Tim Kuipers
0d9514a5d0
Merge pull request #1821 from smartavionics/mb-smooth-spiralized-contours-not-per-model-or-extruder
...
Just like magic_spiralize, smooth_spiralized_contours should not be settable per model/extruder. (CURA-3771)
2017-05-12 14:53:18 +02:00
Ghostkeeper
ebd730a68d
Also add setting_version to fdmextruder
...
Since it obviously doesn't inherit from fdmprinter.
Contributes to issue CURA-3427.
2017-05-12 14:43:05 +02:00
Ghostkeeper
0f5814e52f
Add setting_version and check against it
...
This breaks all profiles since they have the wrong setting version, of course. Have to change that in every instance container now...
Contributes to issue CURA-3427.
2017-05-12 12:58:15 +02:00
Ghostkeeper
dab50f04b8
Merge branch 'mb-smooth-spiralized-contours-not-per-model-or-extruder' of https://github.com/smartavionics/Cura into smartavionics-mb-smooth-spiralized-contours-not-per-model-or-extruder
2017-05-12 11:56:52 +02:00
Jaime van Kessel
502e977c24
UM2E now has olson block upgrade selection as machine action
...
CURA-3742
2017-05-12 10:27:13 +02:00
Mark Burton
bf80e6efd5
Just like magic_spiralize, smooth_spiralized_contours should not be settable per model/extruder.
2017-05-12 09:10:21 +01:00
Ghostkeeper
396f4381dd
Resolve bed adhesion type via limit-to-extruder
...
The cause for this change is that TPU says we want to print with brim but CPE wants to print with raft. In those cases the resolve function would choose the raft because that's safer. However if the default extruder happens to be the TPU one you then get a raft made of TPU which is flexible. That defeats the purpose of the raft, and causes the raft to warp, clog on the nozzle, destroy the world, etc. So there, I saved the world once more.
2017-05-12 10:00:24 +02:00
Tim Kuipers
dadb592328
JSON feat: mold roof height (CURA-3797)
2017-05-11 21:26:15 +02:00
Arjen Hiemstra
434aaed767
Remove extruderValue call from raft setting
...
Contiributes to CURA-3738
2017-05-11 17:56:31 +02:00
Arjen Hiemstra
94881f59f5
Remove most of the "extruderValue" calls from fdmprinter support settings
...
Since limit_to_extruder is now handled by the stacks themselves, we no
longer need to account for it in the definition.
Contributes to CURA-3738
2017-05-11 17:51:10 +02:00
Ghostkeeper
e7fc36587d
Remove Cubic Subdivision Radius setting
...
Just removes the definition. No version upgrade yet. That is next up.
Contributes to issue CURA-3427.
2017-05-11 14:27:56 +02:00
Tim Kuipers
4abcc8b3f1
JSON fix: magic_spiralize had child setting (CURA-3771)
...
it shouldn't have a child setting because that child is not the underlying setting used by the engine.
Parent settings are frontend-only settings which are merely used to let the user edit multiple leaf settings at once.
2017-05-10 16:31:53 +02:00
Jaime van Kessel
2b1ca54227
Reset all first start actions for UM2go
...
CURA-3742
2017-05-10 16:28:34 +02:00
Jaime van Kessel
9e58829aba
Merge branch 'master' of github.com:Ultimaker/Cura
2017-05-10 16:25:45 +02:00
Ghostkeeper
69eb981259
Remove nozzle offsets from printer definition
...
This setting is only defined in fdmextruder, so it can't be used here.
2017-05-10 14:02:38 +02:00
Jaime van Kessel
51c08d4f53
Merge branch 'feature_extra_gradual_infill_icon' of github.com:Ultimaker/Cura
2017-05-10 14:00:15 +02:00
Ghostkeeper
9bb6aadc66
Remove non-existing nozzle offset settings
...
They seem to be auto-generated or some sort.
2017-05-10 13:59:02 +02:00
Ghostkeeper
6f355d9006
Make 3DMaker Starter visible again
...
For some reason it was made invisible in 4e3e466a11
. It just works fine.
2017-05-10 12:01:59 +02:00
Ghostkeeper
8c9c20c8cb
Disable prime tower for UM3 ABS
...
It was already disabled for ABS 0.8mm.
2017-05-10 11:20:02 +02:00
Ghostkeeper
6d72f512a5
Set prime tower size by default to 20
...
This was found by the materials team to be a better value. All UM3 profiles have 20 now. I've left the third-party machines intact which override the prime tower size but those that didn't override the prime tower size have their prime tower size altered as well.
2017-05-10 10:57:37 +02:00
Tim Kuipers
56bf25cefa
fix: typo in limit_to_extruder of Innfill Speed (CURA-3740)
2017-05-09 14:57:04 +02:00
Tim Kuipers
486c6e16d0
fix: limit infill wipe to infill extruder (CURA-3740)
2017-05-09 14:56:41 +02:00
Jack Ha
b4b5061e0e
Visibility for smooth spiralize. CURA-3771
2017-05-09 14:44:26 +02:00
jack
ef5d72a72a
Merge pull request #1787 from smartavionics/mb-add-smooth-spiralized-contours-setting-for-master
...
