Merge branch '2.3' of github.com:Ultimaker/Cura into 2.3

cura/Settings/ContainerManager.py

@@ -610,6 +610,7 @@ class ContainerManager(QObject):
         # are also correctly created.
         with open(containers[0].getPath(), encoding="utf-8") as f:
             duplicated_container.deserialize(f.read())
+        duplicated_container.setDirty(True)
         self._container_registry.addContainer(duplicated_container)
 
     # Factory function, used by QML

cura/Settings/ExtruderManager.py

@@ -160,7 +160,7 @@ class ExtruderManager(QObject):
     def createExtruderTrain(self, extruder_definition, machine_definition, position, machine_id):
         # Cache some things.
         container_registry = UM.Settings.ContainerRegistry.getInstance()
-        machine_definition_id = machine_definition.getId()
+        machine_definition_id = UM.Application.getInstance().getMachineManager().getQualityDefinitionId(machine_definition)
 
         # Create a container stack for this extruder.
         extruder_stack_id = container_registry.uniqueName(extruder_definition.getId())
@@ -222,7 +222,7 @@ class ExtruderManager(QObject):
 
         search_criteria = { "type": "quality" }
         if machine_definition.getMetaDataEntry("has_machine_quality"):
-            search_criteria["definition"] = machine_definition.id
+            search_criteria["definition"] = machine_definition_id
             if machine_definition.getMetaDataEntry("has_materials") and material:
                 search_criteria["material"] = material.id
         else:

cura/Settings/MachineManager.py

@@ -430,13 +430,23 @@ class MachineManager(QObject):
 
         return result
 
+    ##  Get the Material ID associated with the currently active material
+    #   \returns MaterialID (string) if found, empty string otherwise
     @pyqtProperty(str, notify=activeQualityChanged)
     def activeQualityMaterialId(self):
         if self._active_container_stack:
             quality = self._active_container_stack.findContainer({"type": "quality"})
             if quality:
-                return quality.getMetaDataEntry("material")
+                material_id = quality.getMetaDataEntry("material")
+                if material_id:
+                    # if the currently active machine inherits its qualities from a different machine
+                    # definition, make sure to return a material that is relevant to that machine definition
+                    definition_id = self.activeDefinitionId
+                    quality_definition_id = self.activeQualityDefinitionId
+                    if definition_id != quality_definition_id:
+                        material_id = material_id.replace(definition_id, quality_definition_id, 1)
 
+                    return material_id
         return ""
 
     @pyqtProperty(str, notify=activeQualityChanged)
@@ -594,7 +604,7 @@ class MachineManager(QObject):
                 criteria["material"] = material.getId()
 
             if self._global_container_stack.getMetaDataEntry("has_machine_quality"):
-                criteria["definition"] = self._global_container_stack.getBottom().getId()
+                criteria["definition"] = self.activeQualityDefinitionId
             else:
                 criteria["definition"] = "fdmprinter"
 
@@ -685,6 +695,51 @@ class MachineManager(QObject):
 
         return ""
 
