Tim Kuipers
0c6a2f0f6d
Merge branch 'master' into feature_support_stair_width
2017-03-30 12:02:37 +02:00
Ghostkeeper
2810054f8e
Fix spelling of maximum skin angle expansion description
2017-03-27 16:00:09 +02:00
Ghostkeeper
780e24d050
Merge branch 'master' of https://github.com/austin-makeit/Cura into austin-makeit-master
2017-03-21 10:45:43 +01:00
austin-makeit
6ed00900fe
Update and rename makeit_pro_m to makeit_pro_m.def.json
2017-03-20 10:43:10 -07:00
austin-makeit
f5c9620d3b
Update and rename makeit_pro_l to makeit_pro_l.def.json
2017-03-20 10:42:37 -07:00
Jack Ha
c1ca2ac09a
Merge branch '2.5'
2017-03-20 12:56:35 +01:00
Tim Kuipers
35516ccc45
JSON fix: tetrehedral infill line distance was wrong (CURA-3474)
...
the infill line distance in the frontend is the average line distance, not the line distance between two lines which are equidistant
2017-03-17 15:05:01 +01:00
austin-makeit
8cd5c8bb69
Update makeit_pro_m
2017-03-16 15:50:54 -07:00
austin-makeit
918c5e1254
Update makeit_pro_l
2017-03-16 15:49:35 -07:00
austin-makeit
e4d32db873
Merge pull request #1 from austin-makeit/patch-2
...
Create MAKEiT definitions and extruders
2017-03-16 15:41:01 -07:00
austin-makeit
179919d14c
Create makeit_pro_m
2017-03-16 15:33:13 -07:00
austin-makeit
d0ce717add
Create makeit_pro_l
2017-03-16 15:30:42 -07:00
Tim Kuipers
36420070fa
JSOn fix: more description on support_bottom_stair_step_height (CURA-3380)
2017-03-16 13:02:50 +01:00
Jaime van Kessel
134425db90
Merge branch '2.5' of github.com:Ultimaker/Cura
2017-03-16 11:27:54 +01:00
Jaime van Kessel
1f734d5245
Disabled the start_layers_at_same_position setting
2017-03-16 11:21:08 +01:00
Jaime van Kessel
6da6ae1b9e
start_x and start_y are now settable per extruder
2017-03-16 11:19:44 +01:00
Jaime van Kessel
5bcfba0f17
Revert "removal: remove start_layers_at_same_position; it is now mandatory to start each layer near the given position (CURA-3339)"
...
This reverts commit 1482c27b21
2017-03-16 11:16:55 +01:00
Tim Kuipers
9302f4e9c6
JSON feat: support_bottom_stair_step_width (CURA-3380)
2017-03-16 11:14:53 +01:00
Tim Kuipers
999e59be66
fix: can now insert negative mold angle values (CURA-3512)
2017-03-15 16:21:42 +01:00
Tim Kuipers
09855bc21c
fix: 90 mold angle now possible (CURA-3512)
2017-03-15 15:12:08 +01:00
probonopd
9dbb7fcc15
Update as per discussion in https://github.com/Ultimaker/Cura/pull/1350
2017-03-14 18:31:58 +01:00
Tim Kuipers
a46e84939b
JSON fix: better mold angle warning (CURA-3512)
2017-03-13 18:07:31 +01:00
Tim Kuipers
85356d621c
lil default (CURA-3512)
2017-03-13 18:00:51 +01:00
Tim Kuipers
4294a162e6
lil typo fix (CURA-3512)
2017-03-13 17:39:04 +01:00
Tim Kuipers
914aa89711
feat: model to mold (CURA-3512)
2017-03-13 17:19:29 +01:00
Jack Ha
d7e35fa480
Added global qualities for Superdraft and Verydraft. CURA-3510
2017-03-13 14:32:45 +01:00
Ghostkeeper
41e3336ea9
Merge branch 'feature_omp_writeGcode' into 2.5
2017-03-13 09:34:37 +01:00
Ghostkeeper
137de23221
Always prefer 0.4mm nozzles at initial loading
...
Otherwise we might end up with 0.8mm AA cores, and those don't have a normal quality profile so that gives all sorts of trouble.
