Context: Print Thin Walls and Fill Perimeter Gaps are old settings that aren't needed any more since we switched to libArachne (Varianble Line Widths).
CURA-7148
These formulas were using a setting that didn't exist any more.
Not sure how this got through QA. Oh well, this is what they are intending.
This formula is a little bit weird in how it works with support meshes if support is disabled, but it's more or less as good as it gets. The formula is mirrored from how other Ultimaker printers write it down, but slightly simplified with the same outcome.
After https://github.com/Ultimaker/Cura/pull/8684 raft_airgap and speed_layer_0 existed twice in some of the quality profiles.
This commit fixes that by removing the old (calculated) values.
Although it is not entirely sure yet, we are fairly certain that libArachne release will have
a setting version of 18, so it is changed by this commit. With this change, the VersionUpgrader
will be properly triggered.
Contributes to CURA-7683 and CURA-7656
These IDs were the same as the Creality profiles. As a result, only one profile could load into Cura of the two duplicates. In this case it chose Biqu's profile, and the Creality profiles wouldn't load as a result.
Contributes to issue CURA-7752.
This is the default (preferred) nozzle for the FABtotum Personal Fabricator.
Apparently when these nozzle profiles were added, the existing quality profiles weren't considered. We'll now put them on the nozzle size that the FABtotum printer had before the nozzle profiles were added. There is also the Pro nozzle for FABtotum but I think the Lite is more likely what the profiles were originally made for, since that is the default.
Normally we'd require contributors to submit up-to-date profiles but in this case they did, we were just slow to respond.
Contributes to issue CURA-7757.
* Added BIQU machine base files as well as BIQU B1 machine files.
* Fixed a variants settings version error.
* Updated base def by removing excluded materials and changing the pref to pla175
* Fixed the machine name value which should only take a default value and not also a value.
* Increased the max extruder feedrate to allow the default retraction speed.
* Removed comments from the quality profiles. Removed author from variants. Adjusted materials in quality profiles to refer to the 175 profiles directly.
* Enabled coasting by default in the B1 profile and increased the width of infill for the base profile.
* Updated all quality and variants configs to use settings version 16 in anticipation of release 4.8
* Final tweaks to B1 start gcode
* Added an ABL version of the B1 with tweaked start codes.
* Add files via upload
* Add files via upload
* Add files via upload
* Update fusedform_300_draft_abs.inst.cfg
* Add files via upload
* Delete fusedform_300_draft_abs.inst.cfg
* Delete fusedform_300_draft_pla.inst.cfg
* Deletion of old files
* changes in STD quality profiles
* Changes in mini quality files
* Changes in FF600 quality files
* changes in machine definition name
* Changes in definition files
* extruder and definition linking
* ff300 inherits and extruder def
* Update fusedform_300.def.json
* category deprecation in definitions
* inherits
* ff300 extruder definition machine
* extruder machine definitions
* Fused form FF600plus machine profiles
* PETG profiles
* Update fusedform_300.def.json
* changes in start gcode
* machine configuration dynamics on definitions
* speed adjustments
* dynamics modification in petg and flex quality
* Further adjustments on dynamics definitiosn
* Modification of all files under inherits data structure.
* Quality setting version 15 to 16
* These changes are for limiting quality types in the materials defined
* Quality Modification under Global and Material specific structure
Global quality structures and material specific definitions under the global structures
A printer was added in the meantime that had setting_version = 15, which was leading to failing
tests, considering that this PR has changed the setting version to 16.
CURA-7118
We have a change now that requires a version upgrade. This triggers all profiles to update for the user, and we must update accordingly in the built-in profiles.
Contributes to issue CURA-7118.
