diff --git a/plugins/VersionUpgrade/VersionUpgrade49to50/VersionUpgrade49to50.py b/plugins/VersionUpgrade/VersionUpgrade49to50/VersionUpgrade49to50.py index 5e311f49e7..0cdeddf216 100644 --- a/plugins/VersionUpgrade/VersionUpgrade49to50/VersionUpgrade49to50.py +++ b/plugins/VersionUpgrade/VersionUpgrade49to50/VersionUpgrade49to50.py @@ -12,7 +12,9 @@ _removed_settings = { "travel_compensate_overlapping_walls_x_enabled", "fill_perimeter_gaps", "wall_min_flow", - "wall_min_flow_retract" + "wall_min_flow_retract", + "speed_equalize_flow_enabled", + "speed_equalize_flow_min" } diff --git a/resources/definitions/erzay3d.def.json b/resources/definitions/erzay3d.def.json index 2904b9ecfa..dc1ad9a509 100644 --- a/resources/definitions/erzay3d.def.json +++ b/resources/definitions/erzay3d.def.json @@ -62,8 +62,6 @@ "retraction_amount": { "default_value": 6.5 }, "speed_print": { "default_value": 40 }, - "speed_equalize_flow_enabled": { "default_value": true }, - "speed_equalize_flow_max": { "default_value": 100 }, "acceleration_print": { "default_value": 1000 }, diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 40ff57f234..daf2c4cd89 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -3111,26 +3111,15 @@ "settable_per_mesh": false, "settable_per_extruder": false }, - "speed_equalize_flow_enabled": + "speed_equalize_flow_width_factor": { - "label": "Equalize Filament Flow", - "description": "Print thinner than normal lines faster so that the amount of material extruded per second remains the same. Thin pieces in your model might require lines printed with smaller line width than provided in the settings. This setting controls the speed changes for such lines.", - "type": "bool", - "default_value": false, - "settable_per_mesh": false, - "settable_per_extruder": true - }, - "speed_equalize_flow_max": - { - "label": "Maximum Speed for Flow Equalization", - "description": "Maximum print speed when adjusting the print speed in order to equalize flow.", + "label": "Flow Equalization Width Factor", + "description": "Extrusion width based correction factor on the equalized flow. The target flow (in mm³/s) is reduced by the percentual difference in line width multiplied by this factor. A factor above zero means that thin lines are adjusted to be even faster than simple flow equalization would speed them up to. Conversely, wider lines are slowed down more. A positive value can help to compensate for the width depended back pressure the previous layer exterts on the line.", "type": "float", - "unit": "mm/s", - "enabled": "speed_equalize_flow_enabled", - "default_value": 150, - "minimum_value": "0.1", - "maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2)", - "maximum_value_warning": "150", + "unit": "mm³/s", + "default_value": 0.0, + "minimum_value_warning": "0.0", + "maximum_value_warning": "3.0", "settable_per_mesh": false, "settable_per_extruder": true }, diff --git a/resources/definitions/fusedform_base.def.json b/resources/definitions/fusedform_base.def.json index 24b841f704..1777b93913 100644 --- a/resources/definitions/fusedform_base.def.json +++ b/resources/definitions/fusedform_base.def.json @@ -48,7 +48,6 @@ "speed_topbottom": {"value": 40 }, "speed_wall": { "value": 35 }, "speed_wall_x": { "value": 40 }, - "speed_equalize_flow_max": { "value": 70 }, "retraction_enable": {"default_value":true}, "retraction_amount": { "default_value": 4 }, diff --git a/resources/definitions/fusedform_doppia_base.def.json b/resources/definitions/fusedform_doppia_base.def.json index ddee568e28..add20dfc77 100644 --- a/resources/definitions/fusedform_doppia_base.def.json +++ b/resources/definitions/fusedform_doppia_base.def.json @@ -48,7 +48,6 @@ "speed_topbottom": {"value": 40 }, "speed_wall": { "value": 35 }, "speed_wall_x": { "value": 40 }, - "speed_equalize_flow_max": { "value": 70 }, "retraction_enable": {"default_value":true}, "retraction_amount": { "default_value": 4 }, diff --git a/resources/definitions/liquid.def.json b/resources/definitions/liquid.def.json index 744cbb9f3c..89c0b1c50e 100644 --- a/resources/definitions/liquid.def.json +++ b/resources/definitions/liquid.def.json @@ -144,7 +144,6 @@ "retraction_prime_speed": { "value": "35" }, "skin_overlap": { "value": "10" }, - "speed_equalize_flow_enabled": { "value": "True" }, "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "35" }, diff --git a/resources/definitions/maker_made_300x.def.json b/resources/definitions/maker_made_300x.def.json index b9aaac9e96..9a4cd78d28 100644 --- a/resources/definitions/maker_made_300x.def.json +++ b/resources/definitions/maker_made_300x.def.json @@ -92,7 +92,6 @@ "speed_layer_0": {"value": 10}, "speed_travel_layer_0": {"value": 50}, "speed_slowdown_layers": {"value": 2}, - "speed_equalize_flow_enabled": {"value": false }, "acceleration_enabled": {"value": false }, "acceleration_roofing": {"value": 3000 }, "jerk_enabled": {"value": false }, diff --git a/resources/definitions/peopoly_moai.def.json b/resources/definitions/peopoly_moai.def.json index 7ca7d67466..cbc668dc74 100644 --- a/resources/definitions/peopoly_moai.def.json +++ b/resources/definitions/peopoly_moai.def.json @@ -209,10 +209,6 @@ "material_flow_layer_0": { "enabled": false }, - "speed_equalize_flow_enabled": { - "enabled": false, - "value": "False" - }, "draft_shield_enabled": { "enabled": false, "value": "False" diff --git a/resources/definitions/skriware_2.def.json b/resources/definitions/skriware_2.def.json index 23b3b7bc7a..dcef30d8b0 100644 --- a/resources/definitions/skriware_2.def.json +++ b/resources/definitions/skriware_2.def.json @@ -578,9 +578,6 @@ "infill_material_flow": { "value": "99" }, - "speed_equalize_flow_max": { - "default_value": 40 - }, "skin_preshrink": { "value": "0.0" }, diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index 43f32a96dc..52a84b5a4f 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -131,7 +131,6 @@ "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, "skin_overlap": { "value": "10" }, - "speed_equalize_flow_enabled": { "value": "True" }, "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "35" }, diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index 71de826953..89b37409ca 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -133,7 +133,6 @@ "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, "skin_overlap": { "value": "10" }, - "speed_equalize_flow_enabled": { "value": "True" }, "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "35" }, diff --git a/resources/definitions/winbo_dragonl4.def.json b/resources/definitions/winbo_dragonl4.def.json index 2798abffc2..746b9ce2fe 100644 --- a/resources/definitions/winbo_dragonl4.def.json +++ b/resources/definitions/winbo_dragonl4.def.json @@ -107,7 +107,6 @@ "speed_wall": { "value": "speed_print*wall_line_width_0/line_width" }, "speed_wall_0": { "value": "math.ceil(speed_wall * 0.6)" }, "speed_wall_x": { "value": "speed_wall" }, - "speed_equalize_flow_enabled": { "value": "False" }, "support_angle": { "value": "50" }, "support_xy_distance": { "value": "1" }, "support_z_distance": { "value": "max((0.2 if(0.2%layer_height==0) else layer_height*int((0.2+layer_height)/layer_height)),layer_height)" }, @@ -129,7 +128,6 @@ "support_interface_enable": { "value": "True" }, "support_interface_height": { "value": "0.5" }, "support_roof_pattern": { "value": "'concentric'" }, - "z_seam_type": { "value": "'shortest'" }, - "speed_equalize_flow_max": { "value": "65" } + "z_seam_type": { "value": "'shortest'" } } } diff --git a/resources/definitions/winbo_mini2.def.json b/resources/definitions/winbo_mini2.def.json index a43948a49d..903142010b 100644 --- a/resources/definitions/winbo_mini2.def.json +++ b/resources/definitions/winbo_mini2.def.json @@ -107,7 +107,6 @@ "speed_wall": { "value": "speed_print*wall_line_width_0/line_width" }, "speed_wall_0": { "value": "math.ceil(speed_wall * 0.6)" }, "speed_wall_x": { "value": "speed_wall" }, - "speed_equalize_flow_enabled": { "value": "False" }, "support_angle": { "value": "50" }, "support_xy_distance": { "value": "1" }, "support_z_distance": { "value": "max((0.2 if(0.2%layer_height==0) else layer_height*int((0.2+layer_height)/layer_height)),layer_height)" }, @@ -129,7 +128,6 @@ "support_interface_enable": { "value": "True" }, "support_interface_height": { "value": "0.5" }, "support_roof_pattern": { "value": "'concentric'" }, - "z_seam_type": { "value": "'shortest'" }, - "speed_equalize_flow_max": { "value": "65" } + "z_seam_type": { "value": "'shortest'" } } } diff --git a/resources/definitions/winbo_superhelper105.def.json b/resources/definitions/winbo_superhelper105.def.json index 2da031cb99..055967f8ab 100644 --- a/resources/definitions/winbo_superhelper105.def.json +++ b/resources/definitions/winbo_superhelper105.def.json @@ -96,7 +96,6 @@ "speed_wall": { "value": "speed_print*wall_line_width_0/line_width" }, "speed_wall_0": { "value": "math.ceil(speed_wall * 0.6)" }, "speed_wall_x": { "value": "speed_wall" }, - "speed_equalize_flow_enabled": { "value": "False" }, "support_angle": { "value": "50" }, "support_xy_distance": { "value": "1" }, "support_z_distance": { "value": "max((0.2 if(0.2%layer_height==0) else layer_height*int((0.2+layer_height)/layer_height)),layer_height)" }, @@ -118,7 +117,6 @@ "support_interface_enable": { "value": "True" }, "support_interface_height": { "value": "0.5" }, "support_roof_pattern": { "value": "'concentric'" }, - "z_seam_type": { "value": "'shortest'" }, - "speed_equalize_flow_max": { "value": "65" } + "z_seam_type": { "value": "'shortest'" } } } diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg index 7469d1e9ba..f82f7aa925 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg @@ -51,8 +51,6 @@ speed_layer_0 = 25 speed_support = 40 speed_travel_layer_0 = 45 speed_slowdown_layers = 1 -speed_equalize_flow_enabled = True -speed_equalize_flow_max = 150 retraction_combing = all travel_avoid_other_parts = True diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg index cb236e9425..79806a8684 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg @@ -51,8 +51,6 @@ speed_layer_0 = 25 speed_support = 40 speed_travel_layer_0 = 45 speed_slowdown_layers = 1 -speed_equalize_flow_enabled = True -speed_equalize_flow_max = 150 retraction_combing = all travel_avoid_other_parts = True diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg index 556bfe5d72..2de19bb92c 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg @@ -51,8 +51,6 @@ speed_layer_0 = 25 speed_support = 50 speed_travel_layer_0 = 45 speed_slowdown_layers = 1 -speed_equalize_flow_enabled = True -speed_equalize_flow_max = 150 acceleration_enabled = False retraction_combing = all diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg index 2d1682901f..1337306cc6 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg @@ -51,8 +51,6 @@ speed_layer_0 = 25 speed_support = 50 speed_travel_layer_0 = 45 speed_slowdown_layers = 1 -speed_equalize_flow_enabled = True -speed_equalize_flow_max = 150 acceleration_enabled = False retraction_combing = all diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg index 65636f0798..bc4cc0c7c2 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg @@ -51,8 +51,6 @@ speed_layer_0 = 25 speed_support = 40 speed_travel_layer_0 = 45 speed_slowdown_layers = 1 -speed_equalize_flow_enabled = True -speed_equalize_flow_max = 150 retraction_combing = all travel_avoid_other_parts = True diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg index e819b69aa9..e0b670f44e 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg @@ -51,8 +51,6 @@ speed_layer_0 = 25 speed_support = 40 speed_travel_layer_0 = 45 speed_slowdown_layers = 1 -speed_equalize_flow_enabled = True -speed_equalize_flow_max = 150 retraction_combing = all travel_avoid_other_parts = True diff --git a/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg b/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg index 96d62466bb..1c620f4449 100644 --- a/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg +++ b/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg @@ -39,8 +39,6 @@ speed_topbottom = =round(speed_print / 5 * 4) speed_travel = =round(speed_print if magic_spiralize else 150) speed_travel_layer_0 = =speed_travel speed_support_interface = =speed_topbottom -speed_equalize_flow_enabled = True -speed_equalize_flow_max = =speed_print acceleration_enabled = True acceleration_print = 100 diff --git a/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg b/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg index c6040f34a0..785eface17 100644 --- a/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg +++ b/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg @@ -39,8 +39,6 @@ speed_topbottom = =round(speed_print / 5 * 4) speed_travel = =round(speed_print if magic_spiralize else 150) speed_travel_layer_0 = =speed_travel speed_support_interface = =speed_topbottom -speed_equalize_flow_enabled = True -speed_equalize_flow_max = =speed_print acceleration_enabled = True acceleration_print = 100 diff --git a/resources/quality/key3d/key3d_tyro_best.inst.cfg b/resources/quality/key3d/key3d_tyro_best.inst.cfg index f88172adff..c24ff3e226 100644 --- a/resources/quality/key3d/key3d_tyro_best.inst.cfg +++ b/resources/quality/key3d/key3d_tyro_best.inst.cfg @@ -73,7 +73,6 @@ speed_travel = 150 speed_layer_0 = 10 speed_travel_layer_0 = 50 speed_slowdown_layers = 2 -speed_equalize_flow_enabled = False acceleration_enabled = False acceleration_roofing = 3000 jerk_enabled = False diff --git a/resources/quality/key3d/key3d_tyro_fast.inst.cfg b/resources/quality/key3d/key3d_tyro_fast.inst.cfg index bdbc8dd9b6..f78439d850 100644 --- a/resources/quality/key3d/key3d_tyro_fast.inst.cfg +++ b/resources/quality/key3d/key3d_tyro_fast.inst.cfg @@ -72,7 +72,6 @@ speed_travel = 150 speed_layer_0 = 10 speed_travel_layer_0 = 50 speed_slowdown_layers = 2 -speed_equalize_flow_enabled = False acceleration_enabled = False acceleration_roofing = 3000 jerk_enabled = False diff --git a/resources/quality/key3d/key3d_tyro_normal.inst.cfg b/resources/quality/key3d/key3d_tyro_normal.inst.cfg index 49dd6797f8..0946b26bc8 100644 --- a/resources/quality/key3d/key3d_tyro_normal.inst.cfg +++ b/resources/quality/key3d/key3d_tyro_normal.inst.cfg @@ -72,7 +72,6 @@ speed_travel = 150 speed_layer_0 = 10 speed_travel_layer_0 = 50 speed_slowdown_layers = 2 -speed_equalize_flow_enabled = False acceleration_enabled = False acceleration_roofing = 3000 jerk_enabled = False diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg index dd793384e9..44bd21ff70 100644 --- a/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg @@ -46,7 +46,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg index 53119945c3..d64a086fdd 100644 --- a/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg @@ -46,7 +46,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg index 1d67e53410..9563a3050b 100644 --- a/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg @@ -46,7 +46,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/liquid/liquid_vo0.4_TPU_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_TPU_Draft_Print.inst.cfg index db53cfb873..f7f3c42630 100644 --- a/resources/quality/liquid/liquid_vo0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_TPU_Draft_Print.inst.cfg @@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/liquid/liquid_vo0.4_TPU_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_TPU_Fast_Print.inst.cfg index 93179c729e..fb25093629 100644 --- a/resources/quality/liquid/liquid_vo0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_TPU_Fast_Print.inst.cfg @@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/liquid/liquid_vo0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_TPU_Normal_Quality.inst.cfg index 62cf295c8c..84d512536d 100644 --- a/resources/quality/liquid/liquid_vo0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_TPU_Normal_Quality.inst.cfg @@ -44,7 +44,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/nwa3d_a31/nwa3d_a31_best.inst.cfg b/resources/quality/nwa3d_a31/nwa3d_a31_best.inst.cfg index 9be48dbbd9..51d1220724 100644 --- a/resources/quality/nwa3d_a31/nwa3d_a31_best.inst.cfg +++ b/resources/quality/nwa3d_a31/nwa3d_a31_best.inst.cfg @@ -73,7 +73,6 @@ speed_travel = 150 speed_layer_0 = 10 speed_travel_layer_0 = 50 speed_slowdown_layers = 2 -speed_equalize_flow_enabled = False acceleration_enabled = False acceleration_roofing = 3000 jerk_enabled = False diff --git a/resources/quality/nwa3d_a31/nwa3d_a31_e.inst.cfg b/resources/quality/nwa3d_a31/nwa3d_a31_e.inst.cfg index 4d79d72c0d..1f34b1f04a 100644 --- a/resources/quality/nwa3d_a31/nwa3d_a31_e.inst.cfg +++ b/resources/quality/nwa3d_a31/nwa3d_a31_e.inst.cfg @@ -70,7 +70,6 @@ speed_travel = 150 speed_layer_0 = 10 speed_travel_layer_0 = 40 speed_slowdown_layers = 2 -speed_equalize_flow_enabled = False acceleration_enabled = False jerk_enabled = False retraction_combing = off diff --git a/resources/quality/nwa3d_a31/nwa3d_a31_fast.inst.cfg b/resources/quality/nwa3d_a31/nwa3d_a31_fast.inst.cfg index 4d5235d3b0..e9cd79ee27 100644 --- a/resources/quality/nwa3d_a31/nwa3d_a31_fast.inst.cfg +++ b/resources/quality/nwa3d_a31/nwa3d_a31_fast.inst.cfg @@ -73,7 +73,6 @@ speed_travel = 150 speed_layer_0 = 10 speed_travel_layer_0 = 50 speed_slowdown_layers = 2 -speed_equalize_flow_enabled = False acceleration_enabled = False acceleration_roofing = 3000 jerk_enabled = False diff --git a/resources/quality/nwa3d_a31/nwa3d_a31_normal.inst.cfg b/resources/quality/nwa3d_a31/nwa3d_a31_normal.inst.cfg index a6f8929e02..48dc561c45 100644 --- a/resources/quality/nwa3d_a31/nwa3d_a31_normal.inst.cfg +++ b/resources/quality/nwa3d_a31/nwa3d_a31_normal.inst.cfg @@ -72,7 +72,6 @@ speed_travel = 150 speed_layer_0 = 10 speed_travel_layer_0 = 50 speed_slowdown_layers = 2 -speed_equalize_flow_enabled = False acceleration_enabled = False acceleration_roofing = 3000 jerk_enabled = False diff --git a/resources/quality/nwa3d_a5/nwa3d_a5_best.inst.cfg b/resources/quality/nwa3d_a5/nwa3d_a5_best.inst.cfg index e5d7378267..bf90f99360 100644 --- a/resources/quality/nwa3d_a5/nwa3d_a5_best.inst.cfg +++ b/resources/quality/nwa3d_a5/nwa3d_a5_best.inst.cfg @@ -71,7 +71,6 @@ speed_travel = 150 speed_layer_0 = 10 speed_travel_layer_0 = 50 speed_slowdown_layers = 2 -speed_equalize_flow_enabled = False acceleration_enabled = False acceleration_roofing = 3000 jerk_enabled = False diff --git a/resources/quality/nwa3d_a5/nwa3d_a5_fast.inst.cfg b/resources/quality/nwa3d_a5/nwa3d_a5_fast.inst.cfg index 4fee0b35d9..827fea8996 100644 --- a/resources/quality/nwa3d_a5/nwa3d_a5_fast.inst.cfg +++ b/resources/quality/nwa3d_a5/nwa3d_a5_fast.inst.cfg @@ -71,7 +71,6 @@ speed_travel = 150 speed_layer_0 = 10 speed_travel_layer_0 = 50 speed_slowdown_layers = 2 -speed_equalize_flow_enabled = False acceleration_enabled = False acceleration_roofing = 3000 jerk_enabled = False diff --git a/resources/quality/nwa3d_a5/nwa3d_a5_normal.inst.cfg b/resources/quality/nwa3d_a5/nwa3d_a5_normal.inst.cfg index 7130766951..153525a4c4 100644 --- a/resources/quality/nwa3d_a5/nwa3d_a5_normal.inst.cfg +++ b/resources/quality/nwa3d_a5/nwa3d_a5_normal.inst.cfg @@ -71,7 +71,6 @@ speed_travel = 150 speed_layer_0 = 10 speed_travel_layer_0 = 50 speed_slowdown_layers = 2 -speed_equalize_flow_enabled = False acceleration_enabled = False acceleration_roofing = 3000 jerk_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index aea13c9472..a6f33ebf61 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -42,7 +42,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 13 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_travel = 300 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index 9d82ac0265..4c3b37375c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -48,7 +48,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index 85ff939622..2fa6c35c0a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -47,7 +47,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index 934b4da069..ba5e6db078 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -46,7 +46,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 843425554f..14aefd647c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -47,7 +47,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 3525f7c119..1b20c8c454 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -48,7 +48,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 7ed54549c9..42c4a94179 