printer definition update for Alya 3DP, Alya NX 3DP and KUPIDO

resources/quality/alya3dp/alya3dp_flex_normal.inst.cfg

@@ -1,75 +0,0 @@
-[general]
-version = 4
-definition = alya3dp
-name = Flex Normal
-
-[metadata]
-setting_version = 5
-type = quality
-quality_type = alya_normal
-weight = 2
-material = alya_flex
-
-[values]
-adhesion_type = raft
-layer_height_0 = 0.1
-skirt_line_count = 2
-skirt_gap = 2
-fill_outline_gaps = True
-infill_angles = [0,90 ]
-infill_sparse_density = 15
-material_diameter = 1.75
-retraction_min_travel = 0.8
-skin_angles = [0,90]
-top_layers = 6
-wall_line_count = 2
-infill_pattern = grid
-skin_line_width = 0.35
-raft_airgap = 0.18
-raft_base_line_spacing = 1.5
-raft_base_line_width = 0.9
-raft_base_thickness = 0.4
-raft_interface_line_width = 0.4
-raft_interface_thickness = 0.3
-raft_margin = 5
-raft_surface_layers = 3
-raft_surface_line_width = 0.4
-raft_surface_thickness = 0.2
-retract_at_layer_change = true
-retraction_hop = 0.5
-retraction_hop_enabled = true
-support_enable = True
-support_type = everywhere
-support_top_distance = 0.25
-support_z_distance = 0.25
-support_bottom_distance = 0.25
-support_brim_width = 6
-support_infill_rate = 15
-support_line_distance = 1.7
-support_line_width = 0.25
-support_initial_layer_line_distance = 2.7
-support_xy_distance = 0.71
-infill_line_width = 0.4
-line_width = 0.4
-optimize_wall_printing_order = True
-support_angle = 70
-wall_line_width_x = 0.4
-layer_0_z_overlap = 0.0
-speed_print = 20
-speed_topbottom = 15
-speed_wall_0 = 15
-speed_infill = 15
-speed_layer_0 = 15
-speed_support = 15
-speed_support_interface = 15
-speed_travel = 50
-raft_base_speed = 10
-raft_interface_speed = 15
-raft_surface_speed = 15
-raft_base_fan_speed = 0
-raft_interface_fan_speed = 0
-raft_surface_fan_speed = 100
-retraction_amount = 1.5
-retraction_speed = 20.0
-cool_fan_speed = 30
-cool_fan_speed_0 = 30

resources/quality/alya3dp/alya3dp_normal.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Normal
-definition = alya3dp
-
-[metadata]
-setting_version = 5
-type = quality
-quality_type = alya_normal
-weight = 0
-global_quality = True
-
-[values]
-layer_height = 0.16
-layer_height_0 = 0.1

resources/quality/alyanx3dp/alyanx3dp_flex_normal.inst.cfg

@@ -1,75 +0,0 @@
-[general]
-version = 4
-definition = alyanx3dp
-name = Flex Normal
-
-[metadata]
-setting_version = 5
-type = quality
-quality_type = alyanx_normal
-weight = 2
-material = alya_flex
-
-[values]
-adhesion_type = raft
-layer_height_0 = 0.1
-skirt_line_count = 2
-skirt_gap = 2
-fill_outline_gaps = True
-infill_angles = [0,90 ]
-infill_sparse_density = 15
-material_diameter = 1.75
-retraction_min_travel = 0.8
-skin_angles = [0,90]
-top_layers = 6
-wall_line_count = 2
-infill_pattern = grid
-skin_line_width = 0.35
-raft_airgap = 0.18
-raft_base_line_spacing = 1.5
-raft_base_line_width = 0.9
-raft_base_thickness = 0.4
-raft_interface_line_width = 0.4
-raft_interface_thickness = 0.3
-raft_margin = 5
-raft_surface_layers = 3
-raft_surface_line_width = 0.4
-raft_surface_thickness = 0.2
-retract_at_layer_change = true
-retraction_hop = 0.5
-retraction_hop_enabled = true
-support_enable = True
-support_type = everywhere
-support_top_distance = 0.25
-support_z_distance = 0.25
-support_bottom_distance = 0.25
-support_brim_width = 6
-support_infill_rate = 15
-support_line_distance = 1.7
-support_line_width = 0.25
-support_initial_layer_line_distance = 2.7
-support_xy_distance = 0.71
-infill_line_width = 0.4
-line_width = 0.4
-optimize_wall_printing_order = True
-support_angle = 70
-wall_line_width_x = 0.4
-layer_0_z_overlap = 0.0
-speed_print = 20
-speed_topbottom = 15
-speed_wall_0 = 15
-speed_infill = 15
-speed_layer_0 = 15
-speed_support = 15
-speed_support_interface = 15
-speed_travel = 50
-raft_base_speed = 10
-raft_interface_speed = 15
-raft_surface_speed = 15
-raft_base_fan_speed = 0
-raft_interface_fan_speed = 0
-raft_surface_fan_speed = 100
-retraction_amount = 1.5
-retraction_speed = 20.0
-cool_fan_speed = 30
-cool_fan_speed_0 = 30

