Jaime van Kessel
571ee5525b
Merge branch 'libArachne_rebased' of github.com:Ultimaker/Cura into PP-25_close-to-100%-density-infill-behaviour-Arachne
2021-11-24 10:43:04 +01:00
Jelle Spijker
52d639f980
fixed missing , in json
2021-11-17 19:50:15 +01:00
Jaime van Kessel
34aa7240d4
Merge branch 'PP-55_reduce-cross3D-top-layer-bridge-distance_Arachne' of github.com:Ultimaker/Cura into libArachne_rebased
2021-11-17 14:25:57 +01:00
Jelle Spijker
322d48cdd7
Fixed speed flow equalization width factor
2021-11-15 16:54:47 +01:00
Rijk van Manen
c109bc3613
revert 100% density pattern hack
...
In the fdmprinter definition the 'infill' is created by 999999 bottom layers to change to infill pattern to lines. This hack is reverted for ultimaker printers. More info: PP-25
2021-11-15 15:42:47 +01:00
p.kuiper
3b0216a036
PP-60: Moved the libArachne setting changes and the thin wall settings from Ultimaker to All machines. So all third party machines will also get these settings.
2021-11-10 10:43:43 +01:00
Rijk van Manen
447c4e7368
optimized skin orientation for cross pattern
...
The skin orientation is optimized for the cross (3d) pattern to reduce the bridge distance. For more information see PP-55.
2021-11-10 10:14:44 +01:00
p.kuiper
de04c7d79b
PP-60: Major clean up. Moved all common (libArachne + 4.12) settings to ultimaker.def.json from which all Ultimaker machines inherit their values
2021-11-09 12:13:02 +01:00
THeijmans
9cc1a24e11
Moves arachne setting changes to ultimaker2 layer
...
Fixing a mistake from PP-28,
PP-44
2021-10-21 09:48:00 +02:00
THeijmans
3803d28d3d
Increase maximum extrusion deviation
...
See LibArachneBeta slides
2021-09-16 13:52:11 +02:00
THeijmans
dfd5768c5c
Turns on print thin walls
...
For Arachne profile iteration 2, PP-2
2021-09-16 11:56:58 +02:00
Jaime van Kessel
9fcc513edd
Add PETG quality profiles
...
CURA-8200
2021-05-03 10:46:35 +02:00
Ghostkeeper
f4f990708f
Remove old 'category' metadata
...
Most of it was incorrect and very inconsistent too. These are not used by our code any more.
2020-04-28 09:27:31 +02:00
Jaime van Kessel
8d2083a539
Add temp warnings for the buildplate
...
CURA-6977
2019-12-24 10:54:51 +01:00
Ghostkeeper
0fe9e660b1
Don't show Silicone for UM printers that are incompatible with it anyway
...
It's still an open bug that we show materials of which all configurations are incompatible with the printer.
Contributes to issue CURA-6262.
2019-03-05 15:36:31 +01:00
Aleksei S
f021c83a3e
Exclude HIPS and PETG material type from all UM printers.
...
CURA-5149
2018-03-26 16:50:59 +02:00
Ghostkeeper
202f7f87f8
Remove ID from definition files
...
Sometimes it's out of sync. Sometimes even missing. Let's just not use that any more.
Contributes to issue CURA-4243.
2017-11-02 12:53:06 +01:00
Lipu Fei
f50255f1c9
Disable relative_extrusion for UMs
...
CURA-4219
2017-09-11 10:27:13 +02:00
Ghostkeeper
4b4f971222
Make 'other' the default category
...
This should make it a bit easier for others to create a new definition since there is less for them to 'have to know'. Previously they would be required to fill in as category Other, but now they can just leave the category out.
2017-08-25 09:17:55 +02:00
Ghostkeeper
e1266ceb1f
Change Ultimaker manufacturer to Ultimaker B.V.
...
The material profiles are sent to UM3 with a manufacturer that's obtained from the printer definition rather than the material definition. The printer definition was 'Ultimaker' rather than 'Ultimaker B.V.' and the printer checked against this.
Contributes to issue CURA-4159.
2017-08-11 10:24:13 +02:00
Jaime van Kessel
1f830e68bb
Min & max values for extruder prime pos are now enforced for Ultimaker machines
...
CURA-2375
2016-09-27 16:12:02 +02:00
Ghostkeeper
6909f88ce6
Increase default limit on feed rate
...
There is no real limit by default now. Only light speed (and the limit on the input element's length). The feed rate limit should be set by a machine definition. If there is no limit set, let there be no limit to what the user can input.
Contributes to issue CURA-2284.
2016-09-06 10:30:27 +02:00
Ghostkeeper
b89a9a8113
Allow freezing temperatures
...
But not on Ultimaker printers, because they crash.
2016-08-04 12:50:03 +02:00
Tim Kuipers
67058c3d45
fix: definition visibility got borked (CURA-1443)
...
machine definition visibility should be a metadata property and should be set to true for only those definitions which are actually machines
2016-06-10 14:52:15 +02:00
Tim Kuipers
149af8af28
Merge branch 'master' into feature_accelerations_and_jerk_per_feature_settigns_rework
2016-06-10 12:29:06 +02:00
Arjen Hiemstra
6847365e09
Indicate the UM2+ should use machine specific materials and qualities
...
Contributes to CURA-1612
2016-06-02 08:10:55 +02:00
Tim Kuipers
d67bd1015e
JSON fix: visible wasn't inside metadata (CURA-1443)
2016-05-30 14:50:09 +02:00
Ghostkeeper
f15445b1a3
Translate definition for Ultimaker
...
The preferred variant/profile/material has moved to the metadata.
Contributes to issue CURA-1278.
2016-05-17 17:46:30 +02:00