+    ##  Get the Definition ID to use to select quality profiles for the currently active machine
+    #   \returns DefinitionID (string) if found, empty string otherwise
+    #   \sa getQualityDefinitionId
+    @pyqtProperty(str, notify = globalContainerChanged)
+    def activeQualityDefinitionId(self):
+        if self._global_container_stack:
+            return self.getQualityDefinitionId(self._global_container_stack.getBottom())
+        return ""
+
+    ##  Get the Definition ID to use to select quality profiles for machines of the specified definition
+    #   This is normally the id of the definition itself, but machines can specify a different definition to inherit qualities from
+    #   \param definition (DefinitionContainer) machine definition
+    #   \returns DefinitionID (string) if found, empty string otherwise
+    def getQualityDefinitionId(self, definition):
+        definition_id = definition.getMetaDataEntry("quality_definition")
+        if not definition_id:
+            definition_id = definition.getId()
+        return definition_id
+
+    ##  Get the Variant ID to use to select quality profiles for the currently active variant
+    #   \returns VariantID (string) if found, empty string otherwise
+    #   \sa getQualityVariantId
+    @pyqtProperty(str, notify = activeVariantChanged)
+    def activeQualityVariantId(self):
+        if self._global_container_stack:
+            variant = self._global_container_stack.findContainer({"type": "variant"})
+            if variant:
+                return self.getQualityVariantId(self._global_container_stack.getBottom(), variant)
+        return ""
+
+    ##  Get the Variant ID to use to select quality profiles for variants of the specified definitions
+    #   This is normally the id of the variant itself, but machines can specify a different definition
+    #   to inherit qualities from, which has consequences for the variant to use as well
+    #   \param definition (DefinitionContainer) machine definition
+    #   \param variant (DefinitionContainer) variant definition
+    #   \returns VariantID (string) if found, empty string otherwise
+    def getQualityVariantId(self, definition, variant):
+        variant_id = variant.getId()
+        definition_id = definition.getId()
+        quality_definition_id = self.getQualityDefinitionId(definition)
+
+        if definition_id != quality_definition_id:
+            variant_id = variant_id.replace(definition_id, quality_definition_id, 1)
+        return variant_id
+
     ##  Gets how the active definition calls variants
     #   Caveat: per-definition-variant-title is currently not translated (though the fallback is)
     @pyqtProperty(str, notify = globalContainerChanged)
@@ -789,10 +844,10 @@ class MachineManager(QObject):
         search_criteria = { "type": "material" }
 
         if definition.getMetaDataEntry("has_machine_materials"):
-            search_criteria["definition"] = definition.id
+            search_criteria["definition"] = self.getQualityDefinitionId(definition)
 
             if definition.getMetaDataEntry("has_variants") and variant_container:
-                search_criteria["variant"] = variant_container.id
+                search_criteria["variant"] = self.getQualityVariantId(definition, variant_container)
         else:
             search_criteria["definition"] = "fdmprinter"
 
@@ -823,7 +878,7 @@ class MachineManager(QObject):
         search_criteria = { "type": "quality" }
 
         if definition.getMetaDataEntry("has_machine_quality"):
-            search_criteria["definition"] = definition.id
+            search_criteria["definition"] = self.getQualityDefinitionId(definition)
 
             if definition.getMetaDataEntry("has_materials") and material_container:
                 search_criteria["material"] = material_container.id
@@ -866,10 +921,10 @@ class MachineManager(QObject):
                     if definition.getMetaDataEntry("has_variants"):
                         material_search_criteria["variant"] = material_container.getMetaDataEntry("variant")
                 else:
-                    material_search_criteria["definition"] = definition.id
+                    material_search_criteria["definition"] = self.getQualityDefinitionId(definition)
 
                     if definition.getMetaDataEntry("has_variants") and variant_container:
-                        material_search_criteria["variant"] = variant_container.id
+                        material_search_criteria["variant"] = self.getQualityVariantId(definition, variant_container)
             else:
                 material_search_criteria["definition"] = "fdmprinter"
             material_containers = container_registry.findInstanceContainers(**material_search_criteria)

plugins/XmlMaterialProfile/XmlMaterialProfile.py

@@ -22,35 +22,6 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
         super().__init__(container_id, *args, **kwargs)
         self._inherited_files = []
 