resources/quality/alyanx3dp/alyanx3dp_generic_pla_normal.inst.cfg

@@ -1,75 +0,0 @@
-[general]
-version = 4
-definition = alyanx3dp
-name = Normal
-
-[metadata]
-setting_version = 6
-type = quality
-quality_type = alyanx_normal
-weight = 2
-material = generic_pla
-
-[values]
-adhesion_type = raft
-layer_height_0 = 0.1
-skirt_line_count = 2
-skirt_gap = 2
-fill_outline_gaps = True
-infill_angles = [0,90 ]
-infill_sparse_density = 15
-material_diameter = 1.75
-retraction_min_travel = 0.8
-skin_angles = [0,90]
-top_layers = 6
-wall_line_count = 2
-infill_pattern = grid
-skin_line_width = 0.35
-raft_airgap = 0.18
-raft_base_line_spacing = 1.5
-raft_base_line_width = 0.9
-raft_base_thickness = 0.4
-raft_interface_line_width = 0.4
-raft_interface_thickness = 0.3
-raft_margin = 5
-raft_surface_layers = 3
-raft_surface_line_width = 0.4
-raft_surface_thickness = 0.2
-retract_at_layer_change = true
-retraction_hop = 0.5
-retraction_hop_enabled = true
-support_enable = True
-support_type = everywhere
-support_top_distance = 0.25
-support_z_distance = 0.25
-support_bottom_distance = 0.25
-support_brim_width = 6
-support_infill_rate = 15
-support_line_distance = 1.7
-support_line_width = 0.25
-support_initial_layer_line_distance = 2.7
-support_xy_distance = 0.71
-infill_line_width = 0.4
-line_width = 0.4
-optimize_wall_printing_order = True
-support_angle = 70
-wall_line_width_x = 0.4
-layer_0_z_overlap = 0.0
-speed_print = 40
-speed_topbottom = 30
-speed_wall_0 = 35
-speed_infill = 45
-speed_layer_0 = 25
-speed_support = 45
-speed_support_interface = 35
-speed_travel = 60
-raft_base_speed        = 15
-raft_interface_speed   = 20
-raft_surface_speed     = 35
-raft_surface_fan_speed = 100
-raft_base_fan_speed    = 0
-raft_interface_fan_speed = 0
-retraction_amount = 1.5
-retraction_speed = 40.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 100

resources/quality/alyanx3dp/alyanx3dp_normal.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Normal
-definition = alyanx3dp
-
-[metadata]
-setting_version = 5
-type = quality
-quality_type = alyanx_normal
-weight = 0
-global_quality = True
-
-[values]
-layer_height = 0.16
-layer_height_0 = 0.1

resources/quality/katihal/alya3dp_normal.inst.cfg

@@ -1,36 +1,36 @@
 [general]
 version = 4
-definition = alya3dp
 name = Normal
+definition = alya3dp
 
 [metadata]
 setting_version = 5
 type = quality
 quality_type = alya_normal
-weight = 2
-material = alya_pla
+weight = 0
+global_quality = True
 
