Fix sign of compensation for default horizontal expansion

We wanted it to end up on 0.2mm by default but still scale with any customised horizontal expansion. To do that we need to add the default horizontal expansion here, rather than subtract it, since the horizontal expansion is negative.

Contributes to issue CURA-7537.

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg

@@ -32,4 +32,4 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg

@@ -32,4 +32,4 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg

@@ -32,5 +32,5 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
 

resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg

@@ -32,5 +32,5 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
 

resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg

@@ -32,5 +32,5 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
 

resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg

@@ -32,5 +32,5 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
 

resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg

@@ -32,5 +32,5 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
 

resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg

@@ -32,5 +32,5 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
 

resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg

@@ -32,5 +32,5 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
 

resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg

@@ -32,5 +32,5 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
 

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg

@@ -32,4 +32,4 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg

@@ -32,4 +32,4 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg

@@ -32,4 +32,4 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg

@@ -32,4 +32,4 @@ top_bottom_thickness = =wall_thickness
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3
 xy_offset = =-layer_height * 0.2
-xy_offset_layer_0 = =((-0.2 - layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset