mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-06-26 09:25:24 -06:00
Merge branch 'main' into feature/makerbot-reader
Some checks failed
printer-linter-format / Printer linter auto format (push) Has been cancelled
Some checks failed
printer-linter-format / Printer linter auto format (push) Has been cancelled
This commit is contained in:
Jelle Spijker
GitHub
commit
f5843846cb
105 changed files with 1007 additions and 504 deletions
|
|
@ -258,11 +258,87 @@ class MakerbotWriter(MeshWriter):
|
|||
|
||||
meta["preferences"] = dict()
|
||||
bounds = application.getBuildVolume().getBoundingBox()
|
||||
intent = CuraApplication.getInstance().getIntentManager().currentIntentCategory
|
||||
meta["preferences"]["instance0"] = {
|
||||
"machineBounds": [bounds.right, bounds.front, bounds.left, bounds.back] if bounds is not None else None,
|
||||
"printMode": CuraApplication.getInstance().getIntentManager().currentIntentCategory,
|
||||
"printMode": intent
|
||||
}
|
||||
|
||||
if file_format == "application/x-makerbot":
|
||||
accel_overrides = meta["accel_overrides"] = {}
|
||||
if intent in ['highspeed', 'highspeedsolid']:
|
||||
accel_overrides['do_input_shaping'] = True
|
||||
accel_overrides['do_corner_rounding'] = True
|
||||
bead_mode_overrides = accel_overrides["bead_mode"] = {}
|
||||
|
||||
accel_enabled = global_stack.getProperty('acceleration_enabled', 'value')
|
||||
|
||||
if accel_enabled:
|
||||
global_accel_setting = global_stack.getProperty('acceleration_print', 'value')
|
||||
accel_overrides["rate_mm_per_s_sq"] = {
|
||||
"x": global_accel_setting,
|
||||
"y": global_accel_setting
|
||||
}
|
||||
|
||||
if global_stack.getProperty('acceleration_travel_enabled', 'value'):
|
||||
travel_accel_setting = global_stack.getProperty('acceleration_travel', 'value')
|
||||
bead_mode_overrides['Travel Move'] = {
|
||||
"rate_mm_per_s_sq": {
|
||||
"x": travel_accel_setting,
|
||||
"y": travel_accel_setting
|
||||
}
|
||||
}
|
||||
|
||||
jerk_enabled = global_stack.getProperty('jerk_enabled', 'value')
|
||||
if jerk_enabled:
|
||||
global_jerk_setting = global_stack.getProperty('jerk_print', 'value')
|
||||
accel_overrides["max_speed_change_mm_per_s"] = {
|
||||
"x": global_jerk_setting,
|
||||
"y": global_jerk_setting
|
||||
}
|
||||
|
||||
if global_stack.getProperty('jerk_travel_enabled', 'value'):
|
||||
travel_jerk_setting = global_stack.getProperty('jerk_travel', 'value')
|
||||
if 'Travel Move' not in bead_mode_overrides:
|
||||
bead_mode_overrides['Travel Move' ] = {}
|
||||
bead_mode_overrides['Travel Move'].update({
|
||||
"max_speed_change_mm_per_s": {
|
||||
"x": travel_jerk_setting,
|
||||
"y": travel_jerk_setting
|
||||
}
|
||||
})
|
||||
|
||||
|
||||
# Get bead mode settings per extruder
|
||||
available_bead_modes = {
|
||||
"infill": "FILL",
|
||||
"prime_tower": "PRIME_TOWER",
|
||||
"roofing": "TOP_SURFACE",
|
||||
"support_infill": "SUPPORT",
|
||||
"support_interface": "SUPPORT_INTERFACE",
|
||||
"wall_0": "WALL_OUTER",
|
||||
"wall_x": "WALL_INNER",
|
||||
"skirt_brim": "SKIRT"
|
||||
}
|
||||
for idx, extruder in enumerate(extruders):
|
||||
for bead_mode_setting, bead_mode_tag in available_bead_modes.items():
|
||||
ext_specific_tag = "%s_%s" % (bead_mode_tag, idx)
|
||||
if accel_enabled or jerk_enabled:
|
||||
bead_mode_overrides[ext_specific_tag] = {}
|
||||
|
||||
if accel_enabled:
|
||||
accel_val = extruder.getProperty('acceleration_%s' % bead_mode_setting, 'value')
|
||||
bead_mode_overrides[ext_specific_tag]["rate_mm_per_s_sq"] = {
|
||||
"x": accel_val,
|
||||
"y": accel_val
|
||||
}
|
||||
if jerk_enabled:
|
||||
jerk_val = extruder.getProperty('jerk_%s' % bead_mode_setting, 'value')
|
||||
bead_mode_overrides[ext_specific_tag][ "max_speed_change_mm_per_s"] = {
|
||||
"x": jerk_val,
|
||||
"y": jerk_val
|
||||
}
|
||||
|
||||
meta["miracle_config"] = {"gaggles": {"instance0": {}}}
|
||||
|
||||
version_info = dict()
|
||||
|
|
|
|||
Binary file not shown.
|
Before Width: | Height: | Size: 202 KiB After Width: | Height: | Size: 90 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 620 KiB After Width: | Height: | Size: 64 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 140 KiB After Width: | Height: | Size: 90 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 185 KiB After Width: | Height: | Size: 75 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 398 KiB After Width: | Height: | Size: 119 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 899 KiB After Width: | Height: | Size: 138 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 682 KiB After Width: | Height: | Size: 110 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 874 KiB After Width: | Height: | Size: 50 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 430 KiB After Width: | Height: | Size: 123 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 1.2 MiB After Width: | Height: | Size: 90 KiB |
BIN
plugins/UM3NetworkPrinting/resources/png/Ultimaker S6.png
Normal file
BIN
plugins/UM3NetworkPrinting/resources/png/Ultimaker S6.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 107 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 735 KiB After Width: | Height: | Size: 77 KiB |
BIN
plugins/UM3NetworkPrinting/resources/png/Ultimaker S8.png
Normal file
BIN
plugins/UM3NetworkPrinting/resources/png/Ultimaker S8.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 141 KiB |
|
|
@ -48,7 +48,7 @@
|
|||
"machine_width": { "default_value": 220 },
|
||||
"material_print_temp_wait": { "default_value": false },
|
||||
"retraction_amount": { "default_value": 0.8 },
|
||||
"retraction_combing": { "value": "no_outer_surfaces" },
|
||||
"retraction_combing": { "value": "'no_outer_surfaces'" },
|
||||
"retraction_combing_max_distance": { "value": 5.0 },
|
||||
"retraction_extrusion_window": { "value": "retraction_amount" },
|
||||
"retraction_min_travel": { "value": 2.0 },
|
||||
|
|
|
|||
|
|
@ -48,23 +48,111 @@
|
|||
"infill_material_flow": { "value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow" },
|
||||
"infill_overlap": { "value": "0 if infill_sparse_density > 80 else 10" },
|
||||
"inset_direction": { "value": "'outside_in'" },
|
||||
"jerk_infill": { "minimum_value_warning": 20 },
|
||||
"jerk_prime_tower": { "minimum_value_warning": 20 },
|
||||
"jerk_flooring":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_infill":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_layer_0": { "minimum_value": 1 },
|
||||
"jerk_prime_tower":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_print":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20,
|
||||
"value": "20"
|
||||
},
|
||||
"jerk_print_layer_0": { "value": "max(20, jerk_wall_0)" },
|
||||
"jerk_roofing": { "minimum_value_warning": 20 },
|
||||
"jerk_support": { "minimum_value_warning": 20 },
|
||||
"jerk_support_infill": { "minimum_value_warning": 20 },
|
||||
"jerk_support_interface": { "minimum_value_warning": 20 },
|
||||
"jerk_topbottom": { "minimum_value_warning": 20 },
|
||||
"jerk_travel": { "value": "jerk_print" },
|
||||
"jerk_print_layer_0":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"value": "max(20, jerk_wall_0)"
|
||||
},
|
||||
"jerk_roofing":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_skirt_brim": { "minimum_value": 1 },
|
||||
