Jaime van Kessel
1c2c4d4163
Added property to indicate if output device accepts commands
...
Instead of how this was previously done, it's now tied to the auth state.
CL-541
2017-11-23 17:07:24 +01:00
Jaime van Kessel
d0c7352be6
Added missing authentication_succeeded_message attribute to constructor
...
CL-541
2017-11-23 16:16:57 +01:00
Jaime van Kessel
f03a978781
Sending & compressing g-codes re-added to LegacyUM3
...
CL-541
2017-11-23 14:19:54 +01:00
Jaime van Kessel
8b8d67b3a8
LegacyUM3 now handles warnings & errors again
...
CL-541
2017-11-23 13:37:59 +01:00
Jaime van Kessel
96d5c7152b
Added sending material profiles to LegacyUM3
...
CL-541
2017-11-23 10:31:39 +01:00
Jaime van Kessel
7465a6551a
Setup the authentication stuff for LegacyUM3
...
CL-541
2017-11-22 11:59:07 +01:00
Jaime van Kessel
d8b12be5e4
LegacyUM3 now correctly gets material set
...
CL-541
2017-11-21 16:26:17 +01:00
Jaime van Kessel
0f78b05802
Connection states changes are now tied into the UI again
...
CL-541
2017-11-21 15:12:23 +01:00
Jaime van Kessel
9cfe9769d3
Printers now automatically try to connect again
...
CL-541
2017-11-21 14:47:55 +01:00
Jaime van Kessel
3f1167a7d2
Results in printer discovery are sorted again
...
CL-541
2017-11-21 14:39:03 +01:00
Jaime van Kessel
a8e71cf50c
NetworkManager is now created on demand and re-created after a certain timeout.
...
CL-541
2017-11-21 14:35:17 +01:00
Jaime van Kessel
b1649f2d38
Added PrintJob handling to ClusterUM3
...
CL-541
2017-11-21 11:01:19 +01:00
Jaime van Kessel
fd548975cc
Closing a connection now actually stops the updates
...
CL-541
2017-11-21 10:19:17 +01:00
Jaime van Kessel
a9f52c2ad6
Added data handling for Connect devices
...
CL-541
2017-11-20 17:00:02 +01:00
Jaime van Kessel
1167fa0a89
Added data handling for legacy printer
...
CL-541
2017-11-20 16:03:54 +01:00
Jaime van Kessel
61753540e4
Callbacks are now handled by url and operation type.
...
It would have been nicer to use the request, but it's unhashable.
Cl-541
2017-11-20 15:12:29 +01:00
Jaime van Kessel
59e4d1af63
re-added recheck connections
...
CL-541
2017-11-20 15:11:38 +01:00
Jaime van Kessel
4197f18fc1
First steps to ensure that the Discover UM3 action works with new architecture
...
CL-541
2017-11-20 13:35:08 +01:00
Jaime van Kessel
1b8caa7a21
NetworkedPrinterOutputDevice now requires address in constructor
...
CL-541
2017-11-20 13:23:09 +01:00
Jaime van Kessel
68e80a88bc
Rename usage of printer to more generic device.
...
The usage of "printer" is a bit confusing, as in the case of CuraConnect
it's a device that can acces multiple printers.
CL-541
2017-11-20 13:18:08 +01:00
Jaime van Kessel
9202bb11fe
Added stubs for cluster & legacy output devices
...
CL-541
2017-11-20 13:12:15 +01:00
Jaime van Kessel
22f2279a76
Moved bunch of code from the old location to the new bits in archtiecture
...
CL-541
2017-11-20 10:59:57 +01:00
ChrisTerBeke
f48539cc93
Merge pull request #2685 from Ultimaker/container_stack_improvements
...
Container stack improvements
2017-11-17 13:09:54 +01:00
Lipu Fei
2c39612bc8
Fix UM2 upgrade regarding the variant
...
