Apply printer-linter format

resources/definitions/ankermake_m5.def.json

@@ -120,7 +120,12 @@
         "support_z_distance": { "value": "layer_height * 2" },
         "top_bottom_thickness": { "value": "layer_height * 4" },
         "wall_overhang_angle": { "value": 55 },
-        "wall_overhang_speed_factors": { "value": [55] },
+        "wall_overhang_speed_factors":
+        {
+            "value": [
+                55
+            ]
+        },
         "zig_zaggify_infill": { "value": "infill_pattern == 'cross' or infill_pattern == 'cross_3d' or infill_pattern == 'lines'" }
     }
 }

resources/definitions/ankermake_m5c.def.json

@@ -238,7 +238,12 @@
         "wall_extruder_nr": { "value": -1 },
         "wall_line_width_0": { "value": 0.44 },
         "wall_overhang_angle": { "value": 45 },
-        "wall_overhang_speed_factors": { "value": [40] },
+        "wall_overhang_speed_factors":
+        {
+            "value": [
+                40
+            ]
+        },
         "wall_thickness": { "value": 0.84 },
         "wall_x_extruder_nr": { "value": -1 },
         "zig_zaggify_infill": { "value": true }

resources/definitions/atmat_signal_pro_base.def.json

@@ -167,7 +167,12 @@
         "travel_avoid_supports": { "value": "True" },
         "wall_line_width": { "value": "machine_nozzle_size" },
         "wall_overhang_angle": { "value": "75" },
-        "wall_overhang_speed_factors": { "value": [50] },
+        "wall_overhang_speed_factors":
+        {
+            "value": [
+                50
+            ]
+        },
         "zig_zaggify_infill": { "value": "True" }
     }
 }

resources/definitions/gutenberg_base.def.json

@@ -109,7 +109,12 @@
         "travel_avoid_other_parts": { "default_value": false },
         "wall_line_width": { "value": "machine_nozzle_size" },
         "wall_overhang_angle": { "default_value": 75 },
-        "wall_overhang_speed_factors": { "default_value": [50] },
+        "wall_overhang_speed_factors":
+        {
+            "default_value": [
+                50
+            ]
+        },
         "zig_zaggify_infill": { "value": true }
     }
 }

resources/definitions/lotmaxx_sc60.def.json

@@ -61,7 +61,12 @@
         "support_pattern": { "default_value": "lines" },
         "switch_extruder_retraction_amount": { "value": 100 },
         "switch_extruder_retraction_speeds": { "value": 60 },
-        "wall_overhang_speed_factors": { "value": [50] },
+        "wall_overhang_speed_factors":
+        {
+            "value": [
+                50
+            ]
+        },
         "z_seam_corner": { "default_value": "z_seam_corner_any" },
         "z_seam_relative": { "value": true },
         "z_seam_type": { "default_value": "sharpest_corner" },

resources/definitions/snakeoil_standard_base.def.json

@@ -109,7 +109,12 @@
         "travel_avoid_other_parts": { "default_value": false },
         "wall_line_width": { "value": "machine_nozzle_size" },
         "wall_overhang_angle": { "default_value": 75 },
-        "wall_overhang_speed_factors": { "default_value": [50] },
+        "wall_overhang_speed_factors":
+        {
+            "default_value": [
+                50
+            ]
+        },
         "zig_zaggify_infill": { "value": true }
     }
 }

resources/definitions/ultimaker_sketch_sprint.def.json

@@ -383,7 +383,9 @@
         "wall_overhang_speed_factors":
         {
             "minimum_value_warning": 15,
-            "value": [18]
+            "value": [
+                18
+            ]
         },
         "wall_thickness": { "value": 1 },
         "wall_x_material_flow_layer_0": { "value": "material_flow" },

resources/definitions/voron2_base.def.json

@@ -119,7 +119,12 @@
         "travel_avoid_other_parts": { "default_value": false },
         "wall_line_width": { "value": "machine_nozzle_size" },
         "wall_overhang_angle": { "default_value": 75 },
-        "wall_overhang_speed_factors": { "default_value": [50] },
+        "wall_overhang_speed_factors":
+        {
+            "default_value": [
+                50
+            ]
+        },
         "zig_zaggify_infill": { "value": true }
     }
 }

resources/definitions/vzbot_base.def.json

@@ -195,7 +195,12 @@
         "travel_avoid_other_parts": { "default_value": false },
         "wall_line_width": { "value": "machine_nozzle_size" },
         "wall_overhang_angle": { "default_value": 75 },
-        "wall_overhang_speed_factors": { "default_value": [50] },
+        "wall_overhang_speed_factors":
+        {
+            "default_value": [
+                50
+            ]
+        },
         "xy_offset_layer_0": { "value": -0.3 },
         "z_seam_type": { "value": "'back'" },
         "zig_zaggify_infill": { "value": true }