"jerk_support":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_support_bottom":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_support_infill":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_support_interface":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_support_roof":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_topbottom":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_travel":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"value": "jerk_print"
|
||||
},
|
||||
"jerk_travel_enabled": { "value": false },
|
||||
"jerk_wall": { "minimum_value_warning": 20 },
|
||||
"jerk_wall_0": { "minimum_value_warning": 20 },
|
||||
"jerk_travel_layer_0": { "minimum_value": 1 },
|
||||
"jerk_wall":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_wall_0":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_wall_0_flooring":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_wall_0_roofing":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_wall_x":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_wall_x_flooring":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_wall_x_roofing":
|
||||
{
|
||||
"minimum_value": 1,
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"layer_height": { "value": 0.15 },
|
||||
"layer_height_0": { "value": "max(0.2, layer_height)" },
|
||||
"line_width": { "value": "machine_nozzle_size" },
|
||||
|
|
|
|||
|
|
@ -33,12 +33,15 @@
|
|||
{
|
||||
"acceleration_enabled":
|
||||
{
|
||||
"enabled": false,
|
||||
"enabled": true,
|
||||
"value": true
|
||||
},
|
||||
"acceleration_infill":
|
||||
{
|
||||
"enabled": false,
|
||||
"maximum_value": 3500,
|
||||
"minimum_value": 200,
|
||||
"minimum_value_warning": 750,
|
||||
"value": "acceleration_print"
|
||||
},
|
||||
"acceleration_layer_0":
|
||||
|
|
@ -49,11 +52,17 @@
|
|||
"acceleration_prime_tower":
|
||||
{
|
||||
"enabled": false,
|
||||
"maximum_value": 3500,
|
||||
"minimum_value": 200,
|
||||
"minimum_value_warning": 750,
|
||||
"value": "acceleration_print"
|
||||
},
|
||||
"acceleration_print":
|
||||
{
|
||||
"enabled": false,
|
||||
"maximum_value": 3500,
|
||||
"minimum_value": 200,
|
||||
"minimum_value_warning": 750,
|
||||
"value": 800
|
||||
},
|
||||
"acceleration_print_layer_0":
|
||||
|
|
@ -64,32 +73,52 @@
|
|||
"acceleration_roofing":
|
||||
{
|
||||
"enabled": false,
|
||||
"maximum_value": 3500,
|
||||
"minimum_value": 200,
|
||||
"minimum_value_warning": 750,
|
||||
"value": "acceleration_print"
|
||||
},
|
||||
"acceleration_skirt_brim":
|
||||
{
|
||||
"enabled": false,
|
||||
"maximum_value": 3500,
|
||||
"minimum_value": 200,
|
||||
"minimum_value_warning": 750,
|
||||
"value": 800
|
||||
},
|
||||
"acceleration_support":
|
||||
{
|
||||
"enabled": false,
|
||||
"maximum_value": 3500,
|
||||
"minimum_value": 200,
|
||||
"minimum_value_warning": 750,
|
||||
"value": "acceleration_print"
|
||||
},
|
||||
"acceleration_support_bottom":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "acceleration_print"
|
||||
"value": "acceleration_support_interface"
|
||||
},
|
||||
"acceleration_support_infill":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "acceleration_print"
|
||||
"maximum_value": 3500,
|
||||
"minimum_value": 200,
|
||||
"minimum_value_warning": 750,
|
||||
"value": "acceleration_support"
|
||||
},
|
||||
"acceleration_support_interface":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "acceleration_print"
|
||||
"maximum_value": 3500,
|
||||
"minimum_value": 200,
|
||||
"minimum_value_warning": 750,
|
||||
"value": "acceleration_support"
|
||||
},
|
||||
"acceleration_support_roof":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "acceleration_print"
|
||||
"value": "acceleration_support_interface"
|
||||
},
|
||||
"acceleration_topbottom":
|
||||
{
|
||||
|
|
@ -99,6 +128,9 @@
|
|||
"acceleration_travel":
|
||||
{
|
||||
"enabled": false,
|
||||
"maximum_value": 5000,
|
||||
"minimum_value": 200,
|
||||
"minimum_value_warning": 750,
|
||||
"value": 5000
|
||||
},
|
||||
"acceleration_travel_enabled":
|
||||
|
|
@ -114,27 +146,36 @@
|
|||
"acceleration_wall":
|
||||
{
|
||||
"enabled": false,
|
||||
"maximum_value": 3500,
|
||||
"minimum_value": 200,
|
||||
"minimum_value_warning": 750,
|
||||
"value": "acceleration_print"
|
||||
},
|
||||
"acceleration_wall_0":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "acceleration_print"
|
||||
"maximum_value": 3500,
|
||||
"minimum_value": 200,
|
||||
"minimum_value_warning": 750,
|
||||
"value": "acceleration_wall"
|
||||
},
|
||||
"acceleration_wall_0_roofing":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "acceleration_print"
|
||||
"value": "acceleration_wall"
|
||||
},
|
||||
"acceleration_wall_x":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "acceleration_print"
|
||||
"maximum_value": 3500,
|
||||
"minimum_value": 200,
|
||||
"minimum_value_warning": 750,
|
||||
"value": "acceleration_wall"
|
||||
},
|
||||
"acceleration_wall_x_roofing":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "acceleration_print"
|
||||
"value": "acceleration_wall"
|
||||
},
|
||||
"adhesion_extruder_nr":
|
||||
{
|
||||
|
|
@ -203,12 +244,15 @@
|
|||
"inset_direction": { "value": "'inside_out'" },
|
||||
"jerk_enabled":
|
||||
{
|
||||
"enabled": false,
|
||||
"enabled": true,
|
||||
"value": true
|
||||
},
|
||||
"jerk_infill":
|
||||
{
|
||||
"enabled": false,
|
||||
"enabled": "jerk_enabled",
|
||||
"maximum_value": 35,
|
||||
"minimum_value": 5,
|
||||
"minimum_value_warning": 12,
|
||||
"value": "jerk_print"
|
||||
},
|
||||
"jerk_layer_0":
|
||||
|
|
@ -218,13 +262,19 @@
|
|||
},
|
||||
"jerk_prime_tower":
|
||||
{
|
||||
"enabled": false,
|
||||
"enabled": "jerk_enabled and prime_tower_enable and extruders_enabled_count > 1",
|
||||
"maximum_value": 35,
|
||||
"minimum_value": 5,
|
||||
"minimum_value_warning": 12,
|
||||
"value": "jerk_print"
|
||||
},
|
||||
"jerk_print":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": 6.25
|
||||
"enabled": "jerk_enabled",
|
||||
"maximum_value": 35,
|
||||
"minimum_value": 5,
|
||||
"minimum_value_warning": 12,
|
||||
"value": 12.5
|
||||
},
|
||||
"jerk_print_layer_0":
|
||||
{
|
||||
|
|
@ -233,33 +283,50 @@
|
|||
},
|
||||
"jerk_roofing":
|
||||
{
|
||||
"enabled": false,
|
||||
"enabled": "jerk_enabled",
|
||||
"maximum_value": 35,
|
||||
"minimum_value": 5,
|
||||
"minimum_value_warning": 12,
|
||||
"value": "jerk_print"
|
||||
},
|
||||
"jerk_skirt_brim":
|
||||
{
|
||||
"enabled": "jerk_enabled and (adhesion_type == 'brim' or adhesion_type == 'skirt')",
|
||||
"value": 12.5
|
||||
},
|
||||
"jerk_support":
|
||||
{
|
||||
"enabled": false,
|
||||
"enabled": "jerk_enabled and support_enable",
|
||||
"maximum_value": 35,
|
||||
"minimum_value": 5,
|
||||
"minimum_value_warning": 12,
|
||||
"value": "jerk_print"
|
||||
},
|
||||
"jerk_support_bottom":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "jerk_print"
|
||||
"value": "jerk_support_interface"
|
||||
},
|
||||
"jerk_support_infill":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "jerk_print"
|
||||
"enabled": "jerk_enabled and support_enable",
|
||||
"maximum_value": 35,
|
||||
"minimum_value": 5,
|
||||
"minimum_value_warning": 12,
|
||||
"value": "jerk_support"
|
||||
},
|
||||
"jerk_support_interface":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "jerk_print"
|
||||
"enabled": "jerk_enabled and support_enable",
|
||||
"maximum_value": 35,
|
||||
"minimum_value": 5,
|
||||
"minimum_value_warning": 12,
