2033 commits

Author	SHA1	Message	Date
Erwan MATHIEU	6b275d2914	Merge branch 'CURA-12833_improve-bridge-lines-direction' into CURA-12361_add-skin-support	2025-12-11 16:45:29 +01:00
Erwan MATHIEU	00f3646541	Merge branch 'main' into CURA-12833_improve-bridge-lines-direction	2025-12-11 16:45:10 +01:00
Erwan MATHIEU	9de6f6f2ac	Remove obsolete settings ... CURA-12361	2025-12-11 11:23:30 +01:00
HellAholic	67bae5fda3	Merge branch 'main' into CURA-12701_user_estimation_factor	2025-12-09 14:06:06 +01:00
Erwan MATHIEU	95999291c3	Add settings for skin support ... CURA-12361	2025-11-27 14:28:51 +01:00
Erwan MATHIEU	b172dbc356	Add description to bridge lines interlacing setting. ... CURA-12833	2025-11-26 11:37:45 +01:00
Erwan MATHIEU	a2e2e851a2	Add setting to enable interlaced bridging lines ... CURA-12833	2025-11-25 16:21:59 +01:00
Erwan MATHIEU	d2b16e912f	Restore separate start/end inwards moves settings ... CURA-12822	2025-11-12 16:12:57 +01:00
Erwan MATHIEU	d5c742bf3a	Rename setting to specific it's a length ... CURA-12822	2025-11-11 09:35:30 +01:00
Erwan MATHIEU	6ae33b74c6	Use a single setting for infill inwards distance ... CURA-12822 Having 2 separate distances is not possible since we don't know in advance which part of the extrusion path will be used as a start or an end. This should be good enough.	2025-11-07 12:31:19 +01:00
Erwan MATHIEU	1330afde05	Add settings for the infill inwards move ... CURA-12822	2025-11-07 11:21:38 +01:00
Erwan MATHIEU	2e8bb25ccc	Lower the warning value for roofing_expansion	2025-10-23 11:40:20 +02:00
HellAholic	7e474579bf	Merge branch '5.11' into CURA-12797_make-multi-material-settings-settable-per-mesh	2025-10-21 10:01:16 +02:00
Erwan MATHIEU	e641b5f78f	Change "extension" to "expansion" ... CURA-12798	2025-10-17 11:40:21 +02:00
Erwan MATHIEU	2873deab46	Change "deepness" to "depth" ... CURA-12797 Deepness is actually not an English word, sorry I'm French :D	2025-10-17 11:12:28 +02:00
Erwan MATHIEU	eb3a50fb73	Set multi-material settings per-mesh ... CURA-12742	2025-10-17 11:05:07 +02:00
HellAholic	ca37cfeb12	Merge branch '5.11' into PP-685_small_profile_bugs_511	2025-10-16 09:42:22 +02:00
Frederic Meeuwissen	73b9bdc91b	Constrain skin expand distance	2025-10-15 13:17:46 +02:00
Erwan MATHIEU	5eeb10cd8c	Disable roofing extension by default ... CURA-12446	2025-10-14 16:37:46 +02:00
Erwan MATHIEU	db90499231	Add setting for roofing extension ... CURA-12446	2025-10-14 16:37:30 +02:00
Erwan MATHIEU	a663d14400	Merge branch 'main' into CURA-12449_handling-painted-models-map	2025-09-19 13:33:41 +02:00
HellAholic	ecf0ca64f3	Merge branch 'main' into CURA-12294_remove-seam-none-corner	2025-09-17 11:19:35 +02:00
HellAholic	9aef50363f	Apply printer-linter format	2025-09-15 04:47:28 +00:00
HellAholic	326a2f911d	type correction for minimum value and maximum value ... Setting type is float, so the min/maximum_value should also have a float value rather than a string	2025-09-15 06:46:17 +02:00
Saumya Jain	b3b97c3da4	Merge branch 'main' into CURA-12294_remove-seam-none-corner	2025-09-12 15:32:21 +02:00
Erwan MATHIEU	9438177968	Merge branch 'main' into PP-655_s8_legacy_cores	2025-09-12 11:20:13 +02:00
Erwan MATHIEU	739a15f3c0	Remove "None" seam corner preference ... CURA-12294	2025-09-11 17:57:34 +02:00
Erwan MATHIEU	e2b19731ab	Merge branch 'main' into CURA-12449_handling-painted-models-map	2025-09-11 09:00:07 +02:00
