1078 commits

Author	SHA1	Message	Date
Ghostkeeper	f9b91df034	Update setting_version to 7 ... For these profiles it was somehow outdated.	2019-03-11 11:52:42 +01:00
Jaime van Kessel	0616601250	Merge branch '4.0' of github.com:Ultimaker/Cura	2019-03-11 10:39:23 +01:00
Ghostkeeper	20fc26b8ba	Correct setting version for definition files ... Otherwise the container provider actually rejects loading it completely. Contributes to issue CURA-6270.	2019-03-08 13:32:36 +01:00
Ghostkeeper	1d25f52df6	Merge branch '4.0'	2019-03-06 15:23:55 +01:00
Lipu Fei	4979b401b3	Disable prime blob by default for CFFF ... CURA-6282	2019-03-06 11:02:55 +01:00
Ghostkeeper	c665a481dd	Show settings that influence draft/ooze shields if enabled ... The skirt/brim speeds currently affect the draft and ooze shields. So if the draft or ooze shield is enabled, show those settings. Contributes to #5373.	2019-03-05 10:45:25 +01:00
Ghostkeeper	c44a207744	Remove duplicate property ... I think this is the result of a merge conflict or something. This entry should not be dependent on the number of bottom layers so I'm keeping the first one.	2019-02-27 10:23:46 +01:00
Ghostkeeper	650204dae7	Merge branch '4.0'	2019-02-21 09:09:19 +01:00
Remco Burema	1608adde00	Change of wording Skin Overlap (Percentage). [CURA-6140]	2019-02-20 09:57:48 +01:00
Remco Burema	70cd7518ed	Adjust description of Skin Overlap (Percentage). [CURA-6140]	2019-02-19 10:47:21 +01:00
Ghostkeeper	275989d193	Merge branch 'fix_prime_tower_brim_for_raft'	2019-02-18 15:17:48 +01:00
Mark Burton	1ba7b35ccc	Support gyroid support. ... Haven't actually tried printing gyroid support but at least now it can be evaluated.	2019-02-15 09:19:40 +00:00
Remco Burema	a601e0878c	Explicitly also check for Raft when checking for prime-tower=brim. [CURA-5864]	2019-02-13 15:46:39 +01:00
Jaime van Kessel	f35ad5cf83	Merge branch 'CURA-5977_test_definition_container' of github.com:Ultimaker/Cura	2019-02-13 14:02:09 +01:00
Remco Burema	da6ff7c5a9	Merge branch 'master' into temp_CURA-5864	2019-02-06 16:23:30 +01:00
Remco Burema	8f5a34c592	Merge pull request #5181 from drzejkopf/patch-4 ... Let "retraction_combing" be overriden with "infill" as default value	2019-02-05 11:25:17 +01:00
Lipu Fei	173f125d3e	Fix merge conflicts	2019-01-24 14:55:29 +01:00
Remco Burema	ecaa1bc110	Enable prime-tower-brim to work with all adhesion-types except 'Raft' instead of just 'None'. [CURA-5864]	2019-01-22 19:36:33 +01:00
Remco Burema	eda7ec492e	'Prime-tower brim' setting only visible when adhesion is set to 'None'. Also fix spelling. [CURA-5864]	2019-01-22 13:32:38 +01:00
Remco Burema	ccfa6ebb92	Set proper maximum values for brim width and line-count. [CURA-6094]	2019-01-21 17:47:01 +01:00
drzejkopf	d499f780c8	Let "retraction_combing" be overriden with "infill" as default value ... "infill" option was not added to "resolve" after adding additional combing setting, so that wasn't possible to add it as override value in printer definition	2019-01-16 14:54:24 +01:00
Remco Burema	4065c83188	Show settings prime-tower-only brim depends on when active. [CURA-5864]	2018-12-21 17:57:47 +01:00
Remco Burema	f62e8b4bb2	Create 'brim for prime tower only' option (see also backend PR). [CURA-5864]	2018-12-21 17:38:30 +01:00
Ghostkeeper	3d4da94b36	Remove obsolete description detail about old Cura versions ... This setting had a detail in the description about how the setting used to behave in old Cura versions. Let's remove it since it is not relevant any more. Fixes #4536.	2018-12-13 16:49:45 +01:00