|
||||
"value": "jerk_support"
|
||||
},
|
||||
"jerk_support_roof":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "jerk_print"
|
||||
"value": "jerk_support_interface"
|
||||
},
|
||||
"jerk_topbottom":
|
||||
{
|
||||
|
|
@ -268,8 +335,11 @@
|
|||
},
|
||||
"jerk_travel":
|
||||
{
|
||||
"enabled": false,
|
||||
"value": "jerk_print"
|
||||
"enabled": "jerk_enabled",
|
||||
"maximum_value": 35,
|
||||
"minimum_value": 5,
|
||||
"minimum_value_warning": 12,
|
||||
"value": 12.5
|
||||
},
|
||||
"jerk_travel_enabled":
|
||||
{
|
||||
|
|
@ -283,12 +353,18 @@
|
|||
},
|
||||
"jerk_wall":
|
||||
{
|
||||
"enabled": false,
|
||||
"enabled": "jerk_enabled",
|
||||
"maximum_value": 35,
|
||||
"minimum_value": 5,
|
||||
"minimum_value_warning": 12,
|
||||
"value": "jerk_print"
|
||||
},
|
||||
"jerk_wall_0":
|
||||
{
|
||||
"enabled": false,
|
||||
"enabled": "jerk_enabled",
|
||||
"maximum_value": 35,
|
||||
"minimum_value": 5,
|
||||
"minimum_value_warning": 12,
|
||||
"value": "jerk_print"
|
||||
},
|
||||
"jerk_wall_0_roofing":
|
||||
|
|
@ -298,7 +374,10 @@
|
|||
},
|
||||
"jerk_wall_x":
|
||||
{
|
||||
"enabled": false,
|
||||
"enabled": "jerk_enabled",
|
||||
"maximum_value": 35,
|
||||
"minimum_value": 5,
|
||||
"minimum_value_warning": 12,
|
||||
"value": "jerk_print"
|
||||
},
|
||||
"jerk_wall_x_roofing":
|
||||
|
|
@ -517,16 +596,86 @@
|
|||
"skirt_height": { "value": 3 },
|
||||
"small_skin_width": { "value": 4 },
|
||||
"speed_equalize_flow_width_factor": { "value": 0 },
|
||||
"speed_prime_tower": { "value": "speed_topbottom" },
|
||||
"speed_print": { "value": 50 },
|
||||
"speed_roofing": { "value": "speed_wall_0" },
|
||||
"speed_support": { "value": "speed_wall" },
|
||||
"speed_support_interface": { "value": "speed_topbottom" },
|
||||
"speed_topbottom": { "value": "speed_wall" },
|
||||
"speed_infill":
|
||||
{
|
||||
"maximum_value": 350,
|
||||
"maximum_value_warning": 325
|
||||
},
|
||||
"speed_prime_tower":
|
||||
{
|
||||
"maximum_value": 250,
|
||||
"maximum_value_warning": 200,
|
||||
"value": "speed_topbottom"
|
||||
},
|
||||
"speed_print":
|
||||
{
|
||||
"maximum_value": 350,
|
||||
"maximum_value_warning": 325,
|
||||
"value": 50
|
||||
},
|
||||
"speed_roofing":
|
||||
{
|
||||
"maximum_value": 300,
|
||||
"maximum_value_warning": 275,
|
||||
"value": "speed_wall_0"
|
||||
},
|
||||
"speed_support":
|
||||
{
|
||||
"maximum_value": 350,
|
||||
"maximum_value_warning": 325,
|
||||
"value": "speed_wall"
|
||||
},
|
||||
"speed_support_infill":
|
||||
{
|
||||
"maximum_value": 350,
|
||||
"maximum_value_warning": 325
|
||||
},
|
||||
"speed_support_interface":
|
||||
{
|
||||
"maximum_value": 260,
|
||||
"maximum_value_warning": 255,
|
||||
"value": "speed_topbottom"
|
||||
},
|
||||
"speed_support_roof":
|
||||
{
|
||||
"maximum_value": 260,
|
||||
"maximum_value_warning": 255
|
||||
},
|
||||
"speed_topbottom":
|
||||
{
|
||||
"maximum_value": 260,
|
||||
"maximum_value_warning": 255,
|
||||
"value": "speed_wall"
|
||||
},
|
||||
"speed_travel": { "value": 250 },
|
||||
"speed_wall": { "value": "speed_print * 40/50" },
|
||||
"speed_wall_0": { "value": "speed_wall * 30/40" },
|
||||
"speed_wall_x": { "value": "speed_wall" },
|
||||
"speed_wall":
|
||||
{
|
||||
"maximum_value": 260,
|
||||
"maximum_value_warning": 255,
|
||||
"value": "speed_print * 40/50"
|
||||
},
|
||||
"speed_wall_0":
|
||||
{
|
||||
"maximum_value": 260,
|
||||
"maximum_value_warning": 255,
|
||||
"value": "speed_wall * 30/40"
|
||||
},
|
||||
"speed_wall_0_roofing":
|
||||
{
|
||||
"maximum_value": 260,
|
||||
"maximum_value_warning": 255
|
||||
},
|
||||
"speed_wall_x":
|
||||
{
|
||||
"maximum_value": 260,
|
||||
"maximum_value_warning": 255,
|
||||
"value": "speed_wall"
|
||||
},
|
||||
"speed_wall_x_roofing":
|
||||
{
|
||||
"maximum_value": 260,
|
||||
"maximum_value_warning": 255
|
||||
},
|
||||
"support_angle": { "value": 40 },
|
||||
"support_bottom_height": { "value": "2*support_infill_sparse_thickness" },
|
||||
"support_bottom_line_width":
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Ultimaker Original Dual Extrusion",
|
||||
"inherits": "ultimaker",
|
||||
"inherits": "ultimaker_original",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
|
|
@ -49,10 +49,13 @@
|
|||
},
|
||||
"overrides":
|
||||
{
|
||||
"cool_fan_speed_0": { "value": "cool_fan_speed_min" },
|
||||
"gantry_height": { "value": "55" },
|
||||
"infill_before_walls": { "value": "True" },
|
||||
"layer_height_0": { "value": "max(0.2, layer_height)" },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"machine_depth": { "default_value": 195 },
|
||||
"machine_end_gcode": { "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
|
||||
"machine_end_gcode": { "value": "'M104 T0 S0 ;1st extruder heater off\\nM104 T1 S0 ;2nd extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning'" },
|
||||
"machine_extruder_count": { "default_value": 2 },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_head_with_fans_polygon":
|
||||
|
|
@ -65,9 +68,11 @@
|
|||
]
|
||||
},
|
||||
"machine_height": { "default_value": 200 },
|
||||
"machine_name": { "default_value": "Ultimaker Original" },
|
||||
"machine_name": { "default_value": "Ultimaker Original Dual Extrusion" },
|
||||
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nT1 ;Switch to the 2nd extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F200 E-{switch_extruder_retraction_amount}\nT0 ;Switch to the 1st extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
|
||||
"machine_use_extruder_offset_to_offset_coords": { "default_value": true },
|
||||
"machine_width": { "default_value": 205 }
|
||||
"machine_width": { "default_value": 205 },
|
||||
"material_print_temp_wait": { "value": false },
|
||||
"speed_slowdown_layers": { "value": 1 }
|
||||
}
|
||||
}
|
||||
|
|
@ -9,9 +9,7 @@
|
|||
"manufacturer": "Ultimaker B.V.",
|
||||
"file_formats": "application/x-ufp;text/x-gcode",
|
||||
"platform": "ultimaker_s5_platform.obj",
|
||||
"bom_numbers": [
|
||||
10700
|
||||
],
|
||||
"bom_numbers": [10700, 10701],
|
||||
"firmware_update_info":
|
||||
{
|
||||
"check_urls": [ "https://software.ultimaker.com/releases/firmware/5078167/stable/um-update.swu.version" ],
|
||||
|
|
@ -48,6 +46,6 @@
|
|||
"overrides":
|
||||
{
|
||||
"adhesion_type": { "value": "'brim'" },
|
||||
"machine_name": { "default_value": "UltiMaker S6" }
|
||||
"machine_name": { "default_value": "Ultimaker S6" }
|
||||
}
|
||||
}
|
||||
|
|
@ -47,7 +47,7 @@
|
|||
"overrides":
|
||||
{
|
||||
"default_material_print_temperature": { "maximum_value_warning": "320" },
|
||||
"machine_name": { "default_value": "UltiMaker S7" },
|
||||
"machine_name": { "default_value": "Ultimaker S7" },
|
||||
"material_print_temperature_layer_0": { "maximum_value_warning": "320" }
|
||||
}
|
||||
}
|
||||
|
|
@ -12,6 +12,17 @@
|
|||
"bom_numbers": [
|
||||
10600
|
||||
],
|
||||
"exclude_materials": [
|
||||
"generic_hips",
|
||||
"generic_flexible",
|
||||
"generic_cffpps",
|
||||
"generic_cffpa",
|
||||
"generic_cffcpe",
|
||||
"generic_gffpa",
|
||||
"generic_gffcpe",
|
||||
"structur3d_",
|
||||
"ultimaker_ppscf"
|
||||
],
|
||||
"firmware_update_info":
|
||||
{
|
||||
"check_urls": [ "https://software.ultimaker.com/releases/firmware/10600/stable/um-update.swu.version" ],
|
||||
|
|
@ -203,6 +214,14 @@
|
|||
"unit": "mm/s",
|
||||
"value": 50
|
