pkuiper-ultimaker
9236f21d67
Merge pull request #5888 from Ultimaker/rename_minimum_diameter
...
Rename Minimum Diameter to Maximum Tower-Supported Diameter
2019-06-17 15:39:44 +02:00
Ghostkeeper
a89465afa1
Build volume temperature should not be settable per extruder
...
Just like build plate temperature, the per-extruder profiles can still override it but it will be resolved to a single global value.
2019-06-14 11:38:18 +02:00
Ghostkeeper
52ed79805e
Enable numerous settings that just work fine with tree support
...
Found via a report in #5453 .
2019-06-14 09:51:27 +02:00
Ghostkeeper
a38984dcec
Increment setting_version to 8
...
This is required for the version upgrade.
Contributes to issue CURA-6311.
2019-06-12 09:09:41 +02:00
Ghostkeeper
f897e31e96
Rename key of support_minimal_diameter to support_tower_maximum_supported_diameter
...
A bit long, but you won't have to type it that often.
Contributes to issue CURA-6311.
2019-06-11 17:43:16 +02:00
Ghostkeeper
1620ee6825
Rename user-visible setting
...
This is the easy part...
This setting actually indicates the maximum diameter that gets supported by a tower, so it should be more of a 'maximum diameter'.
Now the setting key is very different from the setting name so we're going to change that too.
Contributes to issue CURA-6311.
2019-06-06 10:20:12 +02:00
Ghostkeeper
81919b75df
Implement Z Hop Speed
...
Z Hops have their own speeds now. It no longer uses the maximum feedrate, which was unknown for some printers and therefore limited only to light speed, which was too much for some printers to handle.
Implements CURA-6532.
2019-06-06 10:15:50 +02:00
Ghostkeeper
233ce41b29
Merge branch 'patch-1' of https://github.com/BarrensZeppelin/Cura into BarrensZeppelin-patch-1
2019-05-31 14:53:48 +02:00
Ghostkeeper
95e7835da8
Better defaults for preshrink and skin expansion distance in CLI
...
Discovered during investigation of Ultimaker/CuraEngine#1062 .
2019-05-31 13:06:10 +02:00
Mark Burton
77643d1788
Fix visibility of Connect Support Lines.
2019-05-31 07:58:47 +01:00
Oskar Haarklou Veileborg
5dca589d6a
fdmprinter.def.json: draft_shield_enable -> draft_shield_enabled
...
This seems to have been typos.
2019-05-30 11:06:41 +02:00
Cherubim
310a48a2c9
Correct American spelling: Flavour -> Flavor
2019-05-28 15:33:47 +02:00
Lipu Fei
9187738d9c
Merge pull request #4599 from DesktopMetal/feature_nozzle_switch_extra_prime_distance
...
Feature: "Nozzle Switch Extra Prime Distance"
2019-05-21 09:18:11 +02:00
Ghostkeeper
b52b6251b9
Clarify description of build volume temperature a bit
...
Contributes to #5756 .
2019-05-20 15:35:53 +02:00
Vlad Gribinchuk
055dcddd1e
Change switch_extruder_extra_prime_amount setting to be more consistent with other
2019-05-20 14:35:27 +03:00
Lipu Fei
33aae24d6d
Merge remote-tracking branch 'origin/4.1'
2019-05-17 14:41:52 +02:00
Lipu Fei
584a101902
Fix limit to extruder for support infill angle
...
CURA-6529
2019-05-17 14:19:39 +02:00
Jaime van Kessel
314a6495c4
Merge branch '4.1' of github.com:Ultimaker/Cura
2019-05-16 16:40:10 +02:00
Remco Burema
d4f891d548
Brim for prime tower fix for resolve. [CURA-6492]
2019-05-16 12:39:12 +02:00
Diego Prado Gesto
2cbdc49539
Merge branch '4.1'
2019-05-16 12:13:04 +02:00
Remco Burema
19ce6aa65f
Prime tower brim (unless raft) by default. [CURA-6492]
2019-05-15 13:27:33 +02:00
Ghostkeeper
03d96f3fb5
Merge branch '4.1'
2019-05-13 17:11:39 +02:00
Ghostkeeper
2e93948c84
Take minimum of all build volume temperature values
...
According to the Materials and Processing team here, this is better because it guarantees that the coldest of your materials won't sag.
Contributes to issue CURA-6514.
2019-05-13 17:11:13 +02:00
Ghostkeeper
a41aee98f8
Set the value for PLA as the default for build volume temperature
...
This way, most prints with 3rd party materials and 3rd party printers will be fine. Also, it requires me to change the fewest amount of profiles.
Contributes to issue CURA-6514.
2019-05-13 16:31:33 +02:00
Lipu Fei
0d0825e9f3
Merge pull request #5718 from Ultimaker/corner_preference_smart
...
Add option to prefer hiding seams in a smarter way
2019-05-09 15:59:13 +02:00
Ghostkeeper
97203c2dc1
Add option to prefer hiding in a smarter way
...
This option prefers hiding, but if no good hiding spot is available it'll expose the seam on the sharpest outer corner.
Contributes to issue CURA-6489.
