3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2025-07-20 05:07:50 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2
32175 commits 306 branches 270 tags 779 MiB
Commit graph

4264 commits

Author SHA1 Message Date
Brad
18020338ea
Fixed linter error 2023-02-04 20:41:23 +03:00
Brad
e93dd8857d
Rename longer_lk4_x.def.json to longer_lk4x.def.json 2023-02-04 20:31:51 +03:00
Brad
e2e7006ee7
Addition of Longer3D LK4 X 
Vendor provided this information as a custom file for Cura 4; I have taken that input and adjusted to suit Cura 5
 2023-02-04 20:30:03 +03:00
Rijk van Manen
06c46c8eae allow bridge speeds to be lower then cool_min_speed 
With PP-71 the cool_min_speed is increased to a high values in case the lift_head is enabled. This causes the bridge_speeds to be lower then the cool_min_speed. Which is no problem, so the limit can be removed.
PP-71 / CURA-10211

(cherry picked from commit 6d0be01913)
 2023-02-03 10:54:32 +01:00
jspijker
64112b4158 Merge branch 'main' into PP-71_allow-bridge-speeds-to-be-lower-then-cool_min_speed 2023-02-03 10:52:30 +01:00
Joeydelarago
63108dd9f6 Applied printer-linter format 2023-02-02 15:56:31 +00:00
Joey de l'Arago
5cc126c4da
Merge pull request #14269 from GUTENBERG3DP/main 
Add profile for Gutenberg G-Zero
 2023-02-02 16:55:26 +01:00
Joey de l'Arago
449acfbf19 Update fdmprinter setting descriptions. 
These are sorted first by file location and then by mdgid so they jumped around a little bit.
 2023-02-02 16:10:52 +01:00
Rijk van Manen
f66395bbd1 add value limits 
Slicing becomes very slow for large interlocking_boundary_avoidance and interlocking_depth values. The minimum interlocking_beam_width is the minimum wall line width. And the interlocking_rotation should be between 0 and 360 degrees.
PP-283
 2023-02-02 13:48:50 +01:00
Rijk van Manen
5b2fb0c0d9 reduce the interlocking_boundary_avoidance 
The interlocking_boundary_avoidance was a bit larger originally to prevent interlocking structures outside the model for edge cases. But this behaviour is improved a lot, so the boundary avoidance can be reduced, which helps for thin and small structures.
PP-283
 2023-02-02 11:10:22 +01:00
Rijk van Manen
f1cc551309 add value limits 
Slicing becomes very slow for large interlocking_boundary_avoidance and interlocking_depth values. The minimum interlocking_beam_width is the minimum wall line width. And the interlocking_rotation should be between 0 and 360 degrees.
PP-283
 2023-02-02 11:08:21 +01:00
Rijk van Manen
6d0be01913 allow bridge speeds to be lower then cool_min_speed 
With PP-71 the cool_min_speed is increased to a high values in case the lift_head is enabled. This causes the bridge_speeds to be lower then the cool_min_speed. Which is no problem, so the limit can be removed.
PP-71 / CURA-10211
 2023-01-31 14:18:52 +01:00
jspijker
2d18482782 Bump up the settings version to 21 
Contributes to CURA-10077
 2023-01-30 11:39:13 +01:00
jspijker
871017da73 Remove old settings from resource files 
Contributes to CURA-10077
 2023-01-27 17:13:06 +01:00
rijkvanmanen
7e72a4ee7e Applied printer-linter format 2023-01-26 18:12:32 +00:00
Rijk van Manen
36d5e75ed0 make S7 public 
PP-312
 2023-01-26 19:11:16 +01:00
Rijk van Manen
bd55f5ecf4 Add new setting for the narrow skin region width 
Small Top/Bottom regions are filled with walls instead of the normal Top/Bottom pattern. This helps to avoids jerky motions.
CURA-10201
 2023-01-26 11:20:28 +01:00
Rijk van Manen
129f7f7d12 round the speeds to avoid ugly numbers 
PP-71
 2023-01-24 14:34:44 +01:00
Rijk van Manen
1c2ba2fcd4 fix typo 
PP-71
 2023-01-24 11:59:35 +01:00
Rijk van Manen
0d1f73b090 fix typo 
PP-71
 2023-01-24 11:47:35 +01:00
rijkvanmanen
0648cc5fd6 Applied printer-linter format 2023-01-24 10:33:14 +00:00
Rijk van Manen
5aa7dcf62a align cool_min_temperature and material_final_printing_temperature 
Both the material_final_printing_temperature and the cool_min_temperature are 15deg lower as the printing temperature. Except for TPU and PP.
