Merge branch 'main' into PP-393-ASA-PA12-CF-SR30-Profiles

2025-08-09 23:05:01 -06:00 · 2024-02-22 10:39:41 +01:00 · 2024-02-22 10:39:41 +01:00 · fa01ac419a
commit fa01ac419a
parent 59a23231cc 5f884c737b
647 changed files with 748 additions and 659 deletions
--- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg
@ -38,8 +38,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
-prime_tower_enable = True
 prime_tower_min_volume = 6
+prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
--- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg
@ -38,8 +38,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
-prime_tower_enable = True
 prime_tower_min_volume = 6
+prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
--- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg
@ -36,8 +36,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
-prime_tower_enable = True
 prime_tower_min_volume = 6
+prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
--- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg
@ -36,8 +36,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
-prime_tower_enable = True
 prime_tower_min_volume = 6
+prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
--- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg
@ -35,8 +35,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
-prime_tower_enable = True
 prime_tower_min_volume = 6
+prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
--- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg
+++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg
@ -35,8 +35,8 @@ line_width = 0.4
 min_infill_area = 0
 optimize_wall_printing_order = True
 prime_tower_brim_enable = True
-prime_tower_enable = True
 prime_tower_min_volume = 6
+prime_tower_mode = normal
 prime_tower_size = 20
 prime_tower_wipe_enabled = True
 retract_at_layer_change = False
--- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg
@ -13,7 +13,7 @@ variant = DBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg
@ -13,7 +13,7 @@ variant = DBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg
@ -13,7 +13,7 @@ variant = DBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg
@ -13,7 +13,7 @@ variant = DBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg
@ -13,7 +13,7 @@ variant = DBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg
@ -13,7 +13,7 @@ variant = DBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg
@ -13,7 +13,7 @@ variant = DBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg
@ -13,7 +13,7 @@ variant = DBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg
@ -13,7 +13,7 @@ variant = DBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg
@ -13,7 +13,7 @@ variant = FBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg
@ -13,7 +13,7 @@ variant = FBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg
@ -13,7 +13,7 @@ variant = FBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg
@ -13,7 +13,7 @@ variant = FBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg
@ -13,7 +13,7 @@ variant = FBE 0.40mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg
@ -13,7 +13,7 @@ variant = FBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg
@ -13,7 +13,7 @@ variant = FBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg
@ -13,7 +13,7 @@ variant = FBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg
@ -13,7 +13,7 @@ variant = FBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg
@ -13,7 +13,7 @@ variant = V-DBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg
@ -13,7 +13,7 @@ variant = V-DBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg
@ -13,7 +13,7 @@ variant = V-DBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg
@ -13,7 +13,7 @@ variant = V-DBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg
@ -13,7 +13,7 @@ variant = V-FBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg
@ -13,7 +13,7 @@ variant = V-FBE 0.60mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg
@ -13,7 +13,7 @@ variant = V-FBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg
+++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg
@ -13,7 +13,7 @@ variant = V-FBE 0.80mm
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 support_bottom_distance = =support_z_distance
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
--- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg
+++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg
@ -13,7 +13,7 @@ variant = 0.40mm_Elegoo_Nozzle
 [values]
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-prime_tower_enable = False
+prime_tower_mode = none
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
--- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg
+++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg
@ -13,7 +13,7 @@ variant = 0.40mm_Elegoo_Nozzle
 [values]
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-prime_tower_enable = False
+prime_tower_mode = none
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_print = 70
--- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg
+++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg
@ -17,7 +17,7 @@ infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
-prime_tower_enable = False
+prime_tower_mode = none
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20
--- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg
+++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg
@ -20,7 +20,7 @@ infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = False
+prime_tower_mode = none
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20
--- a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg
+++ b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg
@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
+prime_tower_mode = normal
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg
+++ b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg
@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_enable = True
+prime_tower_mode = normal
 speed_infill = =math.ceil(speed_print * 35 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg
+++ b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg
@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_enable = True
+prime_tower_mode = normal
 speed_infill = =math.ceil(speed_print * 35 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg
+++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg
@ -11,7 +11,7 @@ type = quality
 variant = 0.40mm_Elegoo_Nozzle

 [values]
-prime_tower_enable = False
+prime_tower_mode = none
 raft_airgap = 0.25
 skin_overlap = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
--- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg
+++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg
@ -11,7 +11,7 @@ type = quality
 variant = 0.40mm_Elegoo_Nozzle

 [values]
-prime_tower_enable = False
+prime_tower_mode = none
 raft_airgap = 0.25
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)
--- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg
+++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg
@ -12,7 +12,7 @@ variant = 0.40mm_Elegoo_Nozzle

 [values]
 infill_sparse_density = 15
-prime_tower_enable = False
+prime_tower_mode = none
 raft_airgap = 0.25
 skin_overlap = 20
 top_bottom_thickness = 0.8
--- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg
+++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg
@ -14,7 +14,7 @@ variant = 0.40mm_Elegoo_Nozzle
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_sparse_density = 15
 material_print_temperature = =default_material_print_temperature + 5
-prime_tower_enable = False
+prime_tower_mode = none
 raft_airgap = 0.25
 skin_overlap = 20
 top_bottom_thickness = 0.9
--- a/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg
+++ b/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg
@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10
 ooze_shield_angle = 20
 ooze_shield_dist = 4
 ooze_shield_enabled = True
-prime_tower_enable = False
+prime_tower_mode = none
 retraction_amount = 0.75
 retraction_combing = off
 retraction_speed = 70
--- a/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg
+++ b/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg
@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10
 ooze_shield_angle = 20
 ooze_shield_dist = 4
 ooze_shield_enabled = True
-prime_tower_enable = False
+prime_tower_mode = none
 retraction_amount = 0.75
 retraction_combing = off
 retraction_speed = 70
--- a/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg
+++ b/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg
@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10
 ooze_shield_angle = 20
 ooze_shield_dist = 4
 ooze_shield_enabled = True
-prime_tower_enable = False
+prime_tower_mode = none
 retraction_amount = 0.75
 retraction_combing = off
 retraction_speed = 70
--- a/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg
+++ b/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg
@ -29,7 +29,7 @@ material_standby_temperature = =material_print_temperature - 10
 ooze_shield_angle = 20
 ooze_shield_dist = 4
 ooze_shield_enabled = True
-prime_tower_enable = False
+prime_tower_mode = none
 retraction_amount = 0.75
 retraction_combing = off
 retraction_speed = 70
--- a/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg
@ -18,7 +18,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
 material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 20
-prime_tower_enable = False
+prime_tower_mode = none
 skin_overlap = 20
 speed_infill = =math.ceil(speed_print * 50 / 60)
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
--- a/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg
@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
 material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_enable = False
+prime_tower_mode = none
 speed_infill = =math.ceil(speed_print * 45 / 60)
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_print = 60
--- a/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg
@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
 material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 5
-prime_tower_enable = False
+prime_tower_mode = none
 speed_infill = =math.ceil(speed_print * 40 / 50)
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
--- a/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg
@ -18,7 +18,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 20
 material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = False
+prime_tower_mode = none
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)
 speed_print = 55
--- a/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg
@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
-prime_tower_enable = True
+prime_tower_mode = normal
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
--- a/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg
@ -35,7 +35,7 @@ material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
-prime_tower_enable = True
+prime_tower_mode = normal
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
--- a/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg
@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 10
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
-prime_tower_enable = True
+prime_tower_mode = normal
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
--- a/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg
@ -34,7 +34,7 @@ material_initial_print_temperature = =material_print_temperature - 5
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
-prime_tower_enable = True
+prime_tower_mode = normal
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
--- a/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg
@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 speed_print = 70
--- a/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg
@ -20,7 +20,7 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
--- a/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg
@ -22,7 +22,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
--- a/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg
@ -21,7 +21,7 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 top_bottom_thickness = 1
--- a/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg
@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 speed_print = 70
--- a/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg
@ -20,7 +20,7 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
--- a/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg
@ -22,7 +22,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
--- a/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg
@ -21,7 +21,7 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
-prime_tower_enable = False
+prime_tower_mode = none
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 top_bottom_thickness = 1
--- a/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg
@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature + 5
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
 retraction_count_max = 12
--- a/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg
@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 13
 material_print_temperature_layer_0 = =material_print_temperature + 3
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
 retraction_count_max = 12
--- a/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg
@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 15
 material_print_temperature_layer_0 = =material_print_temperature + 3
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = False
+prime_tower_mode = none
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
 retraction_count_max = 12
--- a/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg
@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg
@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg
@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg
@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg
@ -17,7 +17,7 @@ jerk_travel = 20
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature + 15
 material_standby_temperature = 100
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
--- a/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg
@ -17,7 +17,7 @@ jerk_travel = 20
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature + 20
 material_standby_temperature = 100
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_combing_max_distance = 50
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
--- a/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg
@ -17,7 +17,7 @@ jerk_travel = 20
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature + 17
 material_standby_temperature = 100
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
--- a/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg
@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
 ooze_shield_angle = 40
-prime_tower_enable = True
+prime_tower_mode = normal
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
--- a/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg
@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
 ooze_shield_angle = 40
-prime_tower_enable = True
+prime_tower_mode = normal
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
--- a/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg
@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
 ooze_shield_angle = 40
-prime_tower_enable = True
+prime_tower_mode = normal
