Lipu Fei
4f2c76e462
Update a profile when deserializing it
...
CURA-3540
2017-04-14 10:50:42 +02:00
Ghostkeeper
cb8796711d
Merge branch '2.5'
2017-04-13 18:21:35 +02:00
Ghostkeeper
e49316d1b9
Set nozzle switch prime speed in AA 0.8mm profiles to 20
...
Some of them ended up as 15 because that's the default in the Ultimaker 3. This was done correctly by the profile optimiser because this setting was not specified by the original profiles, but it should've been 20 for all AA 0.8mm profiles.
Contributes to issue CURA-3650.
2017-04-13 18:21:17 +02:00
Jaime van Kessel
12ec7a5bc9
Merge branch 'master' of github.com:Ultimaker/Cura
2017-04-13 16:36:17 +02:00
Jaime van Kessel
437c78711d
Added typing to all singletons
...
This greatly helps with pycharms ability to do auto code completion
2017-04-13 16:32:17 +02:00
Ghostkeeper
b0a1e909c9
Merge branch '2.5'
2017-04-13 16:10:10 +02:00
Ghostkeeper
ba64573fa0
Use support interface density instead of line distance
...
This way the user can still override the line distance if necessary.
Contributes to issue CURA-3650.
2017-04-13 16:09:51 +02:00
Ghostkeeper
ba46a90f92
Merge branch '2.5'
2017-04-13 15:02:29 +02:00
Ghostkeeper
9b2bd36fdf
Update Russian translations again
...
Previous time I accidentally committed this to master instead of 2.5. This was then cherry-picked to 2.5 by a colleague but that went wrong in all sorts of ways. So I'm doing this again but then properly.
Contributes to issue CURA-3487.
2017-04-13 14:51:42 +02:00
Mark
c0f35a620a
Use the correct i18n catalog name for translations in the right-click menu
...
CURA-3660
2017-04-13 13:52:11 +02:00
Jaime van Kessel
705158d1f8
Merge branch 'master' of github.com:Ultimaker/Cura
2017-04-13 11:29:25 +02:00
Jaime van Kessel
740b5ebc80
Removed print statements from unit test
2017-04-13 11:29:09 +02:00
Jaime van Kessel
a02eacd8bc
Fixed unit test
2017-04-13 11:28:19 +02:00
Tim Kuipers
ef9b705cc4
Merge remote-tracking branch 'origin/feature_support_mesh'
2017-04-13 11:13:25 +02:00
Jaime van Kessel
a075b567b9
Merge branch 'master' of git://github.com/CRojasV/Cura
2017-04-13 09:51:39 +02:00
Ghostkeeper
fe8b7319f0
Merge branch 'master' of github.com:Ultimaker/Cura
2017-04-13 09:50:53 +02:00
Ghostkeeper
f35124400b
Merge branch '2.5'
2017-04-13 09:50:27 +02:00
Ghostkeeper
cf25eeea5f
Remove Japanese and Korean translations
...
They are not complete (by far).
Contributes to issue CURA-3487.
2017-04-13 09:39:10 +02:00
Ghostkeeper
96347d493a
Merge branch '2.5' of https://github.com/Patola/Cura into Patola-2.5
2017-04-13 09:20:05 +02:00
Ghostkeeper
907d064684
Copy 0.8mm variants of UM3 to UM3E
...
They share the same profiles. They should also have the same settings in the variants, but this is not automatically shared for some reason.
Contributes to issue CURA-3650.
2017-04-13 09:05:56 +02:00
CRojasV
a52a94eb97
Add new type of platform
...
This version has a well scaled platform, tested.
2017-04-12 11:12:45 -05:00
CRojasV
81dffc442a
Delete this file to add a better version
...
We delete this file because the model is not properly scaled
2017-04-12 11:11:48 -05:00
CRojasV
3e19261fa8
New version files
...
This time it have the platform position configuration, and it have version number error fixed.
2017-04-12 11:10:22 -05:00
CRojasV
d71e964be7
Deleted to Fix platform position
...
This file was deleted because it don't have the correct platform position setup
2017-04-12 11:08:24 -05:00
CRojasV
0a58214d74
Delete File, to add a fixed one
...
This file was delete because it don´t have the current location of the platform
2017-04-12 11:06:39 -05:00
Cláudio (Patola) Sampaio
3edff39705
Updated translations for Cura 2.5
2017-04-12 13:04:35 -03:00
Jaime van Kessel
e0b927b53c
Merge branch 'master' of github.com:Ultimaker/Cura
2017-04-12 17:40:26 +02:00
Jaime van Kessel
558b446b4a
Fixed UMO g-code files not being loadable
...