-    ##  Overridden from InstanceContainer
-    def duplicate(self, new_id, new_name = None):
-        base_file = self.getMetaDataEntry("base_file", None)
-
-        if base_file != self.id:
-            containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id = base_file)
-            if containers:
-                new_basefile = containers[0].duplicate(self.getMetaDataEntry("brand") + "_" + new_id, new_name)
-                base_file = new_basefile.id
-                UM.Settings.ContainerRegistry.getInstance().addContainer(new_basefile)
-
-                new_id = self.getMetaDataEntry("brand") + "_" + new_id + "_" + self.getDefinition().getId()
-                variant = self.getMetaDataEntry("variant")
-                if variant:
-                    variant_containers = UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(id = variant)
-                    if variant_containers:
-                        new_id += "_" + variant_containers[0].getName().replace(" ", "_")
-            has_base_file = True
-        else:
-            has_base_file = False
-
-        new_id = UM.Settings.ContainerRegistry.getInstance().createUniqueName("material", self._id, new_id, "")
-        result = super().duplicate(new_id, new_name)
-        if has_base_file:
-            result.setMetaDataEntry("base_file", base_file)
-        else:
-            result.setMetaDataEntry("base_file", result.id)
-        return result
-
     def getInheritedFiles(self):
         return self._inherited_files
 
@@ -63,6 +34,7 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
             container._read_only = read_only  # prevent loop instead of calling setReadOnly
 
     ##  Overridden from InstanceContainer
+    #   set the meta data for all machine / variant combinations
     def setMetaDataEntry(self, key, value):
         if self.isReadOnly():
             return
@@ -103,10 +75,17 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
     #
     #     basefile = self.getMetaDataEntry("base_file", self._id)  #if basefile is self.id, this is a basefile.
     #     for container in UM.Settings.ContainerRegistry.getInstance().findInstanceContainers(base_file = basefile):
-    #         container._dirty = True
+    #         if not container.isReadOnly():
+    #             container.setDirty(True)
 
     ##  Overridden from InstanceContainer
+    # base file: global settings + supported machines
+    # machine / variant combination: only changes for itself.
     def serialize(self):
+        if self._read_only:
+            Logger.log("w", "Serializing read-only container [%s], probably a programming error." % self.id)
+            return
+
         registry = UM.Settings.ContainerRegistry.getInstance()
 
         base_file = self.getMetaDataEntry("base_file", "")
@@ -114,7 +93,7 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
             # Since we create an instance of XmlMaterialProfile for each machine and nozzle in the profile,
             # we should only serialize the "base" material definition, since that can then take care of
             # serializing the machine/nozzle specific profiles.
-            raise NotImplementedError("Cannot serialize non-root XML materials")
+            raise NotImplementedError("Ignoring serializing non-root XML materials, the data is contained in the base material")
 
         builder = ET.TreeBuilder()
 
@@ -528,7 +507,9 @@ class XmlMaterialProfile(UM.Settings.InstanceContainer):
             # Change the type of this container so it is not shown as an option in menus.
             # This uses InstanceContainer.setMetaDataEntry because otherwise all containers that
             # share this basefile are also updated.
+            dirty = self.isDirty()
             super().setMetaDataEntry("type", "incompatible_material")
+            super().setDirty(dirty) # reset dirty flag after setMetaDataEntry
 
     def _addSettingElement(self, builder, instance):
         try:

resources/definitions/ultimaker2_extended_plus.def.json

@@ -7,6 +7,7 @@
         "author": "Ultimaker",
         "manufacturer": "Ultimaker",
         "category": "Ultimaker",
+        "quality_definition": "ultimaker2_plus",
         "weight": 2,
         "file_formats": "text/x-gcode",
         "platform": "ultimaker2_platform.obj",
@@ -17,15 +18,6 @@
     "overrides": {
         "machine_height": {
             "default_value": 305
-        },
-        "machine_show_variants": {
-            "default_value": true
-        },
-        "machine_nozzle_head_distance": {
-            "default_value": 5
-        },
-        "machine_nozzle_expansion_angle": {
-            "default_value": 45
         }
     }
 }

resources/qml/Menus/MaterialMenu.qml

@@ -106,10 +106,10 @@ Menu
         var result = { "type": "material" };
         if(Cura.MachineManager.filterMaterialsByMachine)
         {
-            result.definition = Cura.MachineManager.activeDefinitionId;
+            result.definition = Cura.MachineManager.activeQualityDefinitionId;
             if(Cura.MachineManager.hasVariants)
             {
-                result.variant = Cura.MachineManager.activeVariantId;
+                result.variant = Cura.MachineManager.activeQualityVariantId;
             }
         }
         else

