alekseisasin
03c48ac39c
Addded other printer "Kemiq Q2 Gamma & Beta" and material quality
...
CURA-4086
2017-08-03 15:05:45 +02:00
alekseisasin
543fda4656
Merge pull request #2136 from kemiq3d/master
...
Add Kemiq Q2 Beta and Kemiq Q2 Gama definitions, mesh and qualities
2017-08-03 15:04:35 +02:00
alekseisasin
2a5ac4c4da
UM3 Initial layer speed is fixed 20
...
CURA-3377
2017-08-03 09:57:27 +02:00
Ghostkeeper
b43acf5b18
Revert "Revert "Revert "feat: Skin Reference wall settings (CURA-3990)"""
...
This reverts commit 0d4604bb0c
2017-08-02 11:02:14 +02:00
Ghostkeeper
6e97b5003d
Revert "Revert "Revert "better description skin reference wall settings (CURA-3990)"""
...
This reverts commit f39fd47b6c
2017-08-02 11:02:02 +02:00
Ghostkeeper
8b77465127
Revert "fix: set default of bottom reference wall to legacy behavior (CURA-3990 CURA-4103)"
...
This reverts commit ce13e84bd0
2017-08-02 11:00:26 +02:00
Tim Kuipers
ce13e84bd0
fix: set default of bottom reference wall to legacy behavior (CURA-3990 CURA-4103)
2017-08-01 13:53:31 +02:00
Tim Kuipers
f39fd47b6c
Revert "Revert "better description skin reference wall settings (CURA-3990)""
...
This reverts commit 8fc5b2dfee
2017-08-01 13:51:41 +02:00
Tim Kuipers
0d4604bb0c
Revert "Revert "feat: Skin Reference wall settings (CURA-3990)""
...
This reverts commit a3a0999df2
2017-08-01 13:51:12 +02:00
Ghostkeeper
6993160ae5
Merge branch 'mb-group-walls' of https://github.com/smartavionics/Cura into smartavionics-mb-group-walls
2017-08-01 09:44:24 +02:00
Ghostkeeper
f298c29d5f
Disallow retraction/prime speeds of 0
...
This would cause divisions by 0.
2017-07-31 13:40:10 +02:00
Lipu Fei
a3a0999df2
Revert "feat: Skin Reference wall settings (CURA-3990)"
...
This reverts commit 3af089cfa0
2017-07-31 10:20:33 +02:00
Lipu Fei
8fc5b2dfee
Revert "better description skin reference wall settings (CURA-3990)"
...
This reverts commit cbc3daf535
2017-07-31 10:20:30 +02:00
Ghostkeeper
b714f0ff3e
Merge branch 'master' of github.com:Ultimaker/Cura
2017-07-28 10:48:21 +02:00
Mark Burton
b74e25cb14
Move optimize_wall_printing_order into the experimental category and change the default value to false.
2017-07-27 16:47:07 +01:00
Mark Burton
9fc39a19c9
Merge remote-tracking branch 'upstream/master' into mb-group-walls
2017-07-27 16:43:25 +01:00
Tim Kuipers
d052511be5
rename: Top Surface Infill ==> Top Surface Skin
2017-07-27 17:11:56 +02:00
Tim Kuipers
693cbd2f9f
fix: don't enable Roffing by default
2017-07-27 17:05:02 +02:00
Lipu Fei
ed525478d6
Merge remote-tracking branch 'upstream/skin_reference_wall'
2017-07-27 14:41:07 +02:00
Lipu Fei
85635b3b83
Reword: Roofing -> Top Surface Infill
...
CURA-3940
2017-07-27 09:34:50 +02:00
Ghostkeeper
8a15d4432b
Merge branch 'remove_some_zags'
...
Contributes to issue CURA-3957.
2017-07-26 17:23:27 +02:00
Lipu Fei
2aa8e590bf
Merge pull request #2056 from Ultimaker/top_most_skin_feature
...
Top most skin feature (CURA-3940)
2017-07-26 14:58:08 +02:00
Lipu Fei
506a0a48f4
Reword: roofing -> top surface infill
...