CURA-4482
UM2 by default doesn't have variants, but if the user enables Olsson
Block, the variant option will become available. This commit fixes the
following cases:
- Make sure that the variant is set on the extruder stack but not the
global stack
- Extruder stacks don't contain information such as has_variant. Such
info should be retrieved from the global stack and not just from the
definition container because they can be overriden by other
containers.
2017-11-17 12:47:30 +01:00
Lipu Fei
9b102f9a7e
Remove unused function in StartSliceJob
...
CURA-4482
2017-11-17 11:03:13 +01:00
Mark
913bcf45b1
Add stderr to send errors to
2017-11-14 11:53:24 +01:00
ChrisTerBeke
88cf40e2d7
Merge branch 'master' into container_stack_improvements
2017-11-10 14:35:13 +01:00
Lipu Fei
78456d5bc3
Fix clusterSize property check in QML
2017-11-09 09:06:46 +01:00
Mark
1468c3aae5
move undefined/null check
2017-11-09 07:37:09 +01:00
Mark
fdcce1780e
Also check if base.selectedPrinter is null
2017-11-08 19:24:09 +01:00
Mark
303cf33de1
Made the message more clear
2017-11-08 10:23:19 +01:00
Lipu Fei
2be529668e
Fix download for firmware upgrade notification
...
Same issue as the download for Cura version upgrade in CURA-4464.
2017-11-07 13:04:18 +01:00
ChrisTerBeke
d32b7f0091
Merge branch 'master' into container_stack_improvements
2017-11-06 09:49:44 +01:00
Ruben D
c61b9c41ab
Fix translation of Unable to slice message
...
Previously the {0} would be filled in at runtime, causing the translation to no longer be found in the catalogue.
Contributes to issue CURA-4091.
2017-11-06 03:55:49 +01:00
Lipu Fei
25c41062e1
Fix material upgrade and version checking
...
CURA-4519
Less duplicated code, but it's still one of the worst parts...
2017-11-02 13:01:49 +01:00
ChrisTerBeke
142ff4e9dc
Merge pull request #2669 from fieldOfView/feature_jogging
...
Jogging
2017-11-01 16:15:40 +01:00
ChrisTerBeke
e29fdbe76d
Cleanup - CURA-4482
2017-11-01 14:32:58 +01:00
Diego Prado Gesto
7f76749e2c
Merge branch 'CURA-4062_layerview_laggy'
2017-11-01 13:37:44 +01:00
ChrisTerBeke
97421ecf58
Create container stacks when loading older project file - CURA-4482
2017-11-01 13:31:25 +01:00
Diego Prado Gesto
c85e10f4c5
CURA-4062 Minor changes
2017-11-01 13:31:17 +01:00
ChrisTerBeke
ce896177cb
Cleanup 3mf workspace reader - CURA-4482
2017-10-31 16:32:04 +01:00
ChrisTerBeke
7a8d562234
Merge branch 'master' into container_stack_improvements
2017-10-31 16:24:05 +01:00
ChrisTerBeke
8676792ef8
Disable annoying debug message about not found printer definition
2017-10-31 16:23:45 +01:00
ChrisTerBeke
c59e4bb3e1
Cleanup machine settings action - CURA-4482
2017-10-31 16:20:25 +01:00
ChrisTerBeke
cc6be48a79
Always use extruder stack when updating material diameter - CURA-4482
2017-10-31 16:19:16 +01:00
ChrisTerBeke
b8757b46b3
Always use extruder stack in machine settings action plugin, keep support for older project files - CURA-4482
2017-10-31 16:16:51 +01:00
ChrisTerBeke
f421166b18
Clarify 3mf saving multi extrusion setting - CURA-4482
2017-10-31 16:11:27 +01:00
ChrisTerBeke
52782b8d13
Always use the extruder stacks to determine model color in solid view - CURA-4482
2017-10-31 16:08:59 +01:00
ChrisTerBeke
a7383b42d5
Always use extruder stack when adding settings per object - CURA-4482
2017-10-31 16:04:06 +01:00
ChrisTerBeke
77cd10374c
Always set the active extruder stack when loading project file settings - CURA-4482
2017-10-31 16:00:22 +01:00