||||
},
|
||||
"build_volume_temperature":
|
||||
{
|
||||
"force_depends_on_settings": [
|
||||
"support_extruder_nr",
|
||||
"support_enable"
|
||||
]
|
||||
},
|
||||
"cool_during_extruder_switch": { "value": "'all_fans'" },
|
||||
"cool_min_layer_time": { "value": 5 },
|
||||
"cool_min_layer_time_overhang": { "value": 9 },
|
||||
"cool_min_layer_time_overhang_min_segment_length": { "value": 2 },
|
||||
|
|
@ -245,7 +264,7 @@
|
|||
{
|
||||
"maximum_value_warning": "machine_max_jerk_xy / 2",
|
||||
"unit": "m/s\u00b3",
|
||||
"value": "jerk_print"
|
||||
"value": "jerk_wall"
|
||||
},
|
||||
"jerk_print":
|
||||
{
|
||||
|
|
@ -385,10 +404,17 @@
|
|||
"unit": "m/s\u00b3",
|
||||
"value": "20000 if machine_gcode_flavor == 'Cheetah' else 100"
|
||||
},
|
||||
"machine_name": { "default_value": "UltiMaker S8" },
|
||||
"machine_name": { "default_value": "Ultimaker S8" },
|
||||
"machine_nozzle_cool_down_speed": { "default_value": 1.3 },
|
||||
"machine_nozzle_heat_up_speed": { "default_value": 0.6 },
|
||||
"machine_start_gcode": { "default_value": "M213 U0.1 ;undercut 0.1mm" },
|
||||
"material_bed_temperature":
|
||||
{
|
||||
"force_depends_on_settings": [
|
||||
"support_extruder_nr",
|
||||
"support_enable"
|
||||
]
|
||||
},
|
||||
"material_extrusion_cool_down_speed": { "value": 0 },
|
||||
"material_final_print_temperature": { "value": "material_print_temperature - 5" },
|
||||
"material_initial_print_temperature": { "value": "material_print_temperature - 5" },
|
||||
|
|
@ -397,6 +423,7 @@
|
|||
"enabled": true,
|
||||
"value": 0.5
|
||||
},
|
||||
"material_print_temperature": { "maximum_value_warning": 320 },
|
||||
"material_print_temperature_layer_0": { "maximum_value_warning": 320 },
|
||||
"max_flow_acceleration": { "value": 8.0 },
|
||||
"max_skin_angle_for_expansion": { "value": 45 },
|
||||
|
|
@ -445,12 +472,12 @@
|
|||
"speed_layer_0":
|
||||
{
|
||||
"maximum_value_warning": 300,
|
||||
"value": "speed_wall"
|
||||
"value": "min(speed_wall, 50)"
|
||||
},
|
||||
"speed_prime_tower":
|
||||
{
|
||||
"maximum_value_warning": 300,
|
||||
"value": "speed_wall"
|
||||
"value": "min(speed_wall, 50)"
|
||||
},
|
||||
"speed_print":
|
||||
{
|
||||
|
|
@ -500,13 +527,13 @@
|
|||
"speed_travel":
|
||||
{
|
||||
"maximum_value": 500,
|
||||
"maximum_value_warning": 300,
|
||||
"value": 300
|
||||
"maximum_value_warning": 500,
|
||||
"value": 500
|
||||
},
|
||||
"speed_travel_layer_0":
|
||||
{
|
||||
"maximum_value": 500,
|
||||
"maximum_value_warning": 300,
|
||||
"maximum_value_warning": 500,
|
||||
"value": 150
|
||||
},
|
||||
"speed_wall":
|
||||
|
|
@ -556,7 +583,10 @@
|
|||
"support_roof_height": { "minimum_value_warning": 0 },
|
||||
"support_structure": { "value": "'normal'" },
|
||||
"support_top_distance": { "maximum_value_warning": "3*layer_height" },
|
||||
"support_tree_angle": { "value": 50 },
|
||||
"support_tree_angle_slow": { "value": 35 },
|
||||
"support_tree_bp_diameter": { "value": 15 },
|
||||
"support_tree_branch_diameter": { "value": 8 },
|
||||
"support_tree_tip_diameter": { "value": 1.0 },
|
||||
"support_tree_top_rate": { "value": 20 },
|
||||
"support_xy_distance_overhang": { "value": "machine_nozzle_size" },
|
||||
|
|
@ -573,6 +603,7 @@
|
|||
"wall_material_flow": { "value": 95 },
|
||||
"wall_overhang_angle": { "value": 45 },
|
||||
"wall_x_material_flow": { "value": 100 },
|
||||
"xy_offset": { "value": 0.05 },
|
||||
"z_seam_corner": { "value": "'z_seam_corner_weighted'" },
|
||||
"z_seam_position": { "value": "'backright'" },
|
||||
"z_seam_type": { "value": "'sharpest_corner'" }
|
||||
|
|
|
|||
|
|
@ -0,0 +1,32 @@
|
|||
[general]
|
||||
definition = ultimaker_methodx
|
||||
name = High Speed
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = highspeed
|
||||
is_experimental = True
|
||||
material = ultimaker_absr_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = 1C
|
||||
|
||||
[values]
|
||||
acceleration_print = 3500
|
||||
bridge_wall_speed = 300
|
||||
cool_fan_enabled = True
|
||||
cool_fan_speed = 100
|
||||
cool_min_layer_time = 3
|
||||
cool_min_temperature = 245.0
|
||||
infill_pattern = zigzag
|
||||
jerk_print = 35
|
||||
speed_layer_0 = 55
|
||||
speed_print = 300
|
||||
speed_support = 100
|
||||
speed_support_interface = 75
|
||||
speed_travel = 500
|
||||
speed_travel_layer_0 = 250
|
||||
speed_wall_0 = 40
|
||||
support_pattern = zigzag
|
||||
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
[general]
|
||||
definition = ultimaker_methodx
|
||||
name = High Speed Solid
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = highspeedsolid
|
||||
is_experimental = True
|
||||
material = ultimaker_absr_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = 1C
|
||||
|
||||
[values]
|
||||
acceleration_print = 3500
|
||||
bottom_thickness = =top_bottom_thickness
|
||||
bridge_wall_speed = 300
|
||||
cool_fan_enabled = True
|
||||
cool_fan_speed = 100
|
||||
cool_min_layer_time = 3
|
||||
cool_min_temperature = 245.0
|
||||
infill_angles = [45,135]
|
||||
infill_material_flow = 97
|
||||
infill_pattern = zigzag
|
||||
infill_sparse_density = 99
|
||||
jerk_print = 35
|
||||
speed_layer_0 = 55
|
||||
speed_print = 300
|
||||
speed_support = 100
|
||||
speed_support_interface = 75
|
||||
speed_travel = 500
|
||||
speed_travel_layer_0 = 250
|
||||
speed_wall_0 = 40
|
||||
support_pattern = zigzag
|
||||
top_bottom_thickness = =layer_height * 2
|
||||
top_thickness = =top_bottom_thickness
|
||||
|
||||
|
|
@ -0,0 +1,32 @@
|
|||
[general]
|
||||
definition = ultimaker_methodx
|
||||
name = High Speed
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = highspeed
|
||||
is_experimental = True
|
||||
material = ultimaker_absr_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = 1XA
|
||||
|
||||
[values]
|
||||
acceleration_print = 3500
|
||||
bridge_wall_speed = 300
|
||||
cool_fan_enabled = True
|
||||
cool_fan_speed = 100
|
||||
cool_min_layer_time = 3
|
||||
cool_min_temperature = 245.0
|
||||
infill_pattern = zigzag
|
||||
jerk_print = 35
|
||||
speed_layer_0 = 55
|
||||
speed_print = 300
|
||||
speed_support = 100
|
||||
speed_support_interface = 75
|
||||
speed_travel = 500
|
||||
speed_travel_layer_0 = 250
|
||||
speed_wall_0 = 40
|
||||
support_pattern = zigzag
|
||||
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
[general]
|
||||
definition = ultimaker_methodx
|
||||
name = High Speed Solid
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = highspeedsolid
|
||||
is_experimental = True
|
||||
material = ultimaker_absr_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = 1XA
|
||||
|
||||
[values]
|
||||
acceleration_print = 3500
|
||||
bottom_thickness = =top_bottom_thickness
|
||||
bridge_wall_speed = 300
|
||||
cool_fan_enabled = True
|
||||
cool_fan_speed = 100
|
||||
cool_min_layer_time = 3
|
||||
cool_min_temperature = 245.0
|
||||
infill_angles = [45,135]
|
||||
infill_material_flow = 97
|
||||
infill_pattern = zigzag
|
||||
infill_sparse_density = 99
|
||||
jerk_print = 35
|
||||
speed_layer_0 = 55
|
||||
speed_print = 300
|
||||
speed_support = 100
|
||||
speed_support_interface = 75
|
||||
speed_travel = 500
|
||||
speed_travel_layer_0 = 250
|
||||
speed_wall_0 = 40
|
||||
support_pattern = zigzag
|
||||
top_bottom_thickness = =layer_height * 2
|
||||
top_thickness = =top_bottom_thickness
|
||||
|
||||
|
|
@ -0,0 +1,32 @@
|
|||
[general]
|
||||
