From fdd1cef11a28d9e8540ec07e356d747c2f3fba81 Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Wed, 18 Mar 2020 15:50:27 +0100 Subject: [PATCH] Reduce stair step height to 0 for PVA Given that: * stair stepping is intended to be used to reduce the adhesion between support and the model, where the support rests on the model, and to reduce scarring, and * PVA doesn't suffer from scarring or adhesion issues due to its water-solubility, and * our current stair stepping algorithm has some bugs, causing support to disappear sometimes we've decided to set stair stepping to 0 for all PVA profiles for UM3, UMS5 and UMS3. Contributes to issue CURA-7311. --- resources/variants/ultimaker3_bb0.8.inst.cfg | 2 +- resources/variants/ultimaker3_bb04.inst.cfg | 2 +- resources/variants/ultimaker3_extended_bb0.8.inst.cfg | 2 +- resources/variants/ultimaker3_extended_bb04.inst.cfg | 2 +- resources/variants/ultimaker_s3_bb0.8.inst.cfg | 2 +- resources/variants/ultimaker_s3_bb04.inst.cfg | 2 +- resources/variants/ultimaker_s5_bb0.8.inst.cfg | 2 +- resources/variants/ultimaker_s5_bb04.inst.cfg | 2 +- 8 files changed, 8 insertions(+), 8 deletions(-) diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index 400e4d092c..d27c78425b 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -70,7 +70,7 @@ speed_wall_0 = =math.ceil(speed_wall * 25 / 30) support_angle = 60 support_bottom_height = =layer_height * 2 support_bottom_pattern = zigzag -support_bottom_stair_step_height = =layer_height +support_bottom_stair_step_height = 0 support_infill_rate = 50 support_infill_sparse_thickness = 0.4 support_interface_enable = True diff --git a/resources/variants/ultimaker3_bb04.inst.cfg b/resources/variants/ultimaker3_bb04.inst.cfg index 01d465fe6a..e6706ecc6f 100644 --- a/resources/variants/ultimaker3_bb04.inst.cfg +++ b/resources/variants/ultimaker3_bb04.inst.cfg @@ -37,7 +37,7 @@ speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) support_bottom_height = =layer_height * 2 support_bottom_pattern = zigzag -support_bottom_stair_step_height = =layer_height +support_bottom_stair_step_height = 0 support_infill_rate = 50 support_infill_sparse_thickness = 0.2 support_interface_enable = True diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index 4a3f3e371f..87ca9ba34d 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -70,7 +70,7 @@ speed_wall_0 = =math.ceil(speed_wall * 25 / 30) support_angle = 60 support_bottom_height = =layer_height * 2 support_bottom_pattern = zigzag -support_bottom_stair_step_height = =layer_height +support_bottom_stair_step_height = 0 support_infill_rate = 50 support_infill_sparse_thickness = 0.4 support_interface_enable = True diff --git a/resources/variants/ultimaker3_extended_bb04.inst.cfg b/resources/variants/ultimaker3_extended_bb04.inst.cfg index a8d706d2e4..9a3dbe8455 100644 --- a/resources/variants/ultimaker3_extended_bb04.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb04.inst.cfg @@ -37,7 +37,7 @@ speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) support_bottom_height = =layer_height * 2 support_bottom_pattern = zigzag -support_bottom_stair_step_height = =layer_height +support_bottom_stair_step_height = 0 support_infill_rate = 50 support_infill_sparse_thickness = 0.2 support_interface_enable = True diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index 5c1e9c449e..b234a132fa 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -70,7 +70,7 @@ speed_prime_tower = =math.ceil(speed_print * 7 / 35) support_angle = 60 support_bottom_height = =layer_height * 2 support_bottom_pattern = zigzag -support_bottom_stair_step_height = =layer_height +support_bottom_stair_step_height = 0 support_infill_rate = 50 support_infill_sparse_thickness = 0.4 support_interface_enable = True diff --git a/resources/variants/ultimaker_s3_bb04.inst.cfg b/resources/variants/ultimaker_s3_bb04.inst.cfg index 7c37ffaa76..384b7d3d62 100644 --- a/resources/variants/ultimaker_s3_bb04.inst.cfg +++ b/resources/variants/ultimaker_s3_bb04.inst.cfg @@ -37,7 +37,7 @@ speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) support_bottom_height = =layer_height * 2 support_bottom_pattern = zigzag -support_bottom_stair_step_height = =layer_height +support_bottom_stair_step_height = 0 support_infill_rate = 50 support_infill_sparse_thickness = 0.2 support_interface_enable = True diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index f393da7ff3..400d74752c 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -70,7 +70,7 @@ speed_prime_tower = =math.ceil(speed_print * 7 / 35) support_angle = 60 support_bottom_height = =layer_height * 2 support_bottom_pattern = zigzag -support_bottom_stair_step_height = =layer_height +support_bottom_stair_step_height = 0 support_infill_rate = 50 support_infill_sparse_thickness = 0.4 support_interface_enable = True diff --git a/resources/variants/ultimaker_s5_bb04.inst.cfg b/resources/variants/ultimaker_s5_bb04.inst.cfg index 7b3634a923..6a503177af 100644 --- a/resources/variants/ultimaker_s5_bb04.inst.cfg +++ b/resources/variants/ultimaker_s5_bb04.inst.cfg @@ -37,7 +37,7 @@ speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) support_bottom_height = =layer_height * 2 support_bottom_pattern = zigzag -support_bottom_stair_step_height = =layer_height +support_bottom_stair_step_height = 0 support_infill_rate = 50 support_infill_sparse_thickness = 0.2 support_interface_enable = True