Aleksei S	2b45262a85	Added test for definition container ... CURA-5977	2018-11-23 17:01:05 +01:00
Ghostkeeper	f10bd28c4a	Improve grammar and do similar fix for extruder end g-code ... Contributes to issue CURA-5906.	2018-11-16 17:25:32 +01:00
Jaime van Kessel	240ac1f06b	Clarify some setting descriptions	2018-11-16 13:03:45 +01:00
Aleksei S	2bf4354fed	Removed minimum_value for the setting support_roof_offset and support_bottom_offset ... CURA-5880	2018-11-15 15:57:34 +01:00
Remco Burema	13a9bb7eba	Remove enables for min. support area in case of TreeSupport. [CURA-5903]	2018-11-13 17:03:27 +01:00
Remco Burema	6307784a79	Fix some English grammar. [CURA-5903]	2018-11-13 16:50:00 +01:00
Vlad Gribinchuk	d8d92eb4b0	Merge remote-tracking branch 'upstream/master' into feature_minimum_support_area	2018-11-09 20:45:37 +02:00
Ghostkeeper	6d66060222	Don't allow support interface offset greater than support offset ... The support interface can't exceed the volume of the support now, so this is now a technical limitation. Contributes to issue CURA-5880.	2018-11-08 13:03:37 +01:00
Ghostkeeper	f132adc135	Rename 'Offset' to 'Horizontal Expansion' ... This is more consistent with other similar settings. Contributes to issue CURA-5880.	2018-11-08 12:59:24 +01:00
Ghostkeeper	dcc6003a92	Allow negative support interface offsets ... There is no technical reason why this is not allowed. You could save some material with this. Contributes to issue CURA-5880.	2018-11-08 12:50:09 +01:00
Jaime van Kessel	de8e56ae19	Merge branch 'feature_support_interface_offset' of https://github.com/DesktopMetal/Cura	2018-11-02 15:21:39 +01:00
Tim Kuipers	56fdab276e	brim_replaces_support is now based on the support infill extruder	2018-10-22 13:49:51 +02:00
Ghostkeeper	15a538bb94	Remove arbitrary limits on wall speed overhang factor ... There is no physical or programmatical limitation to the wall speed overhang factor. In particular, you could want the overhang speed to be higher than the normal printing speed.	2018-10-21 02:07:46 +02:00
Remco Burema	25000e8a6b	Fix typo's. [CURA-5760] Feature support brim.	2018-10-16 16:10:30 +02:00
Remco Burema	58490343f7	Merge pull request #4363 from BagelOrb/feat_support_brim ... Feat: support brim	2018-10-16 16:07:33 +02:00
Ghostkeeper	3c626453a6	Fix spelling	2018-10-12 11:28:30 +02:00
Tim Kuipers	ad80ea6dd4	fix: limit to extruder of top/bottom polygon connector	2018-10-12 11:16:24 +02:00
Vlad Gribinchuk	eb310116aa	JSON settings for "Support Interface Offset" feature	2018-10-09 10:50:34 +03:00
Jaime van Kessel	9970f0e752	Merge branch 'fix_polygon_connector_setting' of https://github.com/BagelOrb/Cura	2018-10-02 13:12:21 +02:00
alekseisasin	84c667265d	Merge pull request #4200 from BagelOrb/top_bottom_settings_enabled_function ... JSON fix: only enable skin settings when there is skin	2018-10-02 11:21:15 +02:00
Mark	d39f6d061b	Merge pull request #4365 from smartavionics/mb-gyroid-infill ... Add gyroid infill pattern.	2018-10-02 10:43:41 +02:00
Lipu Fei	d81cdee9b9	Merge branch 'master' into top_bottom_settings_enabled_function	2018-10-01 17:07:57 +02:00
Vlad Gribinchuk	7f09859be2	Settings for the "Minimum Support Area" and "Minimum Support Interface Area" features	2018-09-28 13:30:48 +03:00
Ghostkeeper	7d7227cfc8	Merge branch 'master' into refactor_singleton_settingsbase	2018-09-24 17:25:15 +02:00
Ghostkeeper	f6b56a6506	Merge branch '3.5'	2018-09-19 17:16:14 +02:00
Ghostkeeper	04b74d2285	Fix typo in Extra Infill Wall Count description ... Some very observant user found this small typo. Thanks.	2018-09-19 13:58:09 +02:00