definition = ultimaker_methodx
|
||||
name = High Speed
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = highspeed
|
||||
is_experimental = True
|
||||
material = ultimaker_absr_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = LABS
|
||||
|
||||
[values]
|
||||
acceleration_print = 3500
|
||||
bridge_wall_speed = 300
|
||||
cool_fan_enabled = True
|
||||
cool_fan_speed = 100
|
||||
cool_min_layer_time = 3
|
||||
cool_min_temperature = 245.0
|
||||
infill_pattern = zigzag
|
||||
jerk_print = 35
|
||||
speed_layer_0 = 55
|
||||
speed_print = 300
|
||||
speed_support = 100
|
||||
speed_support_interface = 75
|
||||
speed_travel = 500
|
||||
speed_travel_layer_0 = 250
|
||||
speed_wall_0 = 40
|
||||
support_pattern = zigzag
|
||||
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
[general]
|
||||
definition = ultimaker_methodx
|
||||
name = High Speed Solid
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = highspeedsolid
|
||||
is_experimental = True
|
||||
material = ultimaker_absr_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = LABS
|
||||
|
||||
[values]
|
||||
acceleration_print = 3500
|
||||
bottom_thickness = =top_bottom_thickness
|
||||
bridge_wall_speed = 300
|
||||
cool_fan_enabled = True
|
||||
cool_fan_speed = 100
|
||||
cool_min_layer_time = 3
|
||||
cool_min_temperature = 245.0
|
||||
infill_angles = [45,135]
|
||||
infill_material_flow = 97
|
||||
infill_pattern = zigzag
|
||||
infill_sparse_density = 99
|
||||
jerk_print = 35
|
||||
speed_layer_0 = 55
|
||||
speed_print = 300
|
||||
speed_support = 100
|
||||
speed_support_interface = 75
|
||||
speed_travel = 500
|
||||
speed_travel_layer_0 = 250
|
||||
speed_wall_0 = 40
|
||||
support_pattern = zigzag
|
||||
top_bottom_thickness = =layer_height * 2
|
||||
top_thickness = =top_bottom_thickness
|
||||
|
||||
|
|
@ -0,0 +1,32 @@
|
|||
[general]
|
||||
definition = ultimaker_methodxl
|
||||
name = High Speed
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = highspeed
|
||||
is_experimental = True
|
||||
material = ultimaker_absr_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = 1C
|
||||
|
||||
[values]
|
||||
acceleration_print = 3500
|
||||
bridge_wall_speed = 300
|
||||
cool_fan_enabled = True
|
||||
cool_fan_speed = 100
|
||||
cool_min_layer_time = 3
|
||||
cool_min_temperature = 245.0
|
||||
infill_pattern = zigzag
|
||||
jerk_print = 35
|
||||
speed_layer_0 = 55
|
||||
speed_print = 300
|
||||
speed_support = 100
|
||||
speed_support_interface = 75
|
||||
speed_travel = 500
|
||||
speed_travel_layer_0 = 250
|
||||
speed_wall_0 = 40
|
||||
support_pattern = zigzag
|
||||
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
[general]
|
||||
definition = ultimaker_methodxl
|
||||
name = High Speed Solid
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = highspeedsolid
|
||||
is_experimental = True
|
||||
material = ultimaker_absr_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = 1C
|
||||
|
||||
[values]
|
||||
acceleration_print = 3500
|
||||
bottom_thickness = =top_bottom_thickness
|
||||
bridge_wall_speed = 300
|
||||
cool_fan_enabled = True
|
||||
cool_fan_speed = 100
|
||||
cool_min_layer_time = 3
|
||||
cool_min_temperature = 245.0
|
||||
infill_angles = [45,135]
|
||||
infill_material_flow = 97
|
||||
infill_pattern = zigzag
|
||||
infill_sparse_density = 99
|
||||
jerk_print = 35
|
||||
speed_layer_0 = 55
|
||||
speed_print = 300
|
||||
speed_support = 100
|
||||
speed_support_interface = 75
|
||||
speed_travel = 500
|
||||
speed_travel_layer_0 = 250
|
||||
speed_wall_0 = 40
|
||||
support_pattern = zigzag
|
||||
top_bottom_thickness = =layer_height * 2
|
||||
top_thickness = =top_bottom_thickness
|
||||
|
||||
|
|
@ -0,0 +1,32 @@
|
|||
[general]
|
||||
definition = ultimaker_methodxl
|
||||
name = High Speed
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = highspeed
|
||||
is_experimental = True
|
||||
material = ultimaker_absr_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = 1XA
|
||||
|
||||
[values]
|
||||
acceleration_print = 3500
|
||||
bridge_wall_speed = 300
|
||||
cool_fan_enabled = True
|
||||
cool_fan_speed = 100
|
||||
cool_min_layer_time = 3
|
||||
cool_min_temperature = 245.0
|
||||
infill_pattern = zigzag
|
||||
jerk_print = 35
|
||||
speed_layer_0 = 55
|
||||
speed_print = 300
|
||||
speed_support = 100
|
||||
speed_support_interface = 75
|
||||
speed_travel = 500
|
||||
speed_travel_layer_0 = 250
|
||||
speed_wall_0 = 40
|
||||
support_pattern = zigzag
|
||||
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
[general]
|
||||
definition = ultimaker_methodxl
|
||||
name = High Speed Solid
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = highspeedsolid
|
||||
is_experimental = True
|
||||
material = ultimaker_absr_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = 1XA
|
||||
|
||||
[values]
|
||||
acceleration_print = 3500
|
||||
bottom_thickness = =top_bottom_thickness
|
||||
bridge_wall_speed = 300
|
||||
cool_fan_enabled = True
|
||||
cool_fan_speed = 100
|
||||
cool_min_layer_time = 3
|
||||
cool_min_temperature = 245.0
|
||||
infill_angles = [45,135]
|
||||
infill_material_flow = 97
|
||||
infill_pattern = zigzag
|
||||
infill_sparse_density = 99
|
||||
jerk_print = 35
|
||||
speed_layer_0 = 55
|
||||
speed_print = 300
|
||||
speed_support = 100
|
||||
speed_support_interface = 75
|
||||
speed_travel = 500
|
||||
speed_travel_layer_0 = 250
|
||||
speed_wall_0 = 40
|
||||
support_pattern = zigzag
|
||||
top_bottom_thickness = =layer_height * 2
|
||||
top_thickness = =top_bottom_thickness
|
||||
|
||||
|
|
@ -0,0 +1,32 @@
|
|||
[general]
|
||||
definition = ultimaker_methodxl
|
||||
name = High Speed
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = highspeed
|
||||
is_experimental = True
|
||||
material = ultimaker_absr_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = LABS
|
||||
|
||||
[values]
|
||||
acceleration_print = 3500
|
||||
bridge_wall_speed = 300
|
||||
cool_fan_enabled = True
|
||||
cool_fan_speed = 100
|
||||
cool_min_layer_time = 3
|
||||
cool_min_temperature = 245.0
|
||||
infill_pattern = zigzag
|
||||
jerk_print = 35
|
||||
speed_layer_0 = 55
|
||||
speed_print = 300
|
||||
speed_support = 100
|
||||
speed_support_interface = 75
|
||||
speed_travel = 500
|
||||
speed_travel_layer_0 = 250
|
||||
speed_wall_0 = 40
|
||||
support_pattern = zigzag
|
||||
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
[general]
|
||||
definition = ultimaker_methodxl
|
||||
name = High Speed Solid
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = highspeedsolid
|
||||
is_experimental = True
|
||||
material = ultimaker_absr_175
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = LABS
|
||||
|
||||
[values]
|
||||
acceleration_print = 3500
|
||||
bottom_thickness = =top_bottom_thickness
|
||||
bridge_wall_speed = 300
|
||||
cool_fan_enabled = True
|
||||
cool_fan_speed = 100
|
||||
cool_min_layer_time = 3
|
||||
cool_min_temperature = 245.0
|
||||
infill_angles = [45,135]
|
||||
infill_material_flow = 97
|
||||
infill_pattern = zigzag
|
||||
infill_sparse_density = 99
|
||||
jerk_print = 35
|
||||
speed_layer_0 = 55
|
||||
speed_print = 300
|
||||
speed_support = 100
|
||||
speed_support_interface = 75
|
||||
speed_travel = 500
|
||||
speed_travel_layer_0 = 250
|
||||
speed_wall_0 = 40
|
||||
support_pattern = zigzag
|
||||
top_bottom_thickness = =layer_height * 2
|
||||
