Merge branch '5.11' into CURA-12730_fix-paint-switch-2-to-4-extruders

resources/quality/ultimaker3/um3_bb0.4_BAM_Draft_Print.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+definition = ultimaker3
+name = Fast
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = draft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -2
+
+[values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
+brim_replaces_support = False
+brim_width = 7
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 5
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
+skin_overlap = 20
+speed_prime_tower = =speed_topbottom
+speed_print = 70
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 35 / 70)
+speed_wall = =math.ceil(speed_print * 50 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1
+xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+

resources/quality/ultimaker3/um3_bb0.4_BAM_Fast_Print.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+definition = ultimaker3
+name = Normal
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = fast
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -1
+
+[values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
+brim_replaces_support = False
+brim_width = 7
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
+skin_overlap = 15
+speed_prime_tower = =speed_topbottom
+speed_print = 80
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 80)
+speed_wall = =math.ceil(speed_print * 40 / 80)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
+support_infill_sparse_thickness = =2*layer_height
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1
+xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+

resources/quality/ultimaker3/um3_bb0.4_BAM_Normal_Quality.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+definition = ultimaker3
+name = Fine
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = normal
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = 0
+
+[values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
+brim_replaces_support = False
+brim_width = 7
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
+skin_overlap = 10
+speed_prime_tower = =speed_topbottom
+speed_print = 70
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
+support_infill_sparse_thickness = =2*layer_height
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1
+xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+

resources/quality/ultimaker_factor4/um_f4_bb0.4_bam_0.15mm.inst.cfg

@@ -0,0 +1,30 @@
+[general]
+definition = ultimaker_factor4
+name = Normal
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = fast
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -1
+
+[values]
+brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+gradual_flow_discretisation_step_size = 0.1
+gradual_flow_enabled = True
+machine_nozzle_heat_up_speed = 1.56
+max_flow_acceleration = 1
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+skin_material_flow = =material_flow * 0.965
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_join_distance = 5
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+

resources/quality/ultimaker_factor4/um_f4_bb0.4_bam_0.1mm.inst.cfg

@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_factor4
+name = Fine
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = normal
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = 0
+
+[values]
+brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+gradual_flow_discretisation_step_size = 0.1
+gradual_flow_enabled = True
+machine_nozzle_heat_up_speed = 1.56
+material_print_temperature = =default_material_print_temperature - 5
+max_flow_acceleration = 1
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+skin_material_flow = =material_flow * 0.965
+speed_print = 60
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_join_distance = 5
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+

resources/quality/ultimaker_factor4/um_f4_bb0.4_bam_0.2mm.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+definition = ultimaker_factor4
+name = Fast
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = draft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -2
+
+[values]
+brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+gradual_flow_discretisation_step_size = 0.1
+gradual_flow_enabled = True
+machine_nozzle_heat_up_speed = 1.56
+max_flow_acceleration = 1
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+skin_material_flow = =material_flow * 0.965
+speed_print = 60
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_join_distance = 5
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+

resources/quality/ultimaker_factor4/um_f4_bb0.4_bam_0.3mm.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+definition = ultimaker_factor4
+name = Extra Fast
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -3
+
+[values]
+brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+gradual_flow_discretisation_step_size = 0.1
+gradual_flow_enabled = True
+machine_nozzle_heat_up_speed = 1.56
+max_flow_acceleration = 1
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+skin_material_flow = =material_flow * 0.965
+speed_print = 50
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_join_distance = 5
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+

resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.15mm.inst.cfg

@@ -0,0 +1,46 @@
+[general]
+definition = ultimaker_s3
+name = Normal
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = fast
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -1
+
+[values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
+brim_replaces_support = False
+brim_width = 7
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+speed_prime_tower = =speed_topbottom
+speed_print = 80
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 80)
+speed_wall = =math.ceil(speed_print * 40 / 80)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
+support_infill_sparse_thickness = =2 * layer_height
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_structure = normal
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1
+

resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.1mm.inst.cfg

@@ -0,0 +1,46 @@
+[general]
+definition = ultimaker_s3
+name = Fine
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = normal
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = 0
+
+[values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
+brim_replaces_support = False
+brim_width = 7
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+speed_prime_tower = =speed_topbottom
+speed_print = 70
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
+support_infill_sparse_thickness = =2 * layer_height
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_structure = normal
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1
+

resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.2mm.inst.cfg

@@ -0,0 +1,46 @@
+[general]
+definition = ultimaker_s3
+name = Fast
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = draft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -2
+
+[values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
+brim_replaces_support = False
+brim_width = 7
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 5
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+speed_prime_tower = =speed_topbottom
+speed_print = 70
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 35 / 70)
+speed_wall = =math.ceil(speed_print * 50 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_structure = normal
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1
+

resources/quality/ultimaker_s3/um_s3_bb0.4_bam_0.3mm.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+definition = ultimaker_s3
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = generic_bam
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -3
+
+[values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
+brim_replaces_support = False
+brim_width = 7
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 5
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+speed_prime_tower = =speed_topbottom
+speed_print = 70
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 35 / 70)
+speed_wall = =math.ceil(speed_print * 50 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
+support_angle = 45
+support_bottom_distance = 0.3
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_structure = normal
+support_top_distance = 0.3
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1
+

resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.15mm.inst.cfg

@@ -0,0 +1,46 @@
+[general]
+definition = ultimaker_s5
+name = Normal
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = fast
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -1
+
+[values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
+brim_replaces_support = False
+brim_width = 7
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+speed_prime_tower = =speed_topbottom
+speed_print = 80
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 80)
+speed_wall = =math.ceil(speed_print * 40 / 80)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
+support_infill_sparse_thickness = =2 * layer_height
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_structure = normal
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1
+

resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.1mm.inst.cfg

@@ -0,0 +1,46 @@
+[general]
+definition = ultimaker_s5
+name = Fine
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = normal
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = 0
+
+[values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
+brim_replaces_support = False
+brim_width = 7
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+speed_prime_tower = =speed_topbottom
+speed_print = 70
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
+support_infill_sparse_thickness = =2 * layer_height
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_structure = normal
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1
+

resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.2mm.inst.cfg

@@ -0,0 +1,46 @@
+[general]
+definition = ultimaker_s5
+name = Fast
+version = 4
+
+[metadata]
+material = generic_bam
+quality_type = draft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -2
+
+[values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
+brim_replaces_support = False
+brim_width = 7
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 5
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+speed_prime_tower = =speed_topbottom
+speed_print = 70
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 35 / 70)
+speed_wall = =math.ceil(speed_print * 50 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
+support_angle = 45
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_structure = normal
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1
+

resources/quality/ultimaker_s5/um_s5_bb0.4_bam_0.3mm.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+definition = ultimaker_s5
+name = Extra Fast - Experimental
+version = 4
+
+[metadata]
+is_experimental = True
+material = generic_bam
+quality_type = verydraft
+setting_version = 25
+type = quality
+variant = BB 0.4
+weight = -3
+
+[values]
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
+acceleration_support_bottom = =extruderValue(support_bottom_extruder_nr, 'acceleration_support_interface')
+acceleration_support_interface = =acceleration_topbottom
+brim_replaces_support = False
+brim_width = 7
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 5
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+retraction_amount = 6.5
+speed_prime_tower = =speed_topbottom
+speed_print = 70
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 35 / 70)
+speed_wall = =math.ceil(speed_print * 50 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
+support_angle = 45
+support_bottom_distance = 0.3
+support_bottom_height = =extruderValue(support_bottom_extruder_nr, 'support_interface_height')
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_enable = True
+support_structure = normal
+support_top_distance = 0.3
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1
+