PP-71
 2023-01-24 11:31:39 +01:00
Rijk van Manen
9171aa9168 follow the default settings 
PP-71
 2023-01-24 11:08:16 +01:00
Rijk van Manen
a66ec97478 apply the new default settings to all ultimaker printers 
With the introduction of cool_min_temperature it is way easier to generalize the minimum layer time settings. To make sure all ultimaker printers benefit from this improvements the settings are applied to ultimaker.def.json.
PP-71
 2023-01-24 11:01:39 +01:00
Rijk van Manen
3035583de9 disable minimum layer time settings if minimum layer time is zero 
These settings don't have a meaning when the minimum layer time is zero.
PP-71
 2023-01-24 10:59:59 +01:00
Casper Lamboo
058c5476c4
Merge pull request #14364 from Ultimaker/PP-303-increase-support-reliability 
increase support reliability
 2023-01-23 16:24:07 +01:00
Joey de l'Arago
6bd7e73aa1 disable all fuzzy settings when interlocking enabled 
CURA-10047
 2023-01-23 16:05:36 +01:00
Rijk van Manen
faf7e3b227 increase support reliability 
The minimum support area is decreased to avoid disconnected support. The support horizontal expansion is increased to allow for more stable support structures. These improvements are possible because of the improvements made in CURA-10152.
PP-303
 2023-01-23 14:57:44 +01:00
Joey de l'Arago
cc9053091d Disable fuzzy skin when using interlocking. Using these settings together causes the interlocking structure walls to be fuzzy (These are inside model) 
CURA-10047
 2023-01-20 16:00:52 +01:00
Joey de l'Arago
3820fd7bc6
Merge pull request #14333 from Ultimaker/Interlocking_To_Experimental_CURA-10168 
Move_Intelrocking_To_Experimental_CURA-10168
 2023-01-20 15:09:20 +01:00
c.lamboo
2638341ec4 Also remove interlocking the "Dual Extruder" category 
contributes to CURA-10168
 2023-01-20 12:58:19 +01:00
Joeydelarago
f9dcfb2268 Applied printer-linter format 2023-01-20 09:04:27 +00:00
sparkym3
a6e89a9d54 Make Creality Ender 3 S1 consistent 2023-01-19 11:49:41 -06:00
Vandresc
82ed62941d Move_Intelrocking_To_Experimental_CURA-10168 
Moving Interlocking to Experimental category.
 2023-01-17 11:19:09 +01:00
mehmetsutas
18a5059bf6 Applied printer-linter format 2023-01-14 20:06:57 +00:00
Mehmet Sutaş
1fa2eb9565 Update rigid3d_zero3.def.json 2023-01-14 23:05:46 +03:00
Mehmet Sutaş
8b1ab32796 Rigid3D Definitions Update 2023-01-14 21:42:28 +03:00
Mehmet Sutaş
a5bc618cf0 Merge branch 'main' of https://github.com/mehmetsutas/Cura 2023-01-14 02:52:21 +03:00
Joeydelarago
15c1ade87d Applied printer-linter format 2023-01-11 14:07:22 +00:00
Joey de l'Arago
0be12f7764
Merge pull request #14177 from RagingRoosevelt/main 
Add Voron Trident profiles, bed meshes, variants
 2023-01-11 15:06:13 +01:00
Joeydelarago
6b463971b7 Applied printer-linter format 2023-01-11 12:43:14 +00:00
Joey de l'Arago
41c5f62c0a
Merge pull request #14083 from razzeee/add-anycubic-kobra-go 
Add anycubic kobra go
 2023-01-11 13:42:13 +01:00
Jelle Spijker
358efa94b4
Merge pull request #14060 from Ultimaker/PP-286_make-buildplate-adhesion-extruder-optional_extruder 
PP-286_make-buildplate-adhesion-extruder-optional_extruder
 2023-01-11 12:51:54 +01:00
Jelle Spijker
4b8cae754c
Merge pull request #14061 from Ultimaker/PP-282_update-seam-corner-preference 
PP-282_update-seam-corner-preference
 2023-01-11 12:47:57 +01:00
ChipCE
e1f188a25e Add profile for Gutenberg G-Zero 
By : Nguyen (minhtu.nguyen@gutenberg.co.jp)
 2023-01-11 16:28:32 +09:00
casperlamboo
1c0c85a3e0 Applied printer-linter format 2023-01-10 15:38:39 +00:00
Casper Lamboo
f601e9a9f6
Merge pull request #14231 from NARUTOfzr/main 
Add Elegoo Neptune series Printer Configuration.
 2023-01-10 16:37:27 +01:00
jellespijker
99d47fe772 Applied printer-linter format 2023-01-10 08:17:39 +00:00
dengdaitianhei
89248651e9
Flsun V400 (#12796) 
Adds the Flsun V400

Implements CURA-9783
 2023-01-10 09:16:32 +01:00
jellespijker
a43b51a736 Applied printer-linter format 2023-01-10 08:03:39 +00:00