CURA-3940
2017-07-26 14:26:27 +02:00
Lipu Fei
a0e59dd6aa
Add settings for skipping some zags
...
CURA-3957
2017-07-25 08:53:29 +02:00
Ghostkeeper
74feabacd0
Add warning value for initial layer line width
...
150% seems about right. Then you get a warning value for lines thicker than 0.525mm on a 0.4mm nozzle.
2017-07-24 16:19:59 +02:00
Ghostkeeper
06caedbed8
Update PVA profiles with gradual infill settings
...
These profiles are optimised by hand.
2017-07-24 09:09:14 +02:00
Tim Kuipers
cbc3daf535
better description skin reference wall settings (CURA-3990)
2017-07-23 12:35:09 +02:00
Tim Kuipers
3af089cfa0
feat: Skin Reference wall settings (CURA-3990)
2017-07-23 12:34:58 +02:00
Tim Kuipers
2a758c85e7
Merge branch 'master' into top_most_skin_feature
2017-07-21 15:50:50 +02:00
Lipu Fei
d7f3553c90
Brim Line Count should take into account the initial layer line width factor
...
CURA-4027
2017-07-21 14:39:45 +02:00
Ghostkeeper
4bb95eee36
Apply initial layer line width to skirt lines in prime tower position calculation
2017-07-21 12:56:37 +02:00
Ghostkeeper
66c97259c2
Make prime tower automatic formula the default for all FDM printers
...
The Custom FDM Printer had wrong positions by default as well.
2017-07-21 12:56:37 +02:00
Tim Kuipers
d5be43d45d
roofing: inherit from topbottom (CURA-3940)
2017-07-20 15:42:04 +02:00
Tim Kuipers
d25e227707
Merge branch 'master' into top_most_skin_feature
2017-07-20 12:37:48 +02:00
kemiq3d
f3d288054c
Add Kemiq Q2 printer profiles, mesh and quality
...
Add Kemiq Q2 Gama profile, mesh and quality
2017-07-20 11:55:16 +03:00
kemiq3d
beb1a7736c
Add files via upload
2017-07-20 11:50:08 +03:00
Ghostkeeper
500211941a
Fix spelling of 'Volumatric'
...
Contributes to issue CURA-3998.
2017-07-18 13:10:16 +02:00
Tim Kuipers
83f6dec28d
rename roofing settings: topmost_skin => roofing (CURA-3940)
2017-07-17 15:51:36 +02:00
Tim Kuipers
141543d7ca
don't enable roofing by default (CURA-3940)
2017-07-17 15:32:57 +02:00
Tim Kuipers
26ac70d2bd
feat: topmost_skin_angles (CURA-3940)
2017-07-17 15:16:11 +02:00
Tim Kuipers
9dcb2c918e
fix: disable topmost skin settings if there is no top skin (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
7b56ba41b1
fix: topmost_skin_extruder_nr enabled function (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
89cafc867e
cleanup: remove superfluous value equal to default_value (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
c91d11fde3
fix: make ironing inherit from topmost_skin rather than top_bottom (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
4754fd51ad
feat: topmost skin: Roofing settings (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
6fc824abd5
fix: make line width factor layer 0 an extruder setting (CURA-4027)
2017-07-17 14:46:00 +02:00
Ghostkeeper
7f1dfcf433
Move prime tower more left
...
Otherwise it intersects with one of the clips on some profiles.
2017-07-14 15:57:08 +02:00
Ghostkeeper
19d9f37bc5
Also subtract support horizontal expansion from prime tower Y position
...
*&@#
2017-07-14 13:43:05 +02:00
Ghostkeeper
8da2ae55cd
Improve prime tower position formula again
...
Basically the entire implementation of BuildVolume.py is in here by now... It's a bit more conservative than BuildVolume but I couldn't find a case where this fails (again).
2017-07-14 13:04:00 +02:00
Jaime van Kessel
dee09e15ae
Added 101hero platform, based on pull request from rmcolbert
...
CURA-4046
2017-07-14 12:59:39 +02:00
