Mark Burton
45dc52de16
Provide separate settings for anchoring upper and lower skins in infill.
...
Just expanding the upper skins into the infill is probably sufficient for
most situations but if users want a symmetrical structure then expanding
lower skins too could be useful. Users will need to experiment to get the
desired results for a given model.
2017-02-01 08:37:20 +00:00
Mark Burton
5817905459
Added anchor_skin_in_infill setting.
...
When enabled, skin areas are increased in size so that they project into
the infill by at least the distance between infill lines.
2017-01-31 18:47:27 +00:00
Ghostkeeper
7115db6f2e
Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master
2017-01-31 10:46:36 +01:00
MaukCC
f65ea57e80
Update cartesio.def.json
2017-01-31 09:01:14 +01:00
Ghostkeeper
876de2bd03
Merge branch 'patch-1' of https://github.com/probonopd/Cura into probonopd-patch-1
2017-01-30 17:39:31 +01:00
Mark Burton
31c1684066
Merge remote-tracking branch 'upstream/master' into mb-infill-line-angles
2017-01-27 15:55:43 +00:00
Mark Burton
27a52092d3
Add the skin_angles setting which is analogous to the infill_angles setting.
2017-01-27 15:55:22 +00:00
Mark Burton
afc75b6c3e
Now uses the [int] setting type. The default value is [ ] (an empty list).
2017-01-27 15:54:58 +00:00
Ghostkeeper
4f2ec59298
Merge branch 'misc' of https://github.com/ubitux/Cura into ubitux-misc
2017-01-26 17:24:24 +01:00
Jack Ha
6defbc8649
Merge branch '2.4'
2017-01-26 15:30:50 +01:00
Jack Ha
b8967edd82
Merge branch '2.4' of github.com:Ultimaker/Cura into 2.4
2017-01-26 14:57:40 +01:00
Jack Ha
64d5d094b3
initial bed temperature: resolveOrValue to the rescue. CURA-3307
2017-01-26 14:57:26 +01:00
Clément Bœsch
bf73a76b96
definitions: fix deprecated usage of travel_speed in rigidbot
2017-01-26 13:32:47 +01:00
MaukCC
7586054cdf
Update cartesio.def.json
2017-01-26 12:41:39 +01:00
Ghostkeeper
995377907b
Hide ooze shield in single extrusion
...
The setting has no effect then, because the ooze shield gets limited to the height of the highest extruder switch and there are no extruder switches in single extrusion prints.
2017-01-26 10:55:57 +01:00
Ghostkeeper
6f3acaf8b5
Hide ooze shield in single extrusion
...
The setting has no effect then, because the ooze shield gets limited to the height of the highest extruder switch and there are no extruder switches in single extrusion prints.
2017-01-25 16:36:01 +01:00
Jack Ha
7281b46118
Merge branch '2.4'
2017-01-25 15:28:56 +01:00
MaukCC
cc499ec59e
Update cartesio.def.json
2017-01-25 14:57:42 +01:00
Mark Burton
3e7b9e99f3
Now the Infill Line Directions setting is enabled for all infill patterns.
...
The default value is now the empty string which tells the engine to use the
traditional angles (45 & 135 for lines and zig zag patterns, just 45 for
everything else.
2017-01-24 18:09:11 +00:00
Mark Burton
eebd0862cc
Merge branch 'master' into mb-infill-line-angles
2017-01-24 15:02:50 +00:00
Mark Burton
7020e01843
Don't minimise minimum!
2017-01-24 10:50:28 +00:00
Tim Kuipers
6e66a71ed9
fix: let initial layer bed temp depend on bed temp (CURA-3307)
2017-01-24 10:24:15 +01:00
MaukCC
db8f241b6d
Update cartesio.def.json
2017-01-23 12:49:28 +01:00
probonopd
e7cad12bf6
Replace default_value by value, and convert the content to a string that evaluates to the same value in Python
...
As per https://github.com/Ultimaker/Cura/issues/1316#issuecomment-274371670
2017-01-23 00:26:53 +00:00
probonopd
eaa8cbb160
Changes as suggested by @Ghostkeeper in https://github.com/Ultimaker/Cura/pull/1350#pullrequestreview-17836965
2017-01-22 22:56:59 +01:00
probonopd
90648bc756
Remove meshfix_* so that http://www.thingiverse.com/thing:692523 can be sliced
2017-01-21 15:27:39 +01:00
probonopd
6d05252dce
Fix "Unable to slice with the current settings. The following settings have errors: Prime Tower X Position, Prime Tower Y Position."
