Merge pull request #7136 from hussainsail2002/master

Adding Fabx Pro Machine

resources/definitions/fabxpro.def.json

@@ -0,0 +1,58 @@
+{
+    "version": 2,
+    "name": "FabX Pro",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "FabX",
+        "manufacturer": "FabX",
+        "file_formats": "text/x-gcode",
+        "platform": "fabxpro_platform.STL",
+        "has_materials": true,
+        "has_machine_quality": true,
+        "machine_extruder_trains":
+        {
+            "0": "fabxpro_extruder_0"
+        }
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "FabX Pro" },
+        "machine_width": {
+            "default_value": 170
+        },
+        "machine_height": {
+            "default_value": 170
+        },
+        "machine_depth": {
+            "default_value": 170
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+	"machine_heated_bed": {
+	    "default_value": true
+	},
+        "machine_head_with_fans_polygon":
+        {
+            "default_value": [
+                [ -75, 35 ],
+                [ -75, -18 ],
+                [ 18, 35 ],
+                [ 18, -18 ]
+            ]
+        },
+        "gantry_height": {
+            "value": "55"
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap (Marlin/Sprinter)"
+        },
+        "machine_start_gcode": {
+            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
+        },
+        "machine_end_gcode": {
+            "value": "'M104 S0 ;extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning'"
+        }
+    }
+}

resources/extruders/fabxpro_extruder_0.def.json

@@ -0,0 +1,15 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "fabxpro",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}

resources/quality/fabxpro/fabxpro_abs_draft.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Draft 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Draft
+weight = -2
+material = redd_abs
+global_quality = True
+
+
+[values]
+layer_height = 0.3
+layer_height_0 = 0.35
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_abs_fine.inst.cfg

@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Fine 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Fine 
+weight = -2
+material = redd_abs
+global_quality = True
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.15
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_abs_normal.inst.cfg

@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Normal 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Normal 
+weight = -2
+material = redd_abs
+global_quality = True
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.3
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_asa_draft.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Draft 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Draft 
+weight = -2
+material = redd_asa
+global_quality = True
+
+
+[values]
+layer_height = 0.3
+layer_height_0 = 0.35
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_asa_fine.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Fine 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Fine 
+weight = -2
+material = redd_asa
+global_quality = True
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.15
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85
+

resources/quality/fabxpro/fabxpro_asa_normal.inst.cfg

@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Normal 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Normal 
+weight = -2
+material = redd_asa
+global_quality = True
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.3
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_hips_draft.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Draft 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Draft 
+weight = -2
+material = redd_hips
+global_quality = True
+
+
+[values]
+layer_height = 0.3
+layer_height_0 = 0.35
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_hips_fine.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Fine 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Fine 
+weight = -2
+material = redd_hips
+global_quality = True
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.15
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85
+

resources/quality/fabxpro/fabxpro_hips_normal.inst.cfg

@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Normal 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Normal 
+weight = -2
+material = redd_hips
+global_quality = True
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.3
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_nylon_draft.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Draft 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Draft 
+weight = -2
+material = redd_nylon
+global_quality = True
+
+
+[values]
+layer_height = 0.3
+layer_height_0 = 0.35
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_nylon_fine.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Fine
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Fine 
+weight = -2
+material = redd_nylon
+global_quality = True
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.15
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85
+

resources/quality/fabxpro/fabxpro_nylon_normal.inst.cfg

@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Normal 	
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Normal 
+weight = -2
+material = redd_nylon
+global_quality = True
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.3
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_petg_draft.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Draft 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Draft 
+weight = -2
+material = redd_petg
+global_quality = True
+
+
+[values]
+layer_height = 0.3
+layer_height_0 = 0.35
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_petg_fine.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Fine 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Fine 
+weight = -2
+material = redd_petg
+global_quality = True
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.15
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85
+

resources/quality/fabxpro/fabxpro_petg_normal.inst.cfg

@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Normal 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Normal 
+weight = -2
+material = redd_petg
+global_quality = True
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.3
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_pla_draft.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Draft 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Draft 
+weight = -2
+material = redd_pla
+global_quality = True
+
+[values]
+layer_height = 0.3
+layer_height_0 = 0.35
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = skirt
+cool_fan_enabled = true
+cool_fan_speed = 100
+cool_fan_full_at_height = 0.6
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_pla_fine.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Fine 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Fine 
+weight = -2
+material = redd_pla
+global_quality = True
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.15
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = skirt
+cool_fan_enabled = true
+cool_fan_speed = 100
+cool_fan_full_at_height = 0.6
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_pla_normal.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Normal 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Normal 
+weight = -2
+material = redd_pla
+global_quality = True
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.3
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 55
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = skirt
+cool_fan_enabled = true
+cool_fan_speed = 100
+cool_fan_full_at_height = 0.6
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_tpe_draft.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Draft 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Draft 
+weight = -2
+material = redd_tpe
+global_quality = True
+
+
+[values]
+layer_height = 0.3
+layer_height_0 = 0.35
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 35
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85

resources/quality/fabxpro/fabxpro_tpe_fine.inst.cfg

@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Fine 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Fine 
+weight = -2
+material = redd_tpe
+global_quality = True
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.15
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 35
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85
+

resources/quality/fabxpro/fabxpro_tpe_normal.inst.cfg

@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Normal 
+definition = fabxpro
+
+[metadata]
+setting_version = 11
+type = quality
+quality_type = Normal 
+weight = -2
+material = redd_tpe
+global_quality = True
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.3
+initial_layer_line_width_factor = 150
+infill_before_walls = False
+speed_print = 35
+speed_travel = 70
+retraction_amount = 1
+retraction_speed = 40
+adhesion_type = raft
+raft_margin = 5
+raft_airgap = 0.35
+raft_surface_layers = 1
+raft_surface_thickness = 0.1
+raft_surface_line_spacing = 0.6
+raft_base_thickness = 0.6
+cool_fan_enabled = False
+support_enable = True
+support_pattern = lines
+support_infill_rate = 15
+support_z_distance = 0.15
+support_xy_distance = 0.85