diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..104c385aa3
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = draft
+weight = -3
+material = generic_cffcpe
+variant = CC Red 0.6
+
+[values]
+adhesion_type = skirt
+cool_fan_enabled = True
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 6
+infill_line_width = =line_width
+initial_layer_line_width_factor = 130.0
+line_width = =machine_nozzle_size * (0.58/0.6)
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+skin_overlap = 20
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+wall_line_width_x = =line_width
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..14cb93e53b
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = draft
+weight = -3
+material = generic_cffpa
+variant = CC Red 0.6
+
+[values]
+adhesion_type = skirt
+cool_fan_enabled = True
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 6
+infill_line_width = =line_width
+initial_layer_line_width_factor = 130.0
+line_width = =machine_nozzle_size * (0.58/0.6)
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+skin_overlap = 20
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+wall_line_width_x = =line_width
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..30c4ea8f51
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = draft
+weight = -3
+material = generic_gffcpe
+variant = CC Red 0.6
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 6
+infill_line_width = =line_width
+initial_layer_line_width_factor = 130.0
+line_width = =machine_nozzle_size * (0.58/0.6)
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+skin_overlap = 20
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+wall_line_width_x = =line_width
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..5a0640c858
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = draft
+weight = -3
+material = generic_gffpa
+variant = CC Red 0.6
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 6
+infill_line_width = =line_width
+initial_layer_line_width_factor = 130.0
+line_width = =machine_nozzle_size * (0.58/0.6)
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+skin_overlap = 20
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+wall_line_width_x = =line_width
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..21e2dd0661
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = draft
+weight = -3
+material = generic_pla
+variant = CC Red 0.6
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+infill_pattern = triangles
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 10
+material_standby_temperature = 100
+prime_tower_enable = True
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_pattern = triangles
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..1c54089058
--- /dev/null
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = fast
+weight = -2
+material = generic_pla
+variant = CC Red 0.6
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+infill_pattern = triangles
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 10
+material_standby_temperature = 100
+prime_tower_enable = True
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_pattern = triangles
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/variants/ultimaker_s5_cc06.inst.cfg b/resources/variants/ultimaker_s5_cc06.inst.cfg
new file mode 100644
index 0000000000..e296b6c2f7
--- /dev/null
+++ b/resources/variants/ultimaker_s5_cc06.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+name = CC Red 0.6
+version = 4
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 5
+type = variant
+hardware_type = nozzle
+
+[values]
+brim_width = 7
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_id = CC 0.6
+machine_nozzle_size = 0.6
+material_print_temperature = =default_material_print_temperature + 10
+raft_acceleration = =acceleration_print
+raft_airgap = 0.3
+raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+raft_interface_line_width = =line_width * 2
+raft_interface_thickness = =layer_height * 1.5
+raft_jerk = =jerk_print
+raft_margin = 15
+raft_surface_layers = 2
+retraction_count_max = 25
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_print = 45
+speed_support = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 45)
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 30 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_use_towers = True
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = =layer_height * 6
+wall_thickness = =line_width * 3