resources/qml/Menus/ProfileMenu.qml

@@ -38,7 +38,7 @@ Menu
         id: customProfileInstantiator
         model: UM.InstanceContainersModel
         {
-            filter: { "type": "quality_changes", "extruder": null, "definition": Cura.MachineManager.filterQualityByMachine ? Cura.MachineManager.activeDefinitionId : "fdmprinter" };
+            filter: { "type": "quality_changes", "extruder": null, "definition": Cura.MachineManager.filterQualityByMachine ? Cura.MachineManager.activeQualityDefinitionId : "fdmprinter" };
             onModelReset: customSeparator.visible = rowCount() > 0
         }
 
@@ -79,7 +79,7 @@ Menu
 
         if(Cura.MachineManager.filterQualityByMachine)
         {
-            result.definition = Cura.MachineManager.activeDefinitionId;
+            result.definition = Cura.MachineManager.activeQualityDefinitionId;
             if(Cura.MachineManager.hasMaterials)
             {
                 result.material = Cura.MachineManager.activeQualityMaterialId;

resources/qml/Preferences/MaterialsPage.qml

@@ -129,8 +129,7 @@ UM.ManagementPage
             enabled: base.currentItem != null && base.currentItem.id != Cura.MachineManager.activeMaterialId
             onClicked: Cura.MachineManager.setActiveMaterial(base.currentItem.id)
         },
-         // apparently visible does not work on OS X
+        Button
-        /*Button
         {
             text: catalog.i18nc("@action:button", "Duplicate");
             iconName: "list-add";
@@ -148,7 +147,6 @@ UM.ManagementPage
                 Cura.MachineManager.setActiveMaterial(material_id)
             }
         },
-        */
         Button
         {
             text: catalog.i18nc("@action:button", "Remove");
@@ -156,15 +154,13 @@ UM.ManagementPage
             enabled: base.currentItem != null && !base.currentItem.readOnly && !Cura.ContainerManager.isContainerUsed(base.currentItem.id)
             onClicked: confirmDialog.open()
         },
-        /*  // apparently visible does not work on OS X
         Button
         {
             text: catalog.i18nc("@action:button", "Import");
             iconName: "document-import";
             onClicked: importDialog.open();
-            visible: false;
+            visible: true;
         },
-        */
         Button
         {
             text: catalog.i18nc("@action:button", "Export")

resources/qml/Preferences/ProfilesPage.qml

@@ -23,7 +23,7 @@ UM.ManagementPage
             var result = { "type": "quality*", "extruder": null };
             if(Cura.MachineManager.filterQualityByMachine)
             {
-                result.definition = Cura.MachineManager.activeDefinitionId;
+                result.definition = Cura.MachineManager.activeQualityDefinitionId;
                 if(Cura.MachineManager.hasMaterials)
                 {
                     result.material = Cura.MachineManager.allActiveMaterialIds[Cura.MachineManager.activeMachineId];

resources/quality/ultimaker2_extended_plus/um2ep_abs_0.25_normal.inst.cfg

@@ -1,23 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_abs_ultimaker2_extended_plus_0.25_mm
-weight = -2
-quality_type = high
-
-[values]
-layer_height = 0.06
-wall_thickness = 0.88
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = 20
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
-
-

resources/quality/ultimaker2_extended_plus/um2ep_abs_0.4_fast.inst.cfg

@@ -1,26 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_abs_ultimaker2_extended_plus_0.4_mm
-weight = -1
-quality_type = fast
-
-[values]
-layer_height = 0.15
-wall_thickness = 0.7
-top_bottom_thickness = 0.75
-infill_sparse_density = 18
-speed_print = 55
-speed_wall = 40
-speed_topbottom = 30
-speed_travel = 150
-speed_layer_0 = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = 20
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
-

