Filip Goc
006e5bf585
small typographic fix
2016-11-14 12:10:48 -05:00
Filip Goc
8d3c0a7e73
Fixed mistake in end gcode script
...
The bed assembly was homing instead of going forward a little bit -
which makes the print more accessible when finished. Fixed.
2016-11-14 11:55:58 -05:00
Ghostkeeper
e9ced745fa
Undo compensation for nozzle offset on right clips
...
These clips were offset in the measurements because of the problem with the right nozzle not lifting high enough. This undoes that change.
Contributes to issue CURA-2625.
2016-11-14 17:00:09 +01:00
Ghostkeeper
17ade396d7
Move right two clips to head disallowed areas
...
It turns out that the right nozzle, if lifted, can still hit the clips in very rare cases. But the left nozzle, if the right nozzle is down, will not hit the clips. So the right clips are now part of the static areas just like the switching bay and camera, but the left clips are not.
Contributes to issue CURA-2625.
2016-11-14 16:36:47 +01:00
Tim Kuipers
e78c8c8d8b
setting: material_initial_print_temperature, material_final_print_temperature (CURA-1932)
2016-11-14 15:58:17 +01:00
Ghostkeeper
ef60181232
Change dimensions of Ultimaker 3 and reset nozzle origins
...
The left nozzle is at the origin again now. And the right nozzle is at an offset of 18mm of that.
Contributes to issue CURA-2625.
2016-11-14 15:51:40 +01:00
Tim Kuipers
16828d98d4
JSON spelling fix: draft ==> draught (CURA-759)
2016-11-14 12:50:49 +01:00
Tim Kuipers
337cd127dc
JSOn feat: adhesion_type none (CURA-759)
2016-11-14 12:02:33 +01:00
Tim Kuipers
1cc323eddd
changed machine name to Robo 3D R1
2016-11-14 11:37:54 +01:00
Tim Kuipers
ed1670caef
connected extruder trains to punchtec connect xl
2016-11-14 11:37:01 +01:00
Tim Kuipers
11f6494baf
capitalized Punchtech Connect XL
2016-11-14 11:35:37 +01:00
Tim Kuipers
52ab376616
removed duplicate Pruse i3
2016-11-14 11:34:49 +01:00
Ghostkeeper
0eb1044eaf
Merge branch 'add_jellybox_printer' of https://github.com/IMADE3D/Cura into IMADE3D-add_jellybox_printer
2016-11-14 10:48:55 +01:00
Tim Kuipers
6f3b8a7fa1
renamed ORD to RoVa3D
2016-11-14 10:30:59 +01:00
Filip Goc
b467f0a8d4
add JellyBOX machine definition file
...
gantry height left to default to effectively disable one at a time
printing for now
2016-11-13 11:33:49 -05:00
Ghostkeeper
ee9caa80a8
Remove dual-extrusion disallowed areas
...
The idea is that these are now computed through combining the disallowed areas of the two extruders (though that doesn't quite work yet).
Contributes to issue CURA-2625.
2016-11-11 17:15:09 +01:00
Ghostkeeper
066ccc4e51
Remove superfluous disabling of prime location settings
...
These are already disabled in the definitions of fdmprinter and fdmextruder. It doesn't need to be disabled again.
Contributes to issue CURA-2625.
