diff --git a/cura/CuraApplication.py b/cura/CuraApplication.py
index 7a42acd376..3b5557b7d8 100755
--- a/cura/CuraApplication.py
+++ b/cura/CuraApplication.py
@@ -331,6 +331,7 @@ class CuraApplication(QtApplication):
             blackmagic
                 print_sequence
                 infill_mesh
+                cutting_mesh
             experimental
         """.replace("\n", ";").replace(" ", ""))
 
diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index c66c98119e..7e545fe0ea 100755
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -4473,6 +4473,31 @@
                     "settable_per_meshgroup": false,
                     "settable_globally": false
                 },
+                "infill_mesh_order":
+                {
+                    "label": "Infill Mesh Order",
+                    "description": "Determines which infill mesh is inside the infill of another infill mesh. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes.",
+                    "default_value": 0,
+                    "value": "1 if infill_mesh else 0",
+                    "minimum_value_warning": "1",
+                    "maximum_value_warning": "50",
+                    "type": "int",
+                    "settable_per_mesh": true,
+                    "settable_per_extruder": false,
+                    "settable_per_meshgroup": false,
+                    "settable_globally": false
+                },
+                "cutting_mesh":
+                {
+                    "label": "Cutting Mesh",
+                    "description": "Limit the volume of this mesh to within other meshes. You can use this to make certain areas of one mesh print with different settings and with a whole different extruder.",
+                    "type": "bool",
+                    "default_value": false,
+                    "settable_per_mesh": true,
+                    "settable_per_extruder": false,
+                    "settable_per_meshgroup": false,
+                    "settable_globally": false
+                },
                 "mold_enabled":
                 {
                     "label": "Mold",
@@ -4507,20 +4532,6 @@
                     "settable_per_mesh": true,
                     "enabled": "mold_enabled"
                 },
-                "infill_mesh_order":
-                {
-                    "label": "Infill Mesh Order",
-                    "description": "Determines which infill mesh is inside the infill of another infill mesh. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes.",
-                    "default_value": 0,
-                    "value": "1 if infill_mesh else 0",
-                    "minimum_value_warning": "1",
-                    "maximum_value_warning": "50",
-                    "type": "int",
-                    "settable_per_mesh": true,
-                    "settable_per_extruder": false,
-                    "settable_per_meshgroup": false,
-                    "settable_globally": false
-                },
                 "support_mesh":
                 {
                     "label": "Support Mesh",
diff --git a/resources/qml/Settings/SettingView.qml b/resources/qml/Settings/SettingView.qml
index 79314ca5cf..85d19b0cf0 100644
--- a/resources/qml/Settings/SettingView.qml
+++ b/resources/qml/Settings/SettingView.qml
@@ -154,7 +154,7 @@ Item
                 id: definitionsModel;
                 containerId: Cura.MachineManager.activeDefinitionId
                 visibilityHandler: UM.SettingPreferenceVisibilityHandler { }
-                exclude: ["machine_settings", "command_line_settings", "infill_mesh", "infill_mesh_order", "support_mesh", "anti_overhang_mesh"] // TODO: infill_mesh settigns are excluded hardcoded, but should be based on the fact that settable_globally, settable_per_meshgroup and settable_per_extruder are false.
+                exclude: ["machine_settings", "command_line_settings", "infill_mesh", "infill_mesh_order", "cutting_mesh", "support_mesh", "anti_overhang_mesh"] // TODO: infill_mesh settigns are excluded hardcoded, but should be based on the fact that settable_globally, settable_per_meshgroup and settable_per_extruder are false.
                 expanded: CuraApplication.expandedCategories
                 onExpandedChanged:
                 {