The top of the build plate mesh seems to be 1mm into the build volume in its actual coordinates. The mesh was lowered by 0.8mm. Probably they tried to lower it by 1mm first and then found that it was z-fighting. I'm resolving the z-fight the other way around so that the mesh actually appears completely below the build volume. This makes the build plate grid more clear. No more grey film on top of it.
Left and right anchors can't work at the same time with the horizontalCenter. In this case it
makes more sence to remove the horizontalCenter, since the left and right ones also define the
width of the rectangle.
CURA-8014
Place images in resources/images/whats_new/N.format and texts in resources/texts/whats_new/N.format where N is the ordinal and format the respective allowed formats.
CURA-8014
When deleting profiles, the current item is set to null.
The Activate button was checking if the current profile was already active, and disabling the button if it was. But the button was still enabled if the current item is null because isCurrentItemActivated is only true if there is a current item. So to properly disable the button we need to check also if there is a current item.
The onItemsChanged signal can also trigger if the item that matches the toSelectItemName has no quality_changes_group, i.e. a built-in profile.
Probably fixes Sentry issue CURA-43.
Atom 3 machine definitions file:
- Not correctly set maximum or minimum values are removed
- removed "default_values" where "values" are present
- "support_z_distance" is now dependent on the "layer_height"
- "support_top_distance" and "support_bottom_distance" are removed to as they should be equal to the "support_z_distance"
Removes custom settings in the machine definition files. These were used to set custom values for the maximum print temperature, maximum retraction speed and distance based on the tool which is used (PTFE or full metal hot end). Thus all variants are also updated. This is done based on feedback of a pull request.
