If this is set to an absolute value, the material settings wont have any effect anymore.
A much better way is to just set the default temperature, which is what the intent is
Modify the Ender 6 profile to the minimun, to fit other creality printers. all additional configuration removed.
Print quality is better with default Creality firmware and this simpler definition.
Spiralize is meant for models which are solid, but many people don't know and model their things hollow.
With this automatic setting change these people won't notice that they have modeled it wrong.
Which means there are less times I need to explain stuff to users.
Profit.
Added nozzle size
Dynamic wall thickness by nozzle diameter
Added filament costs to standard
First layer speed inheritance
Added maximum temp warnings
Updated FAN
Optimized initial purge of filament
It's a little bit unclear, but the initial reason we set this to false was because we wanted to make sure most of the 'metal print' releated features dropped in 5.1, not 5.0?
still CURA-8097 .. sort of
Overwhelmingly in our community it seems that the overhang and seam quality is better when printing inside-out.
Ultimaker found that the quality is better (in particular the dimensional accuracy) when printing outside-in. So let them have it outside-in and the rest inside-out.
Made after experimental evidence on Reddit (and in the past on Github).
Setting this value smaller could cause scarring when the nozzle offset calibration is not performed. A higher value causes a too big gap between the model and support, resulting in support not being attached to the model on sloped surfaces. PP-185
A bigger horizontal expansion is improving the stability of the support structure. Setting the Support Horizontal Expansion > Support X/Y distance causes the support folding around the object, making it way harder to remove and introducing a lot of additional stringing. PP-185
That way, an extruder profile can say that they want this.
If any extruder needs this setting enabled, it will be enabled for the whole print.
Done as a 5 minute fix.
A bigger horizontal expansion is improving the stability of the support structure. Setting the Support Horizontal Expansion > Support X/Y distance causes the support folding around the object, making it way harder to remove and introducing a lot of additional stringing. PP-185
Setting this value smaller could cause scarring when the nozzle offset calibration is not performed. A higher value causes a too big gap between the model and support, resulting in support not being attached to the model on sloped surfaces. PP-185
