Cleaned up of the support settings for the UM2+ quality modes.

Relates to PP-108

resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg

@@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 25)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.5

resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg

@@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 35)
 speed_wall_x = =math.ceil(speed_print * 30 / 35)
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.5

resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg

@@ -37,9 +37,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 25)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 2.85
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = 0.22
 top_bottom_thickness = 0.75

resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg

@@ -37,9 +37,5 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 35)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 2.85
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = 0.22
 top_bottom_thickness = 0.75

resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg

@@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 25)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.2

resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg

@@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.2

resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg

@@ -35,9 +35,6 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 20 / 40)
 speed_wall_x = =speed_print
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 40 / 40)

resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg

@@ -35,8 +35,5 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 20 / 40)
 speed_wall_x = =speed_print
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2

resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg

@@ -34,9 +34,6 @@ speed_travel = 150
 speed_wall = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 0.75
 speed_wall_0 = =math.ceil(speed_print * 30 / 45)

resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg

@@ -33,8 +33,5 @@ speed_travel = 150
 speed_wall = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 0.75

resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg

@@ -38,10 +38,7 @@ speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
 support_bottom_distance = 0.55
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
 support_top_distance = 0.55
-support_xy_distance = 0.7
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 55 / 55)

resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg

@@ -37,8 +37,5 @@ speed_wall_0 = =math.ceil(speed_print * 15 / 55)
 speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_xy_distance = 0.7
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2

resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg

@@ -37,9 +37,6 @@ speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
 support_bottom_distance = 0.65
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
 support_top_distance = 0.5
-support_xy_distance = 0.75
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2

resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg

@@ -37,9 +37,6 @@ speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
 support_bottom_distance = 0.65
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
 support_top_distance = 0.5
-support_xy_distance = 0.75
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2

resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg

@@ -31,8 +31,6 @@ raft_surface_line_width = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
 speed_topbottom = =math.ceil(speed_print * 15 / 30)
 speed_infill = =math.ceil(speed_print * 80 / 30)

resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg

@@ -31,6 +31,4 @@ raft_surface_line_width = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19

resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg

@@ -32,8 +32,6 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 45)
 speed_wall_x = =math.ceil(speed_print * 30 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_infill = =math.ceil(speed_print * 45 / 45)

resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg

@@ -32,6 +32,4 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 45)
 speed_wall_x = =math.ceil(speed_print * 30 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19

resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg

@@ -36,9 +36,6 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 3.5333
-support_pattern = lines
 support_z_distance = 0.21
 top_bottom_thickness = 0.75
 speed_infill = =math.ceil(speed_print * 45 / 45)

resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg

@@ -36,8 +36,5 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 3.5333
-support_pattern = lines
 support_z_distance = 0.21
 top_bottom_thickness = 0.75

resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg

@@ -31,7 +31,5 @@ speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 2.0

resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg

@@ -31,7 +31,5 @@ speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
 support_enable = True
-support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.2

resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg

@@ -58,7 +58,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 travel_avoid_distance = 3

resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg

@@ -49,7 +49,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 travel_avoid_distance = 3

resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg

@@ -57,7 +57,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.1

resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg

@@ -48,7 +48,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.5

resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg

@@ -57,7 +57,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.5

resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg

@@ -36,8 +36,6 @@ speed_wall_0 = =math.ceil(speed_print * 15 / 40)
 speed_wall_x = =math.ceil(speed_print * 38 / 40)
 support_angle = 45
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 40 / 40)

resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg

@@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 40)
 speed_wall_x = =math.ceil(speed_print * 35 / 40)
 support_angle = 45
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_xy_distance = 0.65
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2

resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg

@@ -37,8 +37,6 @@ speed_wall_0 = =math.ceil(speed_print * 15 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =25 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 25
-support_xy_distance = 0.7
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 45 / 45)