top_thickness = =top_bottom_thickness
|
||||
|
||||
|
|
@ -14,5 +14,5 @@ variant = AA+ 0.4
|
|||
[values]
|
||||
infill_sparse_density = 20
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 3
|
||||
wall_thickness = =line_width * 4
|
||||
|
||||
|
|
|
|||
|
|
@ -14,5 +14,5 @@ variant = AA+ 0.4
|
|||
[values]
|
||||
infill_sparse_density = 20
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 3
|
||||
wall_thickness = =line_width * 4
|
||||
|
||||
|
|
|
|||
|
|
@ -14,5 +14,5 @@ variant = AA+ 0.4
|
|||
[values]
|
||||
infill_sparse_density = 20
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 3
|
||||
wall_thickness = =line_width * 4
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,19 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Visual
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = visual
|
||||
material = generic_pla
|
||||
quality_type = fast
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = AA+ 0.4
|
||||
|
||||
[values]
|
||||
material_print_temperature = =default_material_print_temperature - 5
|
||||
speed_print = 100
|
||||
speed_wall = 75
|
||||
top_bottom_thickness = =round(layer_height*6,3)
|
||||
|
||||
|
|
@ -14,5 +14,5 @@ variant = AA+ 0.4
|
|||
[values]
|
||||
infill_sparse_density = 20
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 3
|
||||
wall_thickness = =line_width * 4
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,19 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Visual
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = visual
|
||||
material = generic_tough_pla
|
||||
quality_type = fast
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = AA+ 0.4
|
||||
|
||||
[values]
|
||||
material_print_temperature = =default_material_print_temperature - 5
|
||||
speed_print = 100
|
||||
speed_wall = 75
|
||||
top_bottom_thickness = =round(layer_height*6,3)
|
||||
|
||||
|
|
@ -14,5 +14,5 @@ variant = AA+ 0.4
|
|||
[values]
|
||||
infill_sparse_density = 20
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 3
|
||||
wall_thickness = =line_width * 4
|
||||
|
||||
|
|
|
|||
|
|
@ -14,5 +14,5 @@ variant = CC+ 0.4
|
|||
[values]
|
||||
infill_sparse_density = 20
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 3
|
||||
wall_thickness = =line_width * 4
|
||||
|
||||
|
|
|
|||
|
|
@ -14,5 +14,5 @@ variant = CC+ 0.4
|
|||
[values]
|
||||
infill_sparse_density = 20
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 3
|
||||
wall_thickness = =line_width * 4
|
||||
|
||||
|
|
|
|||
|
|
@ -14,5 +14,5 @@ variant = CC+ 0.4
|
|||
[values]
|
||||
infill_sparse_density = 20
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 3
|
||||
wall_thickness = =line_width * 4
|
||||
|
||||
|
|
|
|||
|
|
@ -14,5 +14,5 @@ variant = CC+ 0.4
|
|||
[values]
|
||||
infill_sparse_density = 20
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 3
|
||||
wall_thickness = =line_width * 4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,18 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Accurate
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = engineering
|
||||
material = generic_nylon-cf-slide
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = CC+ 0.6
|
||||
|
||||
[values]
|
||||
infill_sparse_density = 20
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 3
|
||||
|
||||
|
|
@ -1,18 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Accurate
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
intent_category = engineering
|
||||
material = generic_petcf
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = intent
|
||||
variant = CC+ 0.6
|
||||
|
||||
[values]
|
||||
infill_sparse_density = 20
|
||||
top_bottom_thickness = =wall_thickness
|
||||
wall_thickness = =line_width * 3
|
||||
|
||||
|
|
@ -13,8 +13,8 @@ weight = -1
|
|||
|
||||
[values]
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
machine_nozzle_cool_down_speed = 0.75
|
||||
machine_nozzle_heat_up_speed = 1.6
|
||||
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
|
||||
|
|
|
|||
|
|
@ -13,8 +13,8 @@ weight = 0
|
|||
|
||||
[values]
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
machine_nozzle_cool_down_speed = 0.75
|
||||
machine_nozzle_heat_up_speed = 1.6
|
||||
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
|
||||
|
|
|
|||
|
|
@ -13,8 +13,8 @@ weight = -2
|
|||
|
||||
[values]
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
machine_nozzle_cool_down_speed = 0.75
|
||||
machine_nozzle_heat_up_speed = 1.6
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
|
|
|
|||
|
|
@ -14,8 +14,8 @@ weight = -3
|
|||
|
||||
[values]
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
machine_nozzle_cool_down_speed = 0.75
|
||||
machine_nozzle_heat_up_speed = 1.6
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = 1
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
material_print_temperature = =default_material_print_temperature - 5
|
||||
minimum_support_area = 4
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = -1
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
minimum_support_area = 4
|
||||
retraction_count_max = 5
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = 0
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
material_print_temperature = =default_material_print_temperature - 5
|
||||
minimum_support_area = 4
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = -2
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
minimum_support_area = 4
|
||||
|
|
|
|||
|
|
@ -15,9 +15,9 @@ weight = -3
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
material_print_temperature = =default_material_print_temperature - 5
|
||||
minimum_support_area = 4
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = -2
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
minimum_support_area = 4
|
||||
retraction_count_max = 5
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = -3
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
minimum_support_area = 4
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = -4
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
minimum_support_area = 4
|
||||
|
|
|
|||
|
|
@ -13,8 +13,8 @@ weight = -1
|
|||
|
||||
[values]
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
machine_nozzle_cool_down_speed = 0.75
|
||||
machine_nozzle_heat_up_speed = 1.6
|
||||
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
|
||||
|
|
|
|||
|
|
@ -13,8 +13,8 @@ weight = 0
|
|||
|
||||
[values]
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
machine_nozzle_cool_down_speed = 0.75
|
||||
machine_nozzle_heat_up_speed = 1.6
|
||||
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
|
||||
|
|
|
|||
|
|
@ -13,8 +13,8 @@ weight = -2
|
|||
|
||||
[values]
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
machine_nozzle_cool_down_speed = 0.75
|
||||
machine_nozzle_heat_up_speed = 1.6
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
|
|
|
|||
|
|
@ -14,8 +14,8 @@ weight = -3
|
|||
|
||||
[values]
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
machine_nozzle_cool_down_speed = 0.75
|
||||
machine_nozzle_heat_up_speed = 1.6
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = 1
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
material_print_temperature = =default_material_print_temperature - 5
|
||||
minimum_support_area = 4
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = -1
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