 [values]
-adhesion_type = raft
+layer_height = 0.16
 layer_height_0 = 0.1
+adhesion_type = raft
 skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_angles = [0,90 ]
 infill_sparse_density = 15
-material_diameter = 1.75
 retraction_min_travel = 0.8
 skin_angles = [0,90]
 top_layers = 6
 wall_line_count = 2
 infill_pattern = grid
-skin_line_width = 0.35
-raft_airgap = 0.18
-raft_base_line_spacing = 1.5
-raft_base_line_width = 0.9
-raft_base_thickness = 0.4
+skin_line_width = 0.4
+raft_base_line_spacing = 2.6
+raft_base_line_width = 1.2
+raft_base_thickness = 0.3
 raft_interface_line_width = 0.4
 raft_interface_thickness = 0.3
+raft_interface_line_spacing = 0.8
 raft_margin = 5
 raft_surface_layers = 3
 raft_surface_line_width = 0.4
@@ -38,38 +38,20 @@ raft_surface_thickness = 0.2
 retract_at_layer_change = true
 retraction_hop = 0.5
 retraction_hop_enabled = true
-support_enable = True
 support_type = everywhere
-support_top_distance = 0.25
+support_interface_pattern =lines
+support_top_distance = 0.15
 support_z_distance = 0.25
-support_bottom_distance = 0.25
+support_bottom_distance = 0.15
 support_brim_width = 6
 support_infill_rate = 15
 support_line_distance = 1.7
 support_line_width = 0.25
 support_initial_layer_line_distance = 2.7
-support_xy_distance = 0.71
+support_xy_distance = 0.7
 infill_line_width = 0.4
 line_width = 0.4
 optimize_wall_printing_order = True
 support_angle = 70
 wall_line_width_x = 0.4
-layer_0_z_overlap = 0.0
-speed_print = 40
-speed_topbottom = 30
-speed_wall_0 = 35
-speed_infill = 45
-speed_layer_0 = 25
-speed_support = 45
-speed_support_interface = 35
-speed_travel = 60
-raft_base_speed        = 15
-raft_interface_speed   = 20
-raft_surface_speed     = 35
-raft_surface_fan_speed = 100
-raft_base_fan_speed    = 0
-raft_interface_fan_speed = 0
-retraction_amount = 1.5
-retraction_speed = 40.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 100
+wall_line_width_0 = 0.35

resources/quality/katihal/alya3dp_normal_flex.inst.cfg

@@ -0,0 +1,34 @@
+[general]
+version = 4
+definition = alya3dp
+name = Flex Normal
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = alya_normal
+weight = 2
+material = alya_flex
+
+[values]
+material_diameter = 1.75
+speed_print = 20
+speed_topbottom = 15
+speed_wall_0 = 15
+speed_infill = 15
+speed_layer_0 = 15
+speed_support = 15
+speed_support_interface = 15
+speed_travel = 50
+raft_airgap = 0.15
+layer_0_z_overlap = 0.04
+raft_base_speed = 10
+raft_interface_speed = 15
+raft_surface_speed = 15
+raft_base_fan_speed = 0
+raft_interface_fan_speed = 0
+raft_surface_fan_speed = 100
+retraction_amount = 1.5
+retraction_speed = 20.0
+cool_fan_speed = 30
+cool_fan_speed_0 = 30

resources/quality/katihal/alya3dp_normal_generic_pla.inst.cfg

@@ -0,0 +1,32 @@
+[general]
+version = 4
+definition = alya3dp
+name = Normal
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = alya_normal
+weight = 3
+material = generic_pla
+
+[values]
+material_diameter = 1.75
+speed_print = 40
+speed_topbottom = 30
+speed_wall_0 = 35
+speed_infill = 45
+speed_layer_0 = 25
+speed_support = 45
+speed_support_interface = 35
+speed_travel = 60
+raft_airgap = 0.15
+layer_0_z_overlap = 0.04
+raft_base_speed        = 15
+raft_interface_speed   = 20
+raft_surface_speed     = 35
+raft_surface_fan_speed = 100
+raft_base_fan_speed    = 0
+raft_interface_fan_speed = 0
+cool_fan_speed = 100
+cool_fan_speed_0 = 100

resources/quality/katihal/alyanx3dp_normal.inst.cfg

@@ -1,36 +1,36 @@
 [general]
 version = 4
-definition = alyanx3dp
 name = Normal
+definition = alyanx3dp
 
 [metadata]
 setting_version = 5
 type = quality
 quality_type = alyanx_normal
-weight = 2
-material = alya_pla
+weight = 0
+global_quality = True
 
