inherited files "strateo3d_IDEX420_duplicate" and "strateo3d_IDEX420_mirror"
materials PA6CF and PA6GF added to both machines in quality folders
Wireprinting wasn't actively maintained, and almost an entire different min-engine. It's also rarely used, and presumed broken. Remove it, so it doesn't have to be maintained or clog up other maintanance and/or refactor tasks.
frontend part of CURA-10394
Users could still set the option first, _then_ switch to Griffin, giving the same problems before the default was switched to false (since the setting is disabled for Griffin flavour anyway).
part of CURA-10451
Hold-stepper-motor (and maybe beep) options, newly introduced previously, _and on by default_ (even though it was clear they where not meant for Griffin flavour GCode -- because at least the hold-motor option was not even visible for Griffin) where causing UltiMaker printers with prints that had the pause-at-height script enabled to fail.
should fix internal ticket CURA-10451
most important change was changing
```
currentIndex: function () {
...
}
```
to
currentIndex: {
...
}
```
This changed the behavior so that the variables inside the code blocked are watched so that `currentIndex` is automatically updated. No longer needed to set the `currentIndex` from any where else anymore.
CURA-10374
I removed the period from the G-code to insert label for consistency. I also added a third option to this called "Skip layers". This allows you to insert gcode with a specific number of layers skipped (i.e. skip layers 1 will insert gcode every other layer, skip layers 3 will insert every fourth).
As an example, this change allowed me to insert a nozzle cleaning routine in my gcode without having to run it EVERY layer.
For non-Repetier and non-Ultimaker printers - Move the prime extrusion so it occurs while the print head is still in the parked position so the blob doesn't happen over the print (GitHub #13584 and #11471 for reference).
Add a user option to use M104 or M109 for the resume temperature to avoid an unnecessary delay if the resume temperature is the same as the standby temperature.
committed as part of CURA-9822