The processGcode did not take gcode + comments in the same line into account
CURA-3677
2017-04-12 17:32:47 +02:00
Ghostkeeper
6d266d2da6
Merge branch '2.5'
2017-04-12 17:32:40 +02:00
Ghostkeeper
cc2d0d3cfe
Add 0.8mm TPU profiles
...
They have already been optimised together with ABS, CPE, PLA, Nylon and PVA.
Contributes to issue CURA-3650.
2017-04-12 17:32:26 +02:00
Ghostkeeper
35fd58f721
Optimise 0.4mm profiles for CPEP, PC and TPU
...
These optimisations should only remove settings that are exactly equal to the parent profile. Support interface settings are an exception, since they were defining non-existing settings in the original profiles. The stand-by temperature is also an exception, since the stand-by temperature of the material profile is set in stone because of firmware.
Contributes to issue CURA-3650.
2017-04-12 17:23:29 +02:00
Ghostkeeper
53476b62bc
Re-add nozzle size for 0.8mm variants
...
Arguably the most important one. This is omitted from the original profiles so the original script assumed it had a nozzle size of 0.4mm.
Contributes to issue CURA-3650.
2017-04-12 16:33:25 +02:00
Ghostkeeper
febd1f0f79
Make sure that the UM3 definition is taken into account when optimising
...
Otherwise it acts as if the settings were the defaults for FDMPrinter rather than defaulting to the current UM3 settings.
Contributes to issue CURA-3650.
2017-04-12 16:29:36 +02:00
Jaime van Kessel
5de3b4614f
Updated type hinting
2017-04-12 16:26:25 +02:00
Jaime van Kessel
0bcde6a41c
Merge branch 'master' of github.com:Ultimaker/Cura
2017-04-12 16:21:26 +02:00
Jaime van Kessel
d7e5e5780b
Fixed width & height not being settable to 0
2017-04-12 16:21:03 +02:00
CRojasV
28df570311
Modify versión Number
...
fixed the versión number.
2017-04-12 09:06:57 -05:00
Jack Ha
2879ec0e30
Permission for file. CURA-3676
2017-04-12 15:58:37 +02:00
Jack Ha
c7a6d42920
Fixed arranger multiplying too big objects and arrange All. CURA-3676
2017-04-12 15:58:09 +02:00
Ghostkeeper
c2fdf68caf
Set Equalize Filament Flow to True for all 0.8mm profiles
...
Orders from the materials team. They mistakenly set this to False in their original profiles.
Contributes to issue CURA-3650.
2017-04-12 15:42:09 +02:00
Ghostkeeper
397c2666f0
Optimise profiles for 0.8mm cores
...
Sample testing confirms that these are equal to their originals. Nylon, PLA and PVA were already optimised, but ABS and CPE weren't. Now all are optimised except some 0.4mm core profiles. I'll see to those next. Note that the filament flow compensation setting is still wrong in these profiles (it was wrong in the original profiles as well).
Contributes to issue CURA-3650.
2017-04-12 15:38:07 +02:00
Jaime van Kessel
3e75583f2b
Huge models no longer block loading
...
CURA-3676
2017-04-12 15:09:31 +02:00
Jaime van Kessel
299ad624da
Minor refactor; Return None instead of weird 999999 if no suitable location was found
2017-04-12 15:01:39 +02:00
Jaime van Kessel
bfc8cc8a9e
Codestyle
2017-04-12 10:51:46 +02:00
Lipu Fei
5945212e4b
Remove pixel ratio for childrenRect in OpenFilesIncludingProjectsDialog
...
CURA-3642
2017-04-12 08:55:17 +02:00
Lipu Fei
f4e1212005
Use screen pixel ratio for OpenFilesIncludingProjectsDialog
...
CURA-3642
2017-04-12 08:43:48 +02:00
CRojasV
84a5717d04
Add files via upload
...
Adding makeR printers profile configuration files
2017-04-11 15:39:12 -05:00
CRojasV
a8d2e53bcb
Add files via upload
...
Adding Platforms for makeR 3D printers
2017-04-11 15:24:02 -05:00
CRojasV
bd41655772
Delete makeR_prusa_tairona_i3_platform.stl
...
Delete file in wrong path
2017-04-11 15:22:52 -05:00
CRojasV
e70409a897
Delete makeR_pegasus_platform.stl
...
Delete file in wrong path
2017-04-11 15:22:09 -05:00