2016-11-11 17:10:23 +01:00
Tim Kuipers
fb92e50262
JSON fix: fixed all start/end gcode references to settings and non-existent variables
2016-11-11 16:28:43 +01:00
Tim Kuipers
e40abb5d37
feat: cool_fan_speed_0 (CURA-2182)
2016-11-10 16:42:09 +01:00
Tim Kuipers
98bbeae055
lil: rounding error
2016-11-10 13:47:09 +01:00
Tim Kuipers
b86d8b4815
removed default setting
2016-11-10 13:47:09 +01:00
Tim Kuipers
967e5c5776
fix: makerbot output file format: x3g
2016-11-10 13:47:09 +01:00
Tim Kuipers
bba74328f1
fix: Deltabot manufacturer
2016-11-10 13:47:09 +01:00
Ghostkeeper
35d714efb3
Merge branch 'feature_retract_at_layer_change'
2016-11-09 13:38:30 +01:00
Ghostkeeper
59fb0bc739
Merge branch 'feature_extruder_temp_layer_0'
2016-11-08 14:46:15 +01:00
Tim Kuipers
3a69d91636
JSON refactor: move UltiGcode setting enabled dependency to fdmprinter (CURA-2781, CURA-2736)
2016-11-07 15:25:32 +01:00
Tim Kuipers
f014a87494
JSON fix: no standby temperature for single extrusion machines and UM2 family (CURA-2781, CURA-2736)
2016-11-07 15:18:43 +01:00
Tim Kuipers
71d015eeec
JSON fix: no initial layer temperature commands for the UM2 family (CURA-2781, CURA-2736)
2016-11-07 15:17:32 +01:00
Tim Kuipers
75f0452b1f
JSON fix: dont enable center_mesh by default (CURA-566)
2016-11-07 15:03:59 +01:00
Tim Kuipers
5490d9cce9
JSON fix: introduce command line settigns in machine json file (CURA-566)
2016-11-07 11:54:47 +01:00
Ghostkeeper
a4bf4b3502
Merge branch 'feature_wall_wipe'
2016-11-07 11:36:30 +01:00
Ghostkeeper
fe21dbb784
Merge remote-tracking branch 'origin/feature_extruder_temp_layer_0'
2016-11-04 16:56:24 +01:00
Jaime van Kessel
ed5244bcb0
Merge branch 'feature_concentric_3d_infill' of github.com:Ultimaker/Cura
2016-11-04 14:53:57 +01:00
Ghostkeeper
ccd0daee12
Set layer start position defaults
...
Originally this was only extruder_prime_pos_x and _y, but that setting is different per extruder. So now it computes the average prime position.
Contributes to issue CURA-1112.
2016-11-04 11:36:20 +01:00
Ghostkeeper
871a19091d
Merge branch 'feature_start_layer_far_away'
2016-11-04 10:52:38 +01:00
Tim Kuipers
1b853de981
Revert "JSON refactor: support_mesh ==> overhang_mesh (CURA-2077)"
...
This reverts commit d675ffe6e9765e5118b85585502aee7a1cb3283c.
2016-11-03 20:22:22 +01:00
Tim Kuipers
1787b1e65b
JSON refactor: support_mesh ==> overhang_mesh (CURA-2077)
2016-11-03 20:22:22 +01:00
Tim Kuipers
b840711960
JSON feat: support_mesh (CURA-2077)
2016-11-03 20:22:22 +01:00
Tim Kuipers
2c87cddd3c
JSON refactor: anti_support_mesh ==> anti_overhang_mesh (CURA-2077)
2016-11-03 20:22:22 +01:00
Tim Kuipers
09a64c7ba0
JSON feat: anti support meshes (CURA-2077)
2016-11-03 20:22:22 +01:00
Tim Kuipers
c430980536
JSON feat: wall_0_wipe_dist (CURA-1698)
2016-11-03 20:15:24 +01:00
Ghostkeeper
0f374a2e23
Merge branch 'feature_infill_support'
2016-11-03 13:37:26 +01:00
Ghostkeeper
612ef1c0c6
Fix spelling and grammar of Remove Mesh Intersection
...
'objecs' to 'objects'.
Removed superfluous 'is'.
Contributes to issue CURA-2712.
2016-11-02 14:54:19 +01:00
Ghostkeeper
24f78a7ee6
Capitalise setting name for Hollow Objects
...
This is in line with other setting names.
Contributes to issue CURA-2748.
2016-11-01 16:31:42 +01:00
Ghostkeeper
6fa36f7c09
Merge branch '2.3'
2016-11-01 16:07:18 +01:00
Ghostkeeper
073c219233
Use spaces instead of tabs
...
As per our code standards.
2016-11-01 12:50:06 +01:00
Tim Kuipers
bce6a6fed4
refactor: move infill_hollow to experimental category (CURA-2748)
2016-11-01 11:06:56 +01:00
Tim Kuipers
06d2f01075
Merge branch 'master' into feature_infill_support
2016-11-01 11:04:05 +01:00
Ghostkeeper
0db7cf2453
Revert 'Added a comment' and 'Set horizontal expansion'
...
This horizontal expansion messes prints with very thin parts. It was probably the wrong solution for the problem. We'll revert the change until we hear more from tests at the materials team.
Contributes to issue CURA-2845.
2016-11-01 10:28:09 +01:00
Simon Edwards
1fbd179aaa
Merge branch '2.3'
2016-10-31 13:30:20 +01:00
