The reason of this issue because it used a heated firmware from his
parent(UMO) printer. To avoid this case we need to define externally
the firmware_hbk_file property in umo+ defintion file
CURA-5994
For instance, the buttons were converted to either primary buttons or secondary buttons. A new CheckBox component was created in Cura in order to reuse it in the future.
Contributes to CURA-6005.
Doing that, the elide will work. Also increase the size of the panel a bit so it will fit better in other languages. Adding also the tooltip in case the text is too long in other languages.
The default values on my Monoprice Ultimate are way different to what Cura has the Wanhao Duplicator 6 as. I'm guessing that Monoprice have changed these (if not, then maybe the Duplicator 6 file is wrong?). Without this profile, I had a 4hr print estimate for a piece that's only 55% through after 4hours. With this profile, it estimates 7:22 (which seems very accurate).
I got the default values from the printer when I connected Octoprint to it:
```
21:20:56: Attempting to connect to printer
21:20:56: Connection opened
< 21:20:57: start
> 21:20:57: N1 M110 *2
< 21:20:57: echo:Marlin 1.0.0
> 21:20:57: N2 M110 *1
< 21:20:57: echo: Last Updated: Jun 26 2016 12:14:19 | Author: Version DEV 3.01
> 21:20:57: N3 M115 *5
< 21:20:57: Compiled: Jun 26 2016
< 21:20:57: echo: Free Memory: 1961 PlannerBufferBytes: 1232
< 21:20:57: echo:Stored settings retrieved
< 21:20:57: echo:Steps per unit:
< 21:20:57: echo: M92 X80.04 Y80.04 Z400.48 E94.30
< 21:20:57: echo:Maximum feedrates (mm/s):
< 21:20:57: echo: M203 X300.00 Y300.00 Z5.00 E25.00
< 21:20:57: echo:Maximum Acceleration (mm/s2):
< 21:20:57: echo: M201 X3000 Y3000 Z100 E500
< 21:20:57: echo:Acceleration: S=acceleration, T=retract acceleration
< 21:20:57: echo: M204 S800.00 T800.00
< 21:20:57: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
< 21:20:57: echo: M205 S0.00 T0.00 B20000 X10.00 Z0.40 E1.00
< 21:20:57: echo:Home offset (mm):
< 21:20:57: echo: M206 X0.00 Y0.00 Z0.40
```
This padding made it break the height of the item for some reason. I guess that is a Qt bug.
In any case, the padding shouldn't be there either since the lining is on the inside of the child buttons so the padding only causes a gap to appear on the left and right sides, which looks weird.
Contributes to issue CURA-6029.