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg index 96b1ecdfd6..17131e9397 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -42,7 +42,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 13 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_travel_layer_0 = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg index 474d270b79..2132288bfe 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -46,7 +46,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg index 250ff8592b..ca0e648e7c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -46,7 +46,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg index cbaa7bb4d8..3569786c19 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -46,7 +46,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index be454401f8..522a574315 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index d2e82c6b3f..85b643be83 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg index 7174e7d2d0..8d4d0a2be8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -44,7 +44,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg index 60c4543f0c..ce92209489 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg @@ -42,7 +42,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 13 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_travel_layer_0 = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg index 8e82d3abd1..6ebb81c560 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg @@ -46,7 +46,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg index 85e5d5b4ac..9d4a379bd6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg @@ -46,7 +46,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg index 6debf4ca00..959d3199d0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg @@ -46,7 +46,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index 0dd85737b0..f2f557b8b8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index b5d1b74968..78592d5de2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -45,7 +45,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index 6eb19fe9d3..1a81413d39 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -44,7 +44,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/setting_visibility/expert.cfg b/resources/setting_visibility/expert.cfg index df33dc8ab3..46f373ce26 100644 --- a/resources/setting_visibility/expert.cfg +++ b/resources/setting_visibility/expert.cfg @@ -150,8 +150,7 @@ speed_print_layer_0 speed_travel_layer_0 skirt_brim_speed speed_slowdown_layers -speed_equalize_flow_enabled -speed_equalize_flow_max +speed_equalize_flow_width_factor acceleration_enabled acceleration_print acceleration_infill diff --git a/resources/variants/liquid_vo08.inst.cfg b/resources/variants/liquid_vo08.inst.cfg index 2606503ec1..ec014e9ec4 100644 --- a/resources/variants/liquid_vo08.inst.cfg +++ b/resources/variants/liquid_vo08.inst.cfg @@ -47,7 +47,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = 20 speed_print = 35 speed_topbottom = =math.ceil(speed_print * 25 / 35) diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index 53667efde4..580bf065af 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -48,7 +48,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = 20 speed_print = 35 speed_topbottom = =math.ceil(speed_print * 25 / 35) diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index 4bb418d452..bb77c17422 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -48,7 +48,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = 20 speed_print = 35 speed_topbottom = =math.ceil(speed_print * 25 / 35) diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index 46702e0503..46f92fbf68 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -48,7 +48,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = 20 speed_print = 35 speed_topbottom = =math.ceil(speed_print * 25 / 35) diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg index b68ebfdea6..a2c7a64b20 100644 --- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg @@ -48,7 +48,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = 20 speed_print = 35 speed_topbottom = =math.ceil(speed_print * 25 / 35)