Add smooth_spiralized_contours setting to control smoothing of contours when spiralizing.
2017-05-09 14:41:40 +02:00
Tim Kuipers
dfbd4107a4
Revert "Enable Support settings that are applicable to support meshes. CURA-2747"
...
This reverts commit a5033bae54
.
2017-05-09 14:38:36 +02:00
Jaime van Kessel
57e6c031aa
UM2Go no longer shows olson block dialog
...
CURA-3742
2017-05-09 13:18:34 +02:00
Jaime van Kessel
eb677f5625
Merge branch 'feature_cutting_mesh' of github.com:Ultimaker/Cura
2017-05-09 10:20:27 +02:00
Lipu Fei
2887819153
Only enable "prime_blob_enable" for UM3
...
CURA-3634
2017-05-09 10:14:43 +02:00
Ghostkeeper
17ad6a34ca
Merge branch 'master' of github.com:Ultimaker/Cura
2017-05-08 16:50:46 +02:00
Tim Kuipers
e6cf4a4538
JSON Prime Blob description wording (CURA-3634)
2017-05-08 16:46:09 +02:00
Ghostkeeper
24f8404aeb
Merge branch 'maukcc-master'
2017-05-08 16:45:02 +02:00
Ghostkeeper
70749ee0ec
Merge branch 'master' of github.com:Ultimaker/Cura
2017-05-08 15:51:50 +02:00
Ghostkeeper
08857e3908
Rename Expand Upper/Lower Skins to Expand Top/Bottom Skins
...
Also in the description.
Contributes to issue CURA-3779.
2017-05-08 15:51:35 +02:00
Jaime van Kessel
bb0d534f4a
Revert "Set machine_extruder_count in sync with defined extruders"
...
This reverts commit b69f337ddb
.
2017-05-08 15:31:44 +02:00
Jaime van Kessel
ac39934336
Revert "Starting machineSettingAction no longer resets extruder count to 1"
...
This reverts commit 452a6a095c
.
2017-05-08 15:30:39 +02:00
Jaime van Kessel
488752d4e3
Merge branch 'feature_add_alya3dp' of https://github.com/fieldOfView/Cura
2017-05-08 15:18:15 +02:00
Jaime van Kessel
293f1ac029
Merge branch 'feature_um2_olsson' of https://github.com/fieldOfView/Cura
2017-05-08 14:35:37 +02:00
Jaime van Kessel
452a6a095c
Starting machineSettingAction no longer resets extruder count to 1
2017-05-08 14:25:13 +02:00
jack
7dfa46d351
Merge pull request #1713 from Ultimaker/feature_CURA-3634_optional_priming
...
CURA-3634: Make prime blob optional
2017-05-08 13:38:13 +02:00
Ghostkeeper
6f383d4cc4
Make extruder_nr settable per extruder
...
It is actually being set per extruder right now, since this is where the definition gets its extruder number from. If the setting is not settable per extruder, the ExtruderStack skips the setting entirely and defers to the global stack, which doesn't have the setting and so None is returned. This was giving errors.
Contributes to issue CURA-3772.
2017-05-08 13:35:28 +02:00
MaukCC
570b8767e0
Update cartesio.def.json
2017-05-08 13:27:01 +02:00
Lipu Fei
48862ed2b2
Change to "prime_blob_enable" and update description
...
CURA-3634
2017-05-08 13:13:33 +02:00
Lipu Fei
887a9d377a
Use setting name "Prime Blob"
...
CURA-3634
2017-05-08 10:13:59 +02:00
Lipu Fei
319f5f73fe
Rename "prime_enable" to "prime_poop_enable"
...
CURA-3634
2017-05-08 08:12:49 +02:00
Shaische
d0e4554b59
Update delta_go.def.json
2017-05-06 18:24:35 -04:00
14bitVoid
c5bc370822
First layer line width
2017-05-06 23:20:19 +02:00
Mark
e3b17579e8
Merge branch 'feature_extra_gradual_infill_icon' of github.com:Ultimaker/Cura into feature_extra_gradual_infill_icon
2017-05-05 19:21:13 +02:00
Ghostkeeper
6b74b0d499
Set default gradual infill step height to 1.5mm
...
All of the profiles currently in Cura that set the gradual infill steps also set the step height (to 3 to 5 layer heights). I'd have chosen 4 layer heights as default based on that, but our material experts say that 1.5mm is about right for most models.
Contributes to issue CURA-3732.
2017-05-05 17:25:34 +02:00
Tim Kuipers
15367a68d7
WARNING: TO BE REMOVED! impossible settings limit_to_extruder: overlap percentage
...
CURA-3740
These settings inherently have to do with multiple features and
so we should find a value function which depends on
settings from the extruder trains corresponding to those features (wall, skin, infill).
However, we haven't found those functions yet and we have to do research.
Once we have found the formula these settings shouldn't depend on a single extruder any more
and so we should remove the limit_to_extruder.
2017-05-04 17:45:50 +02:00
Tim Kuipers
8d6862be50
JSON infill/skin value function (CURA-3740)
...
value function is an initial try to get a better value function based on both feature types of walls and skin/infill
2017-05-04 17:45:03 +02:00