minimum_support_area = 4
|
||||
retraction_count_max = 5
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = 0
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
material_print_temperature = =default_material_print_temperature - 5
|
||||
minimum_support_area = 4
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = -2
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
minimum_support_area = 4
|
||||
|
|
|
|||
|
|
@ -15,9 +15,9 @@ weight = -3
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
material_print_temperature = =default_material_print_temperature - 5
|
||||
minimum_support_area = 4
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = -2
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
minimum_support_area = 4
|
||||
retraction_count_max = 5
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = -3
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
minimum_support_area = 4
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ weight = -4
|
|||
[values]
|
||||
acceleration_prime_tower = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
minimum_support_area = 4
|
||||
|
|
|
|||
|
|
@ -14,4 +14,5 @@ weight = -2
|
|||
[values]
|
||||
cool_min_layer_time = 4
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
retraction_prime_speed = 15
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,19 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Normal
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_pla
|
||||
quality_type = fast
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = AA+ 0.4
|
||||
weight = -1
|
||||
|
||||
[values]
|
||||
material_final_print_temperature = =material_print_temperature - 15
|
||||
material_initial_print_temperature = =material_print_temperature - 15
|
||||
retraction_prime_speed = =retraction_speed
|
||||
support_structure = tree
|
||||
|
||||
|
|
@ -12,6 +12,9 @@ variant = AA+ 0.4
|
|||
weight = 0
|
||||
|
||||
[values]
|
||||
material_final_print_temperature = =material_print_temperature - 15
|
||||
material_initial_print_temperature = =material_print_temperature - 15
|
||||
retraction_prime_speed = =retraction_speed
|
||||
support_structure = tree
|
||||
top_bottom_thickness = =round(6*layer_height,3)
|
||||
|
||||
|
|
|
|||
|
|
@ -12,6 +12,8 @@ variant = AA+ 0.4
|
|||
weight = -2
|
||||
|
||||
[values]
|
||||
material_final_print_temperature = =material_print_temperature - 15
|
||||
material_initial_print_temperature = =material_print_temperature - 15
|
||||
retraction_prime_speed = =retraction_speed
|
||||
support_structure = tree
|
||||
|
||||
|
|
|
|||
|
|
@ -1,20 +1,18 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Fast
|
||||
name = Normal
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_tough_pla
|
||||
quality_type = draft
|
||||
quality_type = fast
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = AA+ 0.6
|
||||
weight = -2
|
||||
variant = AA+ 0.4
|
||||
weight = -1
|
||||
|
||||
[values]
|
||||
bridge_skin_material_flow = 200
|
||||
bridge_wall_material_flow = 200
|
||||
retraction_prime_speed = =retraction_speed
|
||||
support_interface_enable = False
|
||||
retraction_speed = 25
|
||||
support_structure = tree
|
||||
|
||||
|
|
@ -14,4 +14,5 @@ weight = 0
|
|||
[values]
|
||||
retraction_prime_speed = =retraction_speed
|
||||
support_structure = tree
|
||||
top_bottom_thickness = =round(6*layer_height,3)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,23 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Fast
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_abs
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = AA+ 0.6
|
||||
weight = -2
|
||||
|
||||
[values]
|
||||
bridge_skin_material_flow = 200
|
||||
bridge_wall_material_flow = 200
|
||||
cool_min_layer_time = 4
|
||||
cool_min_layer_time_fan_speed_max = 9
|
||||
cool_min_temperature = =material_print_temperature - 10
|
||||
retraction_prime_speed = 15
|
||||
support_interface_enable = False
|
||||
support_structure = tree
|
||||
|
||||
|
|
@ -1,25 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Extra Fast
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_abs
|
||||
quality_type = verydraft
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = AA+ 0.6
|
||||
weight = -3
|
||||
|
||||
[values]
|
||||
bridge_skin_material_flow = 200
|
||||
bridge_wall_material_flow = 200
|
||||
cool_min_layer_time = 4
|
||||
cool_min_layer_time_fan_speed_max = 9
|
||||
cool_min_temperature = =material_print_temperature - 10
|
||||
material_print_temperature = =default_material_print_temperature + 10
|
||||
retraction_prime_speed = 15
|
||||
support_interface_enable = False
|
||||
support_structure = tree
|
||||
wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
|
||||
|
||||
|
|
@ -1,20 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Fast
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_petg
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = AA+ 0.6
|
||||
weight = -2
|
||||
|
||||
[values]
|
||||
bridge_skin_material_flow = 200
|
||||
bridge_wall_material_flow = 200
|
||||
cool_min_layer_time = 4
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
support_interface_enable = False
|
||||
|
||||
|
|
@ -1,21 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Extra Fast
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_petg
|
||||
quality_type = verydraft
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = AA+ 0.6
|
||||
weight = -3
|
||||
|
||||
[values]
|
||||
bridge_skin_material_flow = 200
|
||||
bridge_wall_material_flow = 200
|
||||
cool_min_layer_time = 4
|
||||
material_print_temperature = =default_material_print_temperature + 10
|
||||
support_interface_enable = False
|
||||
wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
|
||||
|
||||
|
|
@ -1,20 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Fast
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_pla
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = AA+ 0.6
|
||||
weight = -2
|
||||
|
||||
[values]
|
||||
bridge_skin_material_flow = 200
|
||||
bridge_wall_material_flow = 200
|
||||
retraction_prime_speed = =retraction_speed
|
||||
support_interface_enable = False
|
||||
support_structure = tree
|
||||
|
||||
|
|
@ -1,22 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Extra Fast
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_pla
|
||||
quality_type = verydraft
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = AA+ 0.6
|
||||
weight = -3
|
||||
|
||||
[values]
|
||||
bridge_skin_material_flow = 200
|
||||
bridge_wall_material_flow = 200
|
||||
material_print_temperature = =default_material_print_temperature + 20
|
||||
retraction_prime_speed = =retraction_speed
|
||||
support_interface_enable = False
|
||||
support_structure = tree
|
||||
wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
|
||||
|
||||
|
|
@ -1,22 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Extra Fast
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_tough_pla
|
||||
quality_type = verydraft
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = AA+ 0.6
|
||||
weight = -3
|
||||
|
||||
[values]
|
||||
bridge_skin_material_flow = 200
|
||||
bridge_wall_material_flow = 200
|
||||
material_print_temperature = =default_material_print_temperature + 20
|
||||
retraction_prime_speed = =retraction_speed
|
||||
support_interface_enable = False
|
||||
support_structure = tree
|
||||
wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
|
||||
|
||||
|
|
@ -13,8 +13,8 @@ weight = -1
|
|||
|
||||
[values]
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
machine_nozzle_cool_down_speed = 0.75
|
||||
machine_nozzle_heat_up_speed = 1.6
|
||||
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
|
||||
|
|
|
|||
|
|
@ -13,8 +13,8 @@ weight = 0
|
|||
|
||||
[values]
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
machine_nozzle_cool_down_speed = 0.75
|
||||
machine_nozzle_heat_up_speed = 1.6
|
||||
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
|
||||
|
|
|
|||
|
|
@ -13,8 +13,8 @@ weight = -2
|
|||
|
||||
[values]
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
machine_nozzle_cool_down_speed = 0.75
|
||||
machine_nozzle_heat_up_speed = 1.6
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
|
|
|
|||
|
|
@ -13,8 +13,8 @@ weight = -3
|
|||
|
||||
[values]
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
machine_nozzle_cool_down_speed = 0.75
|
||||
machine_nozzle_heat_up_speed = 1.6
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
|
|
|
|||
|
|
@ -15,13 +15,16 @@ weight = -1
|
|||
acceleration_prime_tower = 1500
|
||||
acceleration_support = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
jerk_prime_tower = 4000
|
||||
jerk_support = 4000
|
||||
material_final_print_temperature = =material_print_temperature - 15
|
||||
material_initial_print_temperature = =material_print_temperature - 10
|
||||
minimum_support_area = 4
|
||||
prime_tower_min_volume = 20
|
||||
retraction_amount = 6.5
|
||||
retraction_count_max = 5
|
||||
skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
|
||||
|
|
|
|||
|
|
@ -15,14 +15,17 @@ weight = 0
|
|||
acceleration_prime_tower = 1500
|
||||
acceleration_support = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
jerk_prime_tower = 4000
|
||||
jerk_support = 4000
|
||||
material_final_print_temperature = =material_print_temperature - 15
|
||||
material_initial_print_temperature = =material_print_temperature - 10
|
||||
material_print_temperature = =default_material_print_temperature - 5
|
||||
minimum_support_area = 4
|
||||
prime_tower_min_volume = 20
|
||||
retraction_amount = 6.5
|
||||
retraction_count_max = 5
|
||||
skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
|
||||
|
|
|
|||
|
|
@ -15,14 +15,17 @@ weight = -2
|
|||
acceleration_prime_tower = 1500
|
||||
acceleration_support = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
jerk_prime_tower = 4000
|
||||
jerk_support = 4000
|
||||
material_final_print_temperature = =material_print_temperature - 15
|
||||
material_initial_print_temperature = =material_print_temperature - 10
|
||||
material_print_temperature = =default_material_print_temperature + 5
|
||||
minimum_support_area = 4
|
||||
prime_tower_min_volume = 20
|
||||
retraction_amount = 6.5
|
||||
retraction_count_max = 5
|
||||
skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
|
||||
|
|
|
|||
|
|
@ -15,14 +15,17 @@ weight = -3
|
|||
acceleration_prime_tower = 1500
|
||||
acceleration_support = 1500
|
||||
brim_replaces_support = False
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
|
||||
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
|
||||
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
|
||||
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
|
||||
initial_layer_line_width_factor = 150
|
||||
jerk_prime_tower = 4000
|
||||
jerk_support = 4000
|
||||
material_final_print_temperature = =material_print_temperature - 15
|
||||
material_initial_print_temperature = =material_print_temperature - 10
|
||||
material_print_temperature = =default_material_print_temperature - 5
|
||||
minimum_support_area = 4
|
||||
prime_tower_min_volume = 20
|
||||
retraction_amount = 6.5
|
||||
retraction_count_max = 5
|
||||
skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
|
||||
|
|
|
|||
|
|
@ -12,4 +12,8 @@ variant = CC+ 0.4
|
|||
weight = -2
|
||||
|
||||
[values]
|
||||
adhesion_type = brim
|
||||
material_alternate_walls = True
|
||||
material_final_print_temperature = =material_print_temperature - 15
|
||||
material_initial_print_temperature = =material_print_temperature - 15
|
||||
|
||||
|
|
|
|||
|
|
@ -12,10 +12,14 @@ variant = CC+ 0.4
|
|||
weight = -2
|
||||
|
||||
[values]
|
||||
adhesion_type = brim
|
||||
cool_min_layer_time = 6
|
||||
cool_min_layer_time_fan_speed_max = 12
|
||||
inset_direction = inside_out
|
||||
material_alternate_walls = True
|
||||
material_final_print_temperature = =material_print_temperature - 15
|
||||
material_flow = 95
|
||||
material_initial_print_temperature = =material_print_temperature - 15
|
||||
retraction_prime_speed = 15
|
||||
speed_wall_x = =speed_wall_0
|
||||
|
||||
|
|
|
|||
|
|
@ -12,4 +12,5 @@ variant = CC+ 0.4
|
|||
weight = -2
|
||||
|
||||
[values]
|
||||
switch_extruder_retraction_amount = 16
|
||||
|
||||
|
|
|
|||
|
|
@ -1,17 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Fast
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_nylon-cf-slide
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = CC+ 0.6
|
||||
weight = -2
|
||||
|
||||
[values]
|
||||
cool_min_layer_time_fan_speed_max = 11
|
||||
retraction_prime_speed = 15
|
||||
|
||||
|
|
@ -1,17 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Extra Fast
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_nylon-cf-slide
|
||||
quality_type = verydraft
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = CC+ 0.6
|
||||
weight = -3
|
||||
|
||||
[values]
|
||||
cool_min_layer_time_fan_speed_max = 11
|
||||
retraction_prime_speed = 15
|
||||
|
||||
|
|
@ -1,18 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Fast
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_petcf
|
||||
quality_type = draft
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = CC+ 0.6
|
||||
weight = -2
|
||||
|
||||
[values]
|
||||
bridge_skin_material_flow = 200
|
||||
bridge_wall_material_flow = 200
|
||||
support_interface_enable = False
|
||||
|
||||
|
|
@ -1,20 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Extra Fast
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
material = generic_petcf
|
||||
quality_type = verydraft
|
||||
setting_version = 25
|
||||
type = quality
|
||||
variant = CC+ 0.6
|
||||
weight = -3
|
||||
|
||||
[values]
|
||||
bridge_skin_material_flow = 200
|
||||
bridge_wall_material_flow = 200
|
||||
material_print_temperature = =default_material_print_temperature + 10
|
||||
support_interface_enable = False
|
||||
wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
|
||||
|
||||
|
|
@ -1,15 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Extra Fine
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
global_quality = True
|
||||
quality_type = high
|
||||
setting_version = 25
|
||||
type = quality
|
||||
weight = 1
|
||||
|
||||
[values]
|
||||
layer_height = =round(0.06 * material_shrinkage_percentage_z / 100, 5)
|
||||
|
||||
|
|
@ -1,15 +0,0 @@
|
|||
[general]
|
||||
definition = ultimaker_s8
|
||||
name = Sprint
|
||||
version = 4
|
||||
|
||||
[metadata]
|
||||
global_quality = True
|
||||
quality_type = superdraft
|
||||
setting_version = 25
|
||||
type = quality
|
||||
weight = -4
|
||||
|
||||
[values]
|
||||
layer_height = =round(0.4 * material_shrinkage_percentage_z / 100, 5)
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Add table
Add a link
Reference in a new issue