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
--- a/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg
@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg
@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_enable = True
+prime_tower_mode = normal
 raft_margin = 10
 retract_at_layer_change = False
 speed_print = 45
--- a/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg
@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg
@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg
@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_enable = True
+prime_tower_mode = normal
 raft_margin = 10
 retract_at_layer_change = False
 speed_print = 45
--- a/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg
@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
+prime_tower_mode = normal
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg
@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
-prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 10
+prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
--- a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg
@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
-prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 20
+prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
--- a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg
@ -25,9 +25,9 @@ material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
-prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 15
+prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
--- a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg
@ -30,8 +30,8 @@ material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature + 19
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
-prime_tower_enable = True
 prime_tower_flow = 100
+prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
--- a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg
@ -31,8 +31,8 @@ material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
-prime_tower_enable = True
 prime_tower_flow = 100
+prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
--- a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg
@ -30,8 +30,8 @@ material_initial_print_temperature = =material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
-prime_tower_enable = True
 prime_tower_flow = 100
+prime_tower_mode = normal
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
--- a/resources/quality/nps/nps_ABS_B.inst.cfg
+++ b/resources/quality/nps/nps_ABS_B.inst.cfg
@ -22,7 +22,7 @@ material_bed_temperature = 100
 material_flow = 96
 material_print_temperature = =default_material_print_temperature + 13
 material_print_temperature_layer_0 = =243
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_extra_prime_amount = 0.1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =3*line_width
--- a/resources/quality/nps/nps_ABS_C.inst.cfg
+++ b/resources/quality/nps/nps_ABS_C.inst.cfg
@ -22,7 +22,7 @@ material_bed_temperature = 100
 material_flow = 91
 material_print_temperature = =default_material_print_temperature + 15
 material_print_temperature_layer_0 = =245
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_extra_prime_amount = 0.1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =3*line_width
--- a/resources/quality/nps/nps_PC_A.inst.cfg
+++ b/resources/quality/nps/nps_PC_A.inst.cfg
@ -32,7 +32,7 @@ material_bed_temperature = 110
 material_flow = 100
 material_print_temperature = =default_material_print_temperature + 10
 material_print_temperature_layer_0 = =280
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_extra_prime_amount = 0.1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =3*line_width
--- a/resources/quality/nps/nps_PC_B.inst.cfg
+++ b/resources/quality/nps/nps_PC_B.inst.cfg
@ -32,7 +32,7 @@ material_bed_temperature = 110
 material_flow = 88
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = 275
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_extra_prime_amount = 0.1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =3*line_width
--- a/resources/quality/nps/nps_PC_C.inst.cfg
+++ b/resources/quality/nps/nps_PC_C.inst.cfg
@ -32,7 +32,7 @@ material_bed_temperature = 110
 material_flow = 88
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = 275
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_extra_prime_amount = 0.1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =3*line_width
--- a/resources/quality/nps/nps_PETG_A.inst.cfg
+++ b/resources/quality/nps/nps_PETG_A.inst.cfg
@ -22,7 +22,7 @@ material_bed_temperature = 80
 material_flow = 98
 material_print_temperature = =default_material_print_temperature + 20
 material_print_temperature_layer_0 = =230
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_extra_prime_amount = 0
 retraction_hop_only_when_collides = True
 retraction_min_travel = =3*line_width
--- a/resources/quality/nps/nps_PETG_B.inst.cfg
+++ b/resources/quality/nps/nps_PETG_B.inst.cfg
@ -22,7 +22,7 @@ material_bed_temperature = 80
 material_flow = 95
 material_print_temperature = =default_material_print_temperature + 20
 material_print_temperature_layer_0 = =230
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_extra_prime_amount = 0
 retraction_hop_only_when_collides = True
 retraction_min_travel = =3*line_width
--- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg
+++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg
@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4
 material_flow = 100
 material_print_temperature = =default_material_print_temperature + 3
 material_print_temperature_layer_0 = =default_material_print_temperature
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_extra_prime_amount = 0.1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =3*line_width
--- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg
+++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg
@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4
 material_flow = 96
 material_print_temperature = =default_material_print_temperature + 5
 material_print_temperature_layer_0 = =default_material_print_temperature + 3
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_extra_prime_amount = 0.1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =3*line_width
--- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg
+++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg
@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4
 material_flow = 91
 material_print_temperature = =default_material_print_temperature + 10
 material_print_temperature_layer_0 = =default_material_print_temperature + 5
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_extra_prime_amount = 0.1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =3*line_width
--- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg
+++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg
@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4
 material_flow = 100
 material_print_temperature = =default_material_print_temperature + 1
 material_print_temperature_layer_0 = =default_material_print_temperature
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_extra_prime_amount = 0.1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =3*line_width
--- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg
+++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg
@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4
 material_flow = 96
 material_print_temperature = =default_material_print_temperature + 3
 material_print_temperature_layer_0 = =default_material_print_temperature + 1
-prime_tower_enable = True
+prime_tower_mode = normal
 retraction_extra_prime_amount = 0.1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =3*line_width
--- a/Show more
+++ b/Show more