2019-05-08 17:09:55 +02:00
Ghostkeeper
a17fc7842a
Merge branch '4.1' into CURA-6039_fix_raft_disabled_extruder
2019-05-08 15:21:44 +02:00
Lipu Fei
ebbc950ac1
Add build volume temperature
...
CURA-6156
2019-05-08 14:07:49 +02:00
Remco Burema
db581d4825
Fix prime tower enabled with disabled extruder(s). [CURA-6039]
2019-05-08 13:48:30 +02:00
Jaime van Kessel
979b29400a
Merge branch '4.1' of github.com:Ultimaker/Cura
2019-05-03 14:12:07 +02:00
Jaime van Kessel
e363f1af94
Remove hardcoded references to Ultimaker machines in QML
...
We shouldn't hardocode machines in QML in any case. It also created issues
for other monitor / connection flows.
2019-05-03 14:10:21 +02:00
Lipu Fei
2601e485da
Merge remote-tracking branch 'origin/4.1'
2019-05-03 10:47:16 +02:00
Lipu Fei
f89ba25faa
enable prime tower when adhesion is none or skirt
...
CURA-6492
2019-05-03 09:21:54 +02:00
Lipu Fei
3e91f89ffe
Add build volume temperature
...
CURA-6156
2019-04-26 07:43:03 +02:00
Ghostkeeper
0ad9d000ab
More consistent capital letter usage
2019-04-25 10:55:17 +02:00
Ghostkeeper
ce9f3c9bcc
Set maximum feedrate to light speed
...
For many printers this maximum feedrate is unknown. The rationale for this commit is that if it's unknown we shouldn't limit the speed settings.
This does cause the time estimations to be out of whack if the speed is limited on one axis but not on another axis, such as if you home the build plate while homing the head as well (when the head is much faster than the build plate). Because now Cura doesn't assume that there is a limit on any axis any more. It just holds the print speeds.
Many printers override these settings so that they have a more realistic value. Previously the value of 500mm/s wasn't very realistic anyway, as most printers have somewhere in the area of 250mm/s in their firmware limits.
Fixes #5640 .
2019-04-23 18:06:26 +02:00
Vlad Gribinchuk
fec0272c5f
Merge branch 'master' into feature_z_hop_extruder_switch
2019-04-22 10:45:57 +03:00
Diego Prado Gesto
a713cdc6bd
Add new values for the resolution and deviation settings
...
According to the experts
2019-04-18 17:26:01 +02:00
Vlad Gribinchuk
7d73921d63
Set "value" for retraction_hop_after_extruder_switch_height to ensure it copies the value of retraction_hop
2019-04-18 16:32:23 +03:00
Ghostkeeper
af42340e68
Slightly increase resolution by default
...
Most Marlin installations should be able to handle a bit more.
Contributes to issue CURA-6458.
2019-04-17 12:48:22 +02:00
Jaime van Kessel
acf7229d1d
Merge pull request #5620 from Ultimaker/add_maximum_deviation_setting
...
Add maximum deviation setting
2019-04-16 14:50:56 +02:00
Ghostkeeper
96abaf2376
Adjust warning values for maximum travel resolution
...
Due to the change in tactics to limit resolution by deviation, this can be increased quite a lot (as long as you don't increase deviation too much).
2019-04-16 14:02:13 +02:00
Ghostkeeper
3771040c04
Adjust warning values for maximum resolution
...
Due to the change in tactics to limit resolution by deviation, this can be increased quite a lot (as long as you don't increase deviation too much).
2019-04-16 14:02:05 +02:00
Ghostkeeper
60777b72fc
Increase defaults for Maximum Resolution significantly
...
We want to limit it mostly to the Maximum Deviation now. So also don't increase the Maximum Deviation along this time.
Contributes to issue CURA-6458.
2019-04-16 11:27:29 +02:00
Ghostkeeper
7b62eb9560
Make minimum wall flow also settable per extruder
...
It was settable per mesh but not per extruder, but we want it to be settable per extruder as well, causing all meshes printed with that extruder to use that setting value. That's how most of these settings work (like Outer Wall Speed and such).
There are some exceptions to this where a setting only makes sense if applied in per-object settings, such as Infill Mesh or support blockers, but this is not such a setting.
Fixes #5622 .
2019-04-16 09:53:53 +02:00
Ghostkeeper
cea742218b
Revert "Hide travel jerk settings for RepRap flavour"
...
This reverts commit d5fa0b395e
2019-04-16 09:42:32 +02:00
Ghostkeeper
d5fa0b395e
Hide travel jerk settings for RepRap flavour
...
The firmware doesn't support it there.
2019-04-15 14:09:14 +02:00
Ghostkeeper
932fb75145
Add maximum deviation setting
...
This setting allows tweaking the deviation from the norm separately from the length of line segments.
Implements CURA-6458.
2019-04-12 18:40:22 +02:00
Remco Burema
6242433d8e
Merge pull request #5356 from DesktopMetal/feature_wipe_script
...
Feature: "Wipe Script"
2019-04-03 14:42:18 +02:00
Vlad Gribinchuk
6e955f780b
Change description of clean_between_layers to make the relation this setting to retract_at_layer_change more clear for user
2019-04-03 13:45:19 +03:00