resources/quality/ultimaker2_extended_plus/um2ep_abs_0.4_high.inst.cfg

@@ -1,23 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_abs_ultimaker2_extended_plus_0.4_mm
-weight = -3
-quality_type = high
-
-[values]
-layer_height = 0.06
-wall_thickness = 1.05
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 45
-speed_wall = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = 20
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
-

resources/quality/ultimaker2_extended_plus/um2ep_abs_0.4_normal.inst.cfg

@@ -1,22 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_abs_ultimaker2_extended_plus_0.4_mm
-weight = -2
-quality_type = normal
-
-[values]
-layer_height = 0.1
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 45
-speed_wall = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = 20
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15

resources/quality/ultimaker2_extended_plus/um2ep_abs_0.6_normal.inst.cfg

@@ -1,24 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_abs_ultimaker2_extended_plus_0.6_mm
-weight = -2
-quality_type = normal
-
-[values]
-layer_height = 0.15
-wall_thickness = 1.59
-top_bottom_thickness = 1.2
-infill_sparse_density = 20
-speed_print = 40
-speed_infill = 55
-cool_min_layer_time = 3
-cool_fan_speed_min = 50
-cool_min_speed = 20
-cool_min_layer_time_fan_speed_max = 20
-
-

resources/quality/ultimaker2_extended_plus/um2ep_abs_0.8_normal.inst.cfg

@@ -1,22 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_abs_ultimaker2_extended_plus_0.8_mm
-weight = -2
-quality_type = fast
-
-[values]
-layer_height = 0.2
-wall_thickness = 2.1
-top_bottom_thickness = 1.2
-infill_sparse_density = 20
-speed_print = 40
-cool_min_layer_time = 3
-cool_fan_speed_min = 50
-cool_min_speed = 15
-cool_min_layer_time_fan_speed_max = 25
-

resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.25_normal.inst.cfg

@@ -1,22 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_ultimaker2_extended_plus_0.25_mm
-weight = -2
-quality_type = high
-
-[values]
-layer_height = 0.06
-wall_thickness = 0.88
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 30
-cool_min_layer_time = 2
-cool_fan_speed_min = 20
-cool_min_speed = 15
-cool_min_layer_time_fan_speed_max = 15
-

resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.4_fast.inst.cfg

@@ -1,26 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_ultimaker2_extended_plus_0.4_mm
-weight = -1
-quality_type = fast
-
-[values]
-layer_height = 0.15
-wall_thickness = 0.7
-top_bottom_thickness = 0.75
-infill_sparse_density = 18
-speed_print = 45
-speed_wall = 40
-speed_travel = 150
-speed_layer_0 = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = 80
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
-
-

resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.4_high.inst.cfg

@@ -1,22 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_ultimaker2_extended_plus_0.4_mm
-weight = -3
-quality_type = high
-
-[values]
-layer_height = 0.06
-wall_thickness = 1.05
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 45
-speed_wall = 30
-cool_min_layer_time = 2
-cool_fan_speed_min = 80
-cool_min_speed = 15
-cool_min_layer_time_fan_speed_max = 15

resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.4_normal.inst.cfg

@@ -1,23 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_ultimaker2_extended_plus_0.4_mm
-weight = -2
-quality_type = normal
-
-[values]
-layer_height = 0.1
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 45
-speed_wall = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = 80
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
-

resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.6_normal.inst.cfg

@@ -1,21 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_ultimaker2_extended_plus_0.6_mm
-weight = -2
-quality_type = normal
-
-[values]
-layer_height = 0.15
-wall_thickness = 1.59
-top_bottom_thickness = 1.2
-infill_sparse_density = 20
-speed_print = 40
-cool_min_layer_time = 5
-cool_fan_speed_min = 80
-cool_min_speed = 8
-cool_min_layer_time_fan_speed_max = 20

resources/quality/ultimaker2_extended_plus/um2ep_cpe_0.8_normal.inst.cfg

@@ -1,21 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_ultimaker2_extended_plus_0.8_mm
-weight = -2
-quality_type = fast
-
-[values]
-layer_height = 0.2
-wall_thickness = 2.1
-top_bottom_thickness = 1.2
-infill_sparse_density = 20
-speed_print = 40
-cool_min_layer_time = 3
-cool_fan_speed_min = 80
-cool_min_speed = 8
-cool_min_layer_time_fan_speed_max = 25