 [values]
-adhesion_type = raft
+layer_height = 0.16
 layer_height_0 = 0.1
+adhesion_type = raft
 skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_angles = [0,90 ]
 infill_sparse_density = 15
-material_diameter = 1.75
 retraction_min_travel = 0.8
 skin_angles = [0,90]
 top_layers = 6
 wall_line_count = 2
 infill_pattern = grid
-skin_line_width = 0.35
-raft_airgap = 0.18
-raft_base_line_spacing = 1.5
-raft_base_line_width = 0.9
-raft_base_thickness = 0.4
+skin_line_width = 0.4
+raft_base_line_spacing = 2.6
+raft_base_line_width = 1.2
+raft_base_thickness = 0.3
 raft_interface_line_width = 0.4
 raft_interface_thickness = 0.3
+raft_interface_line_spacing = 0.8
 raft_margin = 5
 raft_surface_layers = 3
 raft_surface_line_width = 0.4
@@ -38,38 +38,20 @@ raft_surface_thickness = 0.2
 retract_at_layer_change = true
 retraction_hop = 0.5
 retraction_hop_enabled = true
-support_enable = True
 support_type = everywhere
-support_top_distance = 0.25
+support_interface_pattern =lines
+support_top_distance = 0.15
 support_z_distance = 0.25
-support_bottom_distance = 0.25
+support_bottom_distance = 0.15
 support_brim_width = 6
 support_infill_rate = 15
 support_line_distance = 1.7
 support_line_width = 0.25
 support_initial_layer_line_distance = 2.7
-support_xy_distance = 0.71
+support_xy_distance = 0.7
 infill_line_width = 0.4
 line_width = 0.4
 optimize_wall_printing_order = True
 support_angle = 70
 wall_line_width_x = 0.4
-layer_0_z_overlap = 0.0
-speed_print = 40
-speed_topbottom = 30
-speed_wall_0 = 35
-speed_infill = 45
-speed_layer_0 = 25
-speed_support = 45
-speed_support_interface = 35
-speed_travel = 60
-raft_base_speed        = 15
-raft_interface_speed   = 20
-raft_surface_speed     = 35
-raft_surface_fan_speed = 100
-raft_base_fan_speed    = 0
-raft_interface_fan_speed = 0
-retraction_amount = 1.5
-retraction_speed = 40
-cool_fan_speed = 100
-cool_fan_speed_0 = 100
+wall_line_width_0 = 0.35

resources/quality/katihal/alyanx3dp_normal_flex.inst.cfg

@@ -0,0 +1,34 @@
+[general]
+version = 4
+definition = alyanx3dp
+name = Flex Normal
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = alyanx_normal
+weight = 2
+material = alya_flex
+
+[values]
+material_diameter = 1.75
+speed_print = 20
+speed_topbottom = 15
+speed_wall_0 = 15
+speed_infill = 15
+speed_layer_0 = 15
+speed_support = 15
+speed_support_interface = 15
+speed_travel = 50
+raft_airgap = 0.15
+layer_0_z_overlap = 0.0
+raft_base_speed = 10
+raft_interface_speed = 15
+raft_surface_speed = 15
+raft_base_fan_speed = 0
+raft_interface_fan_speed = 0
+raft_surface_fan_speed = 100
+retraction_amount = 1.5
+retraction_speed = 20.0
+cool_fan_speed = 30
+cool_fan_speed_0 = 30

resources/quality/katihal/alyanx3dp_normal_generic_pla.inst.cfg

@@ -0,0 +1,32 @@
+[general]
+version = 4
+definition = alyanx3dp
+name = Normal
+
+[metadata]
+setting_version = 6
+type = quality
+quality_type = alyanx_normal
+weight = 2
+material = generic_pla
+
+[values]
+material_diameter = 1.75
+speed_print = 40
+speed_topbottom = 30
+speed_wall_0 = 35
+speed_infill = 45
+speed_layer_0 = 25
+speed_support = 45
+speed_support_interface = 35
+speed_travel = 60
+raft_airgap = 0.15
+layer_0_z_overlap = 0.04
+raft_base_speed        = 15
+raft_interface_speed   = 20
+raft_surface_speed     = 35
+raft_surface_fan_speed = 100
+raft_base_fan_speed    = 0
+raft_interface_fan_speed = 0
+cool_fan_speed = 100
+cool_fan_speed_0 = 100

resources/quality/katihal/kupido_normal.inst.cfg

@@ -1,36 +1,36 @@
 [general]
 version = 4
-definition = alya3dp
 name = Normal
+definition = kupido
 
