3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2025-12-05 16:51:12 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 2
4193 commits 344 branches 300 tags 764 MiB
Commit graph

1860 commits

Author SHA1 Message Date
fieldOfView
6075536497 Fix settingtextfield validator in PerObjectSettings 
CURA-2115
 2016-08-11 14:37:58 +02:00
fieldOfView
71a9f2dd7a Clean up conversion to string 
CURA-2071
 2016-08-11 11:53:55 +02:00
Ghostkeeper
8c231e2942
Allow higher speeds for diagonal wireframe moves 
Since these moves are slightly diagonal in all directions, a higher speed can be achieved. Exactly how high depends on both angles, but for simplification this limit is a bit too broad, allowing speeds that the printer can't handle. The firmware should catch that case if it happens.

Contributes to issue CURA-1049.
 2016-08-11 10:54:00 +02:00
Ghostkeeper
4e13c262cf
Re-add max warning value for speed_slowdown_layers 
It warns if the slowdown layers span more than 1mm.

Contributes to issue CURA-1049.
 2016-08-11 10:53:59 +02:00
fieldOfView
957f60eb11 Add first draft of an UMO with Dual Extrusion Kit definition 
CURA-1774
 2016-08-10 18:04:30 +02:00
Tim Kuipers
63f5889eae JSON fix type (CURA-1049) 2016-08-10 17:06:51 +02:00
fieldOfView
ff025a753f Change placeholder material colors 
CURA-2070
 2016-08-10 14:56:13 +02:00
fieldOfView
b6bf02e0a0 Update swatch colors when changing materials 
CURA-1971
 2016-08-10 14:37:59 +02:00
Ghostkeeper
15fef2452b
Limit speeds to max feedrates of the printer 
Also number of slowdown layers is no longer limited by light speed.

Contributes to issue CURA-1049.
 2016-08-10 13:52:28 +02:00
Jack Ha
decf998d68 Code style, semicolons 2016-08-10 09:17:10 +02:00
fieldOfView
e551898e04 Add a connection string to the printmonitor 
CURA-2091
 2016-08-09 18:43:09 +02:00
Jaime van Kessel
967591bccb Infill pattern is now viewed from right stack again 
CURA-2072
 2016-08-09 17:20:37 +02:00
Jaime van Kessel
433db40e9c Merge branch 'master' of github.com:Ultimaker/Cura 2016-08-09 17:11:23 +02:00
Jaime van Kessel
c381b82ac1 Extruder nr is now sent as string 
CURA-2071
 2016-08-09 17:09:48 +02:00
Jack Ha
223b8f28bb Update print monitor button labels and enabled. CURA-2060 2016-08-09 16:20:40 +02:00
Jack Ha
2d723cbb57 Comments CURA-2064 2016-08-09 14:54:09 +02:00
Jack Ha
fc462cdf6f Merge branch 'master' of github.com:Ultimaker/Cura 2016-08-09 10:57:42 +02:00
Jack Ha
f60ba6ddf0 Enable Abort Print button while in pre_print. 2016-08-09 10:57:28 +02:00
fieldOfView
c7a120edd5 Merge branch 'master' of https://github.com/Ultimaker/Cura 2016-08-09 09:56:40 +02:00
fieldOfView
f817d30abc Change colour to color for consistency 2016-08-09 09:56:23 +02:00
Tim Kuipers
68798a0c81 Merge branch 'master' of github.com:Ultimaker/Cura 2016-08-08 17:13:44 +02:00
Jack Ha
6d52319ee4 Adjusted visibility of printer monitor progress bar + percentage. 
CURA-2064
 2016-08-08 17:08:01 +02:00
Tim Kuipers
6477e588da JSON feat: override max z feedrate (CURA-1049) 2016-08-08 17:02:49 +02:00
Jack Ha
b365cdfd0f Merge branch 'master' of github.com:Ultimaker/Cura 2016-08-08 16:26:20 +02:00
Jack Ha
1bd0d65e0a Added user feedback after pressing Pause / Resume in network printer. 
The button displays Pausing... or Resuming... until a new status update.