Erwan MATHIEU	6e6849c9c1	Take care of layer height for paint resolution ... CURA-12584 Since the meshes generation has been once more optimized, we can now use lower resolutions.	2025-09-08 15:21:04 +02:00
HellAholic	b6adeb0fe3	add machine_time_estimation_factor to the fdmprinter ... Setting is only front-end side and does not affect slicing.	2025-09-06 10:14:05 +02:00
Frederic Meeuwissen	43015f9543	Make bridge_wall_min_length settable per extruder	2025-09-01 17:02:41 +02:00
HellAholic	da90d27015	Set default_value and minimum_value for Inside Travel avoid distance ... Minimum value is set to half the nozzle width as any lower could potentially cause collision with the printed outer wall Default value is set to 0.6	2025-08-20 09:54:10 +02:00
Remco Burema	8d42bb1f71	Apply suggestions from code review ... Co-authored-by: Casper Lamboo <c.lamboo@ultimaker.com>	2025-08-19 12:26:23 +02:00
HellAholic	3da366f316	Apply printer-linter format	2025-08-11 10:58:51 +00:00
HellAholic	e83c21a5d9	Merge pull request #19968 from Asterchades/main ... Update Top/Bottom Layers formula	2025-08-11 12:57:44 +02:00
HellAholic	0bc7ef72a0	Merge pull request #20432 from jeremysalwen/more_per_object_retraction ... Enable more retraction settings to be set per-model	2025-08-11 12:27:04 +02:00
Erwan MATHIEU	d5cee01540	Set higher default multi-material precision ... CURA-12584 0.4 is a bit too high, and since the processing has been improved a lot, we can now afford a 0.2	2025-08-08 10:09:15 +02:00
Erwan MATHIEU	fa00082777	Set higher default multi-material resolution ... CURA-12587	2025-08-05 12:54:44 +02:00
Erwan MATHIEU	229d9833e4	Merge remote-tracking branch 'origin/CURA-12543_painting_ux' into CURA-12449_handling-painted-models-map	2025-07-04 15:35:46 +02:00
HellAholic	7a933f755f	Merge branch 'main' into main	2025-06-13 12:42:09 +02:00
Erwan MATHIEU	53b91a7b48	Add setting to keep retracting during travel ... CURA-11978	2025-06-12 16:40:28 +02:00
Erwan MATHIEU	1003d750b9	Merge branch 'main' into CURA-11978_retract-and-unretract-in-a-travel	2025-05-27 08:51:07 +02:00
Erwan MATHIEU	bdc19d39e5	Add settings to setup multi-material painting ... CURA-12449	2025-05-19 10:42:48 +02:00
HellAholic	50a852a373	Merge pull request #20563 from Ultimaker/CURA-12074_introduce-bambu-printers ... CURA-12074 introduce bambu printers	2025-05-02 13:08:46 +02:00
Remco Burema	3fecc27720	Update build-volume fan-speed descriptions. ... part of CURA-12512	2025-04-30 08:09:17 +02:00
Erwan MATHIEU	d1a31b4e5b	Move printer specific settings to global definition ... CURA-12101 There is a specific unit test that disallows custom settings in printer definitions, so this looks like the proper way of doing it. New settings are disabled by default so should be visible only for the printer that explicitly sets them enabled.	2025-04-29 15:45:10 +02:00
Remco Burema	22971f984b	Update description Build _Volume_ Fan. ... 'Build Fan' doesn't make that much sense. done as part of CURA-12512	2025-04-29 13:58:56 +02:00
Remco Burema	eeaadbc071	Add speed settings for auxilary ('build volume') fan. ... Previously you could only set on/off starting on a certain layer. CURA-12512	2025-04-29 13:57:06 +02:00
Erwan MATHIEU	afc22638ba	Use original (refined) build plate setting ... CURA-12099	2025-04-17 11:34:13 +02:00
Erwan MATHIEU	014ed05e73	Basically working A1 mini (multi-color) ... CURA-12074	2025-04-09 12:03:27 +02:00