2017-01-21 13:01:47 +01:00
MaukCC
1bb62dae6f
Update cartesio.def.json
2017-01-20 10:48:34 +01:00
MaukCC
8f75f9d46a
Update cartesio.def.json
2017-01-20 10:44:20 +01:00
Mark Burton
c017013aae
Added min_infill_area setting.
...
This allows the user to specify in mm^2 the minimum area of infill regions.
Areas smaller than this will be merged into the surrounding skin rather
than being filled with infill.
2017-01-19 11:48:17 +00:00
MaukCC
7e7031cd7f
Update cartesio.def.json
2017-01-19 09:25:29 +01:00
Chris Petersen
f6110623ce
Fix typos in kossel_pro gcode variable usage
...
Replace double-braces with single-braces so that `material_bed_temperature` and `material_print_temperature` are interpolated properly.
2017-01-18 01:15:59 -08:00
Mark Burton
efc3869efe
Infill Line Directions setting can now contain an arbitrary string.
...
The SettingTextField can now cope with strings of arbitrary characters
(not just digits) so revert to plan A and let the user input a comma
separated list of angles rather than having fixed combinations. CuraEngine
will parse the list and ignore bad input.
2017-01-16 16:09:48 +00:00
probonopd
19dcb3f230
Remove magic_mesh_surface_mode and magic_spiralize
2017-01-15 15:04:57 +01:00
probonopd
86c631de26
Carry over all settings from ini and correct brand spelling
2017-01-15 12:27:02 +01:00
probonopd
33e3dea213
Create renkforce_rf100.def.json
2017-01-15 03:41:07 +01:00
Mark Burton
f46ffe0036
Merge remote-tracking branch 'upstream/master' into mb-infill-line-angles
2017-01-13 08:31:42 +00:00
MaukCC
a8a6ba836d
Create cartesio.def.json
2017-01-12 10:47:38 +01:00
MaukCC
4a8bcc49bc
Delete cartesio
2017-01-12 10:47:10 +01:00
MaukCC
95e507edd1
Create cartesio
2017-01-12 10:45:33 +01:00
awhiemstra
a2e00bd560
Merge pull request #1336 from fieldOfView/fix_center_zero_tower_pos
...
Fix prime disallowed areas when center is zero
2017-01-12 10:28:53 +01:00
Mark Burton
35f35b082d
Merge remote-tracking branch 'upstream/master' into mb-infill-line-angles
2017-01-12 08:59:34 +00:00
fieldOfView
1226b2e78e
Fix the min/max values for prime(tower) positions when center_is_zero
2017-01-11 18:05:27 +01:00
Tim Kuipers
16d8bdf628
JSON fix: prime tower thickness defaulted to zero, rather than defaulting to full prime tower (CURA-3175)
2017-01-11 16:58:22 +01:00
Enrico
671ec73131
Add definition file for 101Hero
2017-01-09 22:15:42 +01:00
Ghostkeeper
8b21efb18b
Correct description of Support Z Distance setting
...
It's rounded up, not down.
Contributes to issue CURA-2364.
2017-01-06 15:37:21 +01:00
Peter Hamberg
02f47361f1
Correct y axis print head size for printrbot simple
...
Print head size settings for printrbot simple had y min and y max mixed up,
making "print one at a time" always print in the wrong order.
2017-01-04 07:35:41 +01:00
Mark Burton
3e1668499f
Merge branch 'master' into mb-infill-line-angles
2017-01-03 16:20:03 +00:00
Mark Burton
7ee4484c76
Merge branch 'master' into mb-infill-line-angles
2017-01-03 10:43:57 +00:00
Ghostkeeper
693bc1de1c
Make skin pattern layer 0 inherit from skin pattern
...
When the user changes the skin pattern, he'd also expect the skin pattern for layer 0 to change. This commit makes the knowledge prerequisite smaller.
Contributes to pull request #1290 .
2017-01-03 10:52:15 +01:00
