867 commits

Author	SHA1	Message	Date
Ghostkeeper	d1d566bfc0	Merge branch '3.2'	2018-01-18 13:29:36 +01:00
Ghostkeeper	dc08e7f043	Merge branch 'mb-move-wall-order-opt-setting' of https://github.com/smartavionics/Cura into smartavionics-mb-move-wall-order-opt-setting	2018-01-18 13:23:16 +01:00
Lipu Fei	4bc488ca79	Change wording to "Aluminium" ... CURA-4461	2018-01-17 10:50:48 +01:00
Diego Prado Gesto	da4c98b204	Merge branch 'master' into feature_multiple_BP	2018-01-16 09:59:21 +01:00
Diego Prado Gesto	10c9ea68b4	CURA-4461 Change builplate type's label	2018-01-11 13:53:09 +01:00
Diego Prado Gesto	cea9f359cd	CURA-4461 Set active buildplate in the global container stack when is ... changed in the UI. Add a new setting for distinguish between types of build plates.	2018-01-10 14:05:38 +01:00
jack	4751de00ae	Merge pull request #3089 from fieldOfView/feature_support_mesh_enhancements ... Support Mesh enhancements	2018-01-10 11:58:22 +01:00
Jack Ha	b295d915f8	Fix line support_infill_rate / support_line_distance for support meshes without generating any support. CURA-4777	2018-01-10 11:08:32 +01:00
Diego Prado Gesto	342bdda641	CURA-4461 Add missing keys	2018-01-09 13:54:01 +01:00
Diego Prado Gesto	d31eaca1b7	CURA-4461 Add default buildplate temperature setting	2018-01-09 13:35:42 +01:00
fieldOfView	8dd5b166f4	Move 'Drop Down Support Mesh" to "Support" section... ... ... so it can be added as a per model setting for Support Meshes	2018-01-06 22:46:59 +01:00
Ghostkeeper	a717960695	Disallow negative branch angles ... The engine can't really handle that any more. Contributes to issue CURA-4523.	2018-01-05 13:46:05 +01:00
jack	5273fcf238	Merge pull request #2790 from Ultimaker/feature_tree_support ... Tree support	2018-01-04 16:57:52 +01:00
Lipu Fei	d778856025	Merge pull request #3009 from smartavionics/mb-add-infill_enable_travel_optimization ... Added infill_enable_travel_optimization setting.	2018-01-04 15:09:58 +01:00
Jack Ha	d19015e85f	CURA-4523 solved merge conflict	2018-01-04 10:47:24 +01:00
Ghostkeeper	e18b3b3669	Remove duplicate setting ... Some merge conflict, I think. Contributes to issue CURA-4523.	2018-01-03 17:29:49 +01:00
Mark Burton	f82753b766	Move optimize_wall_printing_order from experimental section to shell. ... Still not enabled by default yet but perhaps in the future after it has been tested more it will be.	2018-01-02 09:39:20 +00:00
Ghostkeeper	bf2972200d	Clarify infill/skin overlap setting descriptions a bit ... Discovered during work on CURA-4732.	2017-12-28 18:09:44 +01:00
Mark Burton	97b051907f	Added infill_enable_travel_optimization setting. ... Enabling this can greatly reduce the travel time during the printing of infill but it can be expensive to compute so now the user can decide whether to use it or not.	2017-12-18 14:52:25 +00:00
Ghostkeeper	f538c3a686	Allow support bottom extruder to be set with tree support ... It is now implemented. Contributes to issue CURA-4523.	2017-12-18 15:30:21 +01:00
Ghostkeeper	2451e90370	Increase default resolution for tree support ... Otherwise you get lines falling completely next to the previous layer. Contributes to issue CURA-4523.	2017-12-18 09:57:03 +01:00
Ghostkeeper	948301c531	Remove duplicate setting definition ... I think this was a merge conflict. Contributes to issue CURA-4523.	2017-12-12 09:28:42 +01:00
Ghostkeeper	9a94e73b63	Merge branch 'master' into feature_tree_support	2017-12-12 08:40:57 +01:00
Ghostkeeper	1029d4509c	Merge branch 'master' into feature_local_container_server	2017-12-08 16:03:05 +01:00
Ghostkeeper	b453e0a4e7	Allow minimum layer time to be higher than the fan speed min/max threshold ... Previously that wasn't possible because the division that calculated the slope of the fan speed ramping up towards the minimum layer time couldn't deal with negative values. Now it deals with that properly and in the limit the regular fan speed will be used. Fixes #2328 and CURA-4272.	2017-12-04 11:27:37 +01:00
Ghostkeeper	dad99f5292	Merge branch 'master' into feature_local_container_server ... Contributes to issue CURA-4243.	2017-11-29 13:06:08 +01:00
alekseisasin	d4dfca3ef5	Merge pull request #2868 from Ultimaker/feature_adaptive_layer_heights ... Add experimental settings for adaptive layer heights - CURA-4524	2017-11-29 09:48:33 +01:00
