Most recent updates

- Travel avoid supports
- Dual Extrusion : switch_extruder_retraction_amount = 10
- PETg updates
- Reduced infill jerk in "quick" intent and removed useless first layer jerk
- Removed no more used 1.2x material_flow_layer_0 in order to compensate a bad bed leveling
- Rewiewed forced PLA and PETg temperatures

resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_B.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_C.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_D.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_D.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_E.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_B.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_C.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_D.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_D.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_E.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_B.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_C.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_C.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 17
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+speed_print = 75
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width

resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_D.inst.cfg

@@ -12,10 +12,10 @@ material = generic_petg
 variant = DBE 0.40mm
 
 [values]
+speed_print = 75
 speed_infill = =speed_print
 speed_topbottom = =speed_print
 speed_wall = =speed_print
-speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_E.inst.cfg

@@ -12,10 +12,10 @@ material = generic_petg
 variant = DBE 0.40mm
 
 [values]
+speed_print = 75
 speed_infill = =speed_print
 speed_topbottom = =speed_print
 speed_wall = =speed_print
-speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_B.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_C.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_D.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_C.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 17
+type = intent
+quality_type = D015
+intent_category = quick
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+speed_print = 75
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width

resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_D.inst.cfg

@@ -12,10 +12,10 @@ material = generic_petg
 variant = FBE 0.40mm
 
 [values]
+speed_print = 75
 speed_infill = =speed_print
 speed_topbottom = =speed_print
 speed_wall = =speed_print
-speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_E.inst.cfg

@@ -12,10 +12,10 @@ material = generic_petg
 variant = FBE 0.40mm
 
 [values]
+speed_print = 75
 speed_infill = =speed_print
 speed_topbottom = =speed_print
 speed_wall = =speed_print
-speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_D.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_E.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_D.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_E.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width