diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg
index eea25cd005..3293ed6efc 100644
--- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg
@@ -31,7 +31,7 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 19 * layer_height
 cool_min_speed = 10
 support_angle = 65
-material_print_temperature = =default_material_print_temperature
+material_print_temperature = =default_material_print_temperature + 1
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 100
 retraction_extra_prime_amount = 0.1
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg
index e3ec81a05a..6681b202f2 100644
--- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg
@@ -31,8 +31,8 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 cool_min_speed = 10
 support_angle = 60
-material_print_temperature = =default_material_print_temperature + 5
-material_print_temperature_layer_0 = =default_material_print_temperature
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature + 1
 material_flow = 96
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg
index 64332260dc..22be0549f7 100644
--- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg
@@ -31,8 +31,8 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 cool_min_speed = 10
 support_angle = 55
-material_print_temperature = =default_material_print_temperature + 10
-material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature +3
 material_flow = 91
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg
index af9a40ba92..707585110a 100644
--- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg
@@ -31,7 +31,7 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
 cool_min_speed = 10
 support_angle = 55
-material_print_temperature = =default_material_print_temperature
+material_print_temperature = =default_material_print_temperature + 1
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 100
 retraction_extra_prime_amount = 0.1
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg
index 95c98200db..04ecf0726e 100644
--- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg
@@ -31,8 +31,8 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
 cool_min_speed = 10
 support_angle = 50
-material_print_temperature = =default_material_print_temperature + 5
-material_print_temperature_layer_0 = =default_material_print_temperature
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature + 1
 material_flow = 98
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg
index 902ae5cbb2..bd780f69d4 100644
--- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg
@@ -31,8 +31,8 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
 cool_min_speed = 10
 support_angle = 45
-material_print_temperature = =default_material_print_temperature + 10
-material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
 material_flow = 96
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg
index 02b6a0b3a3..1f29bc27c2 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg
@@ -31,7 +31,7 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
 cool_min_speed = 10
 support_angle = 55
-material_print_temperature = =default_material_print_temperature
+material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
 retraction_extra_prime_amount = 0.5
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg
index 1f47f7fd1d..0faf7d8eda 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg
@@ -32,7 +32,7 @@ cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
 cool_min_speed = 10
 support_angle = 50
 material_print_temperature = =default_material_print_temperature + 5
-material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_flow = 96
 retraction_extra_prime_amount = 0.5
 retraction_min_travel = =2*line_width
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg
index 6575d4f85a..f15eb9a2a9 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg
@@ -31,8 +31,8 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
 cool_min_speed = 10
 support_angle = 45
-material_print_temperature = =default_material_print_temperature + 10
-material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_print_temperature = =default_material_print_temperature + 7
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
 material_flow = 95
 retraction_extra_prime_amount = 0.5
 retraction_min_travel = =2*line_width