* Adding Eryone Thinker profile to Cura
- adding printer definition
- adding extruder definition
- adding image plate
- adding platform object
- adding quality profiles
* Minor update eryone_thinker.def.json
Fix initial fan speed
* Improve model textures and draw order
Fixed draw order of model by seperating the mesh into parts and ordering them before export. Add more colors to the texture to allow for more distictant parts.
* Reduced mesh size by remodeling the bed height adjustment wheels.
* Updated Eryone Thinker name to include Series in the name
* Update eryone_thinker.def.json
* Improve End GCode
Ensure we disable bed temp and turn off all fans.
Move the nozzle up by 0.5mm and retract to remove wipe on model top layer.
* Minor fixes to start and end gcode
* Eryone Thinker Profile improvements.
Adding Extra Fast profile.
Added acceleration speed for Fast.
Minor updates to definition for default material to be Eryone PLA and some other setting to work better with profiles.
* Delete eryone_thinker.def.json
* Create eryone_thinker.def.json
* Updating Eryone Thinker Definition
Added changes again due to for reconcile stomping the original
* Update eryone_thinker_fast.inst.cfg
Update the layer height of profile_fast to 0.25mm
* Update eryone_thinker_fast.inst.cfg
Update the layer_height to 0.25mm
* Improving the Eryone Thinker setup
Set Definition to use Monotonic skin by default
Add Fine profile at 0.1 layer height
Change High to 0.15 layer height and number of layers to match
Change Fast to 0.25 layer height and number of layers to match
* Eryone Thinker Profile update, resolving merge
* Eryone Thinker Profile Definition & Quality Clean up
Move all the Normal settings into the core definitions
Move share setting into definition to reduce redundant values for quality profiles
Remove values from definition that match the default fdmprinter definition for easier maintence.
Change definition to only support Monotonic order on top Roof layer.
* Fixing missing [values] from normal profile
* Delete eryone_thinker_extra_fast.inst.cfg
Conflict fix
* Update eryone_thinker_fine.inst.cfg
Fix the setting version incorrectly.
* Eryone Thinker Definition Bug fix for Layer Height 0
Fixing issue when layer_height_0 value was not being resolved correctly in Cura.
* Disable the first layer cooling fan speed
* Update eryone_er20.def.json
* Add the profile
Recovery eryone_thinker_fast.inst.cfg
* Update er20 start gcode and end gcode
1. Update er20 start gcode and end gcode
2. Update nozzle offset
Co-authored-by: Demetrius Apostolopoulos <75643490+dapostol73@users.noreply.github.com>
And an example of such usage: In the material sync via cloud we only want to sync with printers that can receive those materials.
We might want to add a message for the user to also make sure the firmware is up to date. Because if the firmware is not up to date now it will show no printers and instruct the user how to connect the printer to the cloud.
Contributes to issue CURA-8671.
We changed tree support to have a correct top distance now. If you ask for 0 top distance, you get 0 top distance. If you ask for 0.2mm top distance, you get 0.2mm top distance (rounded to layers). Previously the top distance was too high. Yet it seems that people were happy with how easily Tree Support was removed from the print. So this is a best-effort attempt to keep the final result similar to what it was originally.
It won't work for everything, I fear. But it's about as good as we can make it.
Contributes to issue CURA-7624.
The engine would reserve space for each outline that should be there according to the count, not for each wall that was actually printed. Values of 999999 where chosen after discussion for _some_ of these (but not anything to do wit hskirt-brim, since we use those in the frontend for dissalowed areas) becasue then you can just fill a number of nines to get a completely 'walled' model printed.
We removed the limit of density for the first bridging layer, but there are more settings for that, and there's a similar arbitrary limit for flow in place.
Contributes to issue CURA-8639 and #10736.
In the fdmprinter definition the 'infill' is created by 999999 bottom layers to change to infill pattern to lines. This hack is reverted for ultimaker printers. More info: PP-25
There is no theoretical or algorithmic limit here. We may warn the user, but not prevent them from changing it.
Done as a five minute fix. Fixes CURA-8693. Fixes#10736.
It doesn't work for those patterns at the moment. For Gyroid it could be made to work. For Cross and Cross 3D it's a bit more difficult due to the pre-calculations and density image done for those.
Contributes to issue PP-55. Done as a 5 minute fix.
These two have garnered some feedback in that it's wholly unclear what the sentences even mean. Hopefully this correction makes it more clear for next time.
Contributes to issue CURA-8638.
Two changes have been made:
- Use more consistent terminology for the top side of the model (which could be skin or walls). This is corrected from feedback by our translators.
- Don't add disclaimers about the infill density to this already way-too-long setting description. If anything, a disclaimer should be added to the infill density description that Gradual Infill and some infill patterns might not reach the desired density everywhere. But really, I think it's more in the domain of user documentation like the Ultimaker website or the Settings Guide.
Yes, it's my name. I'm okay with people learning that if they are really looking. I'm less okay with search engines learning that. Removing my name here linked to my nickname will eventually cause search engines to unlink it too.
This needs quotes, since it's a Python expression. Otherwise it would get interpreted as a variable name which doesn't exist.
Contributes to issue CURA-8627.
Otherwise the maximum gets ignored because the JSON results in a dict where the keys are unique. So the second one happens to get skipped then.
Contributes to issue CURA-8627.
This is interpreted as a Python function, so if it doesn't have those quotes it'll be interpreted as a variable name, and that variable doesn't exist.
Contributes to issue CURA-8627.
- "Minimum_value" changed to "minimum_warning_value"
- PVA (BB0.4 and BB0.8) require low support jerk settings for good adhesion
- Support roof does follow print_jer and no warning levels set
* test
test
* Delete 느낌표 2개.png
* Cremaker's def file
Cremaker's 3 model def files added.
* Cremaker's ext def file
Cremaker's extruder def files added.
* cremaker bed obj file
2 model size add
* change value
change to value from default value
* change value
change to value from default value
* change machine value
change to "cremaker_common" from "cremaker"
* change value
change to value from default value
* change value
change to value from default value
* change value
change to value from default value
* Update cremaker_common.def.json
* change some code for crashes to resolve