ChrisTerBeke	e6b3773d8e	Merge pull request #2797 from Ultimaker/feature_firmware_retract_setting ... Add setting to determine whether to use firmware retraction	2017-11-28 13:45:38 +01:00
ChrisTerBeke	cf187215dd	Add experimental settings for adaptive layer heights - CURA-4524	2017-11-28 11:44:20 +01:00
Ghostkeeper	65ea8a614c	Don't make filter_out_tiny_gaps a child setting of fill_perimeter_gaps ... Parent settings are not used by the engine. Or they shouldn't be, because the parent settings are disabled by the front-end when all of their child settings are overwritten. Then you'd have a parent setting that is used by the engine but you can't modify it. Also, the command-line slicing doesn't load parent settings since it can't parse categories and such.	2017-11-27 13:54:29 +01:00
Ghostkeeper	a0ae7489f8	Less technical term for X/Y offset of infill ... Just in the description. It's good to describe a setting using different words than the setting name. Contributes to issue CURA-4601.	2017-11-24 13:16:14 +01:00
Ghostkeeper	9ecfd5510a	Clarify description for when bed temperature is 0 ... Fixes #2674.	2017-11-24 10:42:09 +01:00
Jack Ha	0a2a9a2589	CURA-4533 added setting 'Filter out tiny gaps'	2017-11-22 09:42:03 +01:00
Lipu Fei	b439581e2d	Merge pull request #2816 from Ultimaker/CURA-4104 ... CURA-4104 added settings for flow rate compensated extrusion	2017-11-20 15:27:56 +01:00
Aleksei S	9337cc8a7f	Merge branch '3.1' into print_simulation_view	2017-11-20 14:32:22 +01:00
Mark	c1733dd908	Update fdmprinter.def.json	2017-11-20 14:19:58 +01:00
Jack Ha	12bee471eb	CURA-4104 added settings for flow rate compensated extrusion	2017-11-20 14:06:03 +01:00
Ghostkeeper	a5a15df08d	Add setting to set the maximum mesh resolution ... Implements issue CURA-4590.	2017-11-20 13:41:28 +01:00
Ghostkeeper	94dd524785	Add setting to determine whether to use firmware retraction ... This allows printers to determine this for themselves. By default it's based on the g-code flavour in the same way as it is now implemented in the engine. Fixes #1097.	2017-11-17 11:13:15 +01:00
Ghostkeeper	f27494d60a	Move ironing into shell category ... It is no longer considered experimental.	2017-11-17 10:59:14 +01:00
Ghostkeeper	15a50511b7	Don't crash if support density is 0 ... Found while working on CURA-4523.	2017-11-17 10:57:23 +01:00
Ghostkeeper	fc187d100a	Add setting to tweak collision area sampling resolution ... Because this can make a lot of difference for the slice time and the stability of the support. Contributes to issue CURA-4523.	2017-11-15 16:00:42 +01:00
Ruben D	8dd91519a6	Move Support Chunk Size out of children of skip_some_zags ... The rule is that leaf settings are the ones that are used by the engine. The support_skip_some_zags setting is used by the engine.	2017-11-15 00:54:08 +01:00
Ghostkeeper	7c85b222b2	Don't use support infill by default when printing tree support ... Only when using area support really. Contributes to issue CURA-4523.	2017-11-14 17:45:45 +01:00
Ghostkeeper	bb4cb1eb7d	Make support infill related settings visible if support tree enabled ... Because the areas generated by support trees are also filled in as normal. Contributes to issue CURA-4523.	2017-11-13 17:58:50 +01:00
Ghostkeeper	57a2bf7c5f	Move tree support to the top of the support category ... Because it's logical to have it before all of the settings that are enabled/disabled by it. Contributes to issue CURA-4523.	2017-11-13 16:33:46 +01:00
Ruben D	6d05c320a8	Remove disfunctional initial layer z offset settings ... The pull request for the engine wasn't merged. It looks like the pull request for the front-end settings wasn't merged either, but here they are. They shouldn't be here. Fixes #2744.	2017-11-11 17:51:33 +01:00
Ghostkeeper	4cc895b54b	Use 1 wall for tree support by default ... Contributes to issue CURA-4523.	2017-11-10 13:06:29 +01:00
Ghostkeeper	cd6b1aca29	Add branch diameter angle setting ... It's a bit obscure. Could we devise a better setting name? Contributes to issue CURA-4523.	2017-11-10 13:05:32 +01:00
Lipu Fei	183c63f765	Merge pull request #2720 from Ultimaker/Update_Infill_Patern_Description ... Add_tri-hexagon_and_cross_to_pattern_description	2017-11-09 08:14:35 +01:00