2017-03-10 18:20:42 +01:00
Tim Kuipers
5e782ae85b
fix: type fix for last commit (CURA-3440)
2017-03-10 16:03:23 +01:00
Tim Kuipers
b03ac3ea78
JSON fix: skin angle for expansion is max angle; better description (CURA-3440)
2017-03-10 15:59:47 +01:00
Tim Kuipers
e20b4ef179
Merge branch 'mb-combing-retract-before-outer-wall' of https://github.com/smartavionics/Cura into smartavionics-mb-combing-retract-before-outer-wall
2017-03-08 11:35:07 +01:00
Tim Kuipers
0f5f163fdf
fix: prime tower thickness has rounding (CURA-3180)
2017-03-08 11:05:37 +01:00
Mark Burton
5a7812b4b7
Rename combing_retract_before_outer_wall setting to travel_retract_before_outer_wall.
...
The forced retraction can now occur irrespective of whether combing is in use or not.
2017-03-08 09:30:58 +00:00
Tim Kuipers
3047ff26f1
fix: min warning for skin angle (CURA-3440)
2017-03-07 13:09:30 +01:00
Mark Burton
c9cdc40807
Merge remote-tracking branch 'upstream/master' into mb-combing-retract-before-outer-wall
2017-03-06 18:07:08 +00:00
Ghostkeeper
37e7971b81
Merge branch 'feature_temp_disable'
2017-03-06 16:51:59 +01:00
Tim Kuipers
87c8ff0e08
Merge branch 'mb-infill-line-angles' of https://github.com/smartavionics/Cura into smartavionics-mb-infill-line-angles
2017-03-06 14:31:57 +01:00
Tim Kuipers
34d99b5ab3
Merge branch 'smartavionics-mb-anchor-skin-in-infill'
2017-03-06 13:45:46 +01:00
Tim Kuipers
aca2faa696
fix: combing_retract_before_outer_wall always causes retraction now (CURA-3438)
2017-03-06 12:56:27 +01:00
Tim Kuipers
8fa3be5bf8
Merge branch 'mb-combing-retract-before-outer-wall' of https://github.com/smartavionics/Cura into smartavionics-mb-combing-retract-before-outer-wall
2017-03-06 12:51:04 +01:00
Ghostkeeper
44859210cc
Tweak bed adhesion settings
...
These settings are said to improve bed adhesion.
See https://github.com/Ultimaker/Cura/pull/1350#issuecomment-284247064
2017-03-06 11:13:20 +01:00
Tim Kuipers
4878a50b61
JSON refactor: skin expansion descriptions, defaults and new min_skin_angle_for_expansion settings (CURA-3440)
2017-03-03 14:50:46 +01:00
Tim Kuipers
a7e08f10a4
JSON fix: only enable skin expansion settings when we have it enabled (CURA-3440)
2017-03-03 12:41:54 +01:00
Tim Kuipers
5550dbf53f
JSON fix: don't expand bottom skins by default (CURA-3440)
2017-03-03 12:41:14 +01:00
Tim Kuipers
3a92bf73a8
JSON fix: moved expand_skins_expand_distance and min_skin_width_for_expansion out of illegitimate parent (CURA-3440)
2017-03-03 12:37:06 +01:00
Tim Kuipers
ca9c32c0aa
Merge branch 'mb-anchor-skin-in-infill' of https://github.com/smartavionics/Cura into smartavionics-mb-anchor-skin-in-infill
2017-03-03 12:15:44 +01:00
Ghostkeeper
d372e73eda
Adjust warning values for temperatures
...
We know that some printers (e.g. UM3) are able to reach at least 285 degrees so we set that to be our warning value now.
The warning value for the bed temperature was probably mixed up with the warning value for nozzle temperature. Fixed that too.
2017-03-02 10:36:19 +01:00
Mark Burton
aef39991a2
Disable infill_angles setting when infill_pattern is concentric, concentric_3d or cubicsubdiv.
2017-03-02 07:47:41 +00:00
Mark Burton
d6bed392e4
Disable skin_angles setting when top_bottom_pattern is concentric.
2017-03-02 07:46:55 +00:00
Mark Burton
c0fc8287c0
Rename expand_skins_shrink_distance setting to min_skin_width_for_expansion.
2017-03-01 14:47:56 +00:00