 [metadata]
 setting_version = 5
 type = quality
-quality_type = alya_normal
-weight = 3
-material = generic_pla
+quality_type = kupido_normal
+weight = 0
+global_quality = True
 
 [values]
-adhesion_type = raft
+layer_height = 0.16
 layer_height_0 = 0.1
+adhesion_type = raft
 skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_angles = [0,90 ]
 infill_sparse_density = 15
-material_diameter = 1.75
 retraction_min_travel = 0.8
 skin_angles = [0,90]
 top_layers = 6
 wall_line_count = 2
 infill_pattern = grid
-skin_line_width = 0.35
-raft_airgap = 0.18
-raft_base_line_spacing = 1.5
-raft_base_line_width = 0.9
-raft_base_thickness = 0.4
+skin_line_width = 0.4
+raft_base_line_spacing = 2.6
+raft_base_line_width = 1.2
+raft_base_thickness = 0.3
 raft_interface_line_width = 0.4
 raft_interface_thickness = 0.3
+raft_interface_line_spacing = 0.8
 raft_margin = 5
 raft_surface_layers = 3
 raft_surface_line_width = 0.4
@@ -38,38 +38,20 @@ raft_surface_thickness = 0.2
 retract_at_layer_change = true
 retraction_hop = 0.5
 retraction_hop_enabled = true
-support_enable = True
 support_type = everywhere
-support_top_distance = 0.25
+support_interface_pattern =lines
+support_top_distance = 0.15
 support_z_distance = 0.25
-support_bottom_distance = 0.25
+support_bottom_distance = 0.15
 support_brim_width = 6
 support_infill_rate = 15
 support_line_distance = 1.7
 support_line_width = 0.25
 support_initial_layer_line_distance = 2.7
-support_xy_distance = 0.71
+support_xy_distance = 0.7
 infill_line_width = 0.4
 line_width = 0.4
 optimize_wall_printing_order = True
 support_angle = 70
 wall_line_width_x = 0.4
-layer_0_z_overlap = 0.0
-speed_print = 40
-speed_topbottom = 30
-speed_wall_0 = 35
-speed_infill = 45
-speed_layer_0 = 25
-speed_support = 45
-speed_support_interface = 35
-speed_travel = 60
-raft_base_speed        = 15
-raft_interface_speed   = 20
-raft_surface_speed     = 35
-raft_surface_fan_speed = 100
-raft_base_fan_speed    = 0
-raft_interface_fan_speed = 0
-retraction_amount = 1.5
-retraction_speed = 40.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 100
+wall_line_width_0 = 0.35

resources/quality/katihal/kupido_normal_generic_abs.inst.cfg

@@ -0,0 +1,32 @@
+[general]
+version = 4
+definition = kupido
+name = Normal
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = kupido_normal
+weight = 3
+material = generic_abs
+
+[values]
+material_diameter = 1.75
+speed_print = 40
+speed_topbottom = 30
+speed_wall_0 = 35
+speed_infill = 45
+speed_layer_0 = 25
+speed_support = 45
+speed_support_interface = 35
+speed_travel = 60
+raft_airgap = 0.1
+layer_0_z_overlap = 0.04
+raft_base_speed        = 15
+raft_interface_speed   = 20
+raft_surface_speed     = 35
+raft_surface_fan_speed = 100
+raft_base_fan_speed    = 0
+raft_interface_fan_speed = 0
+cool_fan_speed = 30
+cool_fan_speed_0 = 30

resources/quality/katihal/kupido_normal_generic_pla.inst.cfg

@@ -0,0 +1,32 @@
+[general]
+version = 4
+definition = kupido
+name = Normal
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = kupido_normal
+weight = 3
+material = generic_pla
+
+[values]
+material_diameter = 1.75
+speed_print = 40
+speed_topbottom = 30
+speed_wall_0 = 35
+speed_infill = 45
+speed_layer_0 = 25
+speed_support = 45
+speed_support_interface = 35
+speed_travel = 60
+raft_airgap = 0.15
+layer_0_z_overlap = 0.04
+raft_base_speed        = 15
+raft_interface_speed   = 20
+raft_surface_speed     = 35
+raft_surface_fan_speed = 100
+raft_base_fan_speed    = 0
+raft_interface_fan_speed = 0
+cool_fan_speed = 100
+cool_fan_speed_0 = 100