CURA-2060
 2016-08-08 16:25:01 +02:00
fieldOfView
20d2cd56a0 Merge branch 'master' of https://github.com/Ultimaker/Cura 2016-08-08 15:41:33 +02:00
fieldOfView
2c61fe3249 Tweak layout of Per Object Settings 
CURA-1799
 2016-08-08 15:41:20 +02:00
Tim Kuipers
ca8ded6c35 JSON fix: support z dist defaults to 1 layer instead of 2 (CURA-1283) 2016-08-08 13:23:03 +02:00
Ghostkeeper
d98c122bd5
Disable extruder selection drop-downs in single-extrusion machines 
They don't function in single-extrusion machines.
 2016-08-08 12:56:45 +02:00
fieldOfView
dff90342d2 Improve rendering of notice icon at small sizes 
CURA-2048
 2016-08-08 12:00:56 +02:00
Tim Kuipers
c57f13b3d3 JSON fix: turn off flow equalization by default (CURA-2065) 2016-08-08 10:13:14 +02:00
Tim Kuipers
4f3b6e254e Merge branch 'mergeinfillchanges' of https://github.com/markwal/Cura into markwal-mergeinfillchanges 2016-08-08 09:37:49 +02:00
fieldOfView
78848567e0 Add printer when pressing enter in Add Printer page instead of closing page 
CURA-1354
 2016-08-05 16:04:51 +02:00
fieldOfView
fa0d8f912f Don't show UMO upgrades page for UMO+ 2016-08-05 16:02:10 +02:00
fieldOfView
2edda68021 Improve validator for numeric fields 
Do not accept fractional input for "int" settings
Also only accept a "-" as the first character
 2016-08-05 15:12:13 +02:00
Ghostkeeper
09801db5f8
Fix support interface density and pattern global inherits stack 
These depend on values that are obtained through global_inherits_stack, so they must also have global_inherits_stack.

Contributes to issue CURA-2024.
 2016-08-05 13:48:04 +02:00
Mark Walker
a485b58051 Move equalize_flow settings ahead of acceleration 
And add "the print speed" to the description
 2016-08-04 12:18:53 -07:00
Mark Walker
1e62b43d53 Rename pressure to flow 2016-08-04 10:54:04 -07:00
Mark Walker
eddbc87ceb New settings to allow control over automatic speed 
changes when MergeInfillLines adjusts speed for even pressure when
changing extrusion widths.
 2016-08-04 10:34:53 -07:00
fieldOfView
6cf8536404 Rename pause button to pause/resume button for clarity 
CURA-1851
 2016-08-04 18:22:35 +02:00
Ghostkeeper
93f6f5d8d3
Don't use extruderValue on settings that have no global_inherits_stack 
It's unnecessary and seems to break things.

Contributes to issue CURA-2024.
 2016-08-04 16:54:43 +02:00
fieldOfView
cf06df8b07 Add a sidebar state for when a printer is not accepting commands 
CURA-1851
 2016-08-04 16:39:46 +02:00
fieldOfView
5f3c051ec6 Code cleanup 
CURA-1990
 2016-08-04 16:02:05 +02:00
fieldOfView
ed669925ad Disable print monitor if the printer is not (yet) ready to receive commands 
CURA-1851
 2016-08-04 15:06:22 +02:00
Ghostkeeper
f3a119f9bb
Use correct extruder's value when inheriting global_inheritance_stack settings 
This uses the new function extruderValue() which picks the value from a different extruder. Every setting that has the global_inheritance_stack property is now referenced via the extruderValue() setting in all functions.

Contributes to issue CURA-2024.
 2016-08-04 13:35:13 +02:00
fieldOfView
de3edffe3e Merge branch 'master' of https://github.com/Ultimaker/Cura 2016-08-04 13:25:41 +02:00
fieldOfView
a74d5dd8cb Show error text in print monitor 
CURA-1990
 2016-08-04 13:25:28 +02:00
Ghostkeeper
b89a9a8113
Allow freezing temperatures 
But not on Ultimaker printers, because they crash.
 2016-08-04 12:50:03 +02:00
fieldOfView
aba027373b Merge branch 'master' of https://github.com/Ultimaker/Cura 2016-08-03 22:15:17 +02:00
fieldOfView
16e9c1b2bd Tweak general preference page spacing 2016-08-03 22:14:39 +02:00