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_draft.inst.cfg

@@ -1,42 +0,0 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_plus_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = draft
-
-[values]
-speed_wall_x = 25
-support_z_distance = 0.26
-raft_interface_line_spacing = 1
-cool_min_speed = 8
-cool_fan_speed = 50
-wall_thickness = 1.14
-raft_margin = 15
-speed_layer_0 = 15
-raft_airgap = 0.37
-infill_overlap = 5
-layer_height = 0.2
-raft_interface_line_width = 0.8
-top_bottom_thickness = 1.5
-cool_fan_speed_min = 25
-raft_surface_line_width = 0.38
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-speed_wall_0 = 20
-adhesion_type = raft
-infill_sparse_density = 30
-layer_0_z_overlap = 0.22
-cool_min_layer_time = 3
-speed_print = 25
-line_width = 0.38
-support_angle = 45
-raft_base_line_spacing = 1.6
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.4_normal.inst.cfg

@@ -1,42 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_plus_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = normal
-
-[values]
-speed_wall_x = 30
-support_z_distance = 0.26
-raft_interface_line_spacing = 1
-cool_min_speed = 8
-cool_fan_speed = 50
-wall_thickness = 1.14
-raft_margin = 15
-speed_layer_0 = 15
-raft_airgap = 0.37
-infill_overlap = 5
-layer_height = 0.15
-raft_interface_line_width = 0.8
-top_bottom_thickness = 1.5
-cool_fan_speed_min = 25
-raft_surface_line_width = 0.38
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-speed_wall_0 = 20
-adhesion_type = raft
-infill_sparse_density = 30
-layer_0_z_overlap = 0.22
-cool_min_layer_time = 3
-speed_print = 35
-line_width = 0.38
-support_angle = 45
-raft_base_line_spacing = 1.6
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_draft.inst.cfg

@@ -1,46 +0,0 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_plus_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = draft
-
-[values]
-support_xy_distance = 0.6
-speed_travel = 150
-support_z_distance = 0.22
-speed_wall_x = 25
-cool_min_speed = 8
-cool_fan_speed = 45
-raft_surface_thickness = 0.2
-raft_surface_line_width = 0.57
-raft_interface_line_spacing = 1.4
-raft_margin = 15
-speed_layer_0 = 30
-raft_airgap = 0.37
-infill_overlap = 5
-layer_height = 0.3
-raft_base_line_spacing = 2.4
-raft_interface_line_width = 1.2
-speed_wall_0 = 20
-cool_fan_speed_min = 25
-wall_thickness = 1.14
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-infill_sparse_density = 35
-top_bottom_thickness = 0.75
-adhesion_type = raft
-line_width = 0.57
-layer_0_z_overlap = 0.22
-raft_base_line_width = 1.2
-speed_print = 25
-support_line_distance = 2.85
-support_angle = 45
-cool_min_layer_time = 3
-

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.6_normal.inst.cfg

@@ -1,46 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_plus_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_xy_distance = 0.6
-speed_travel = 150
-support_z_distance = 0.22
-speed_wall_x = 35
-cool_min_speed = 8
-cool_fan_speed = 45
-raft_surface_thickness = 0.2
-raft_surface_line_width = 0.57
-raft_interface_line_spacing = 1.4
-raft_margin = 15
-speed_layer_0 = 30
-raft_airgap = 0.37
-infill_overlap = 5
-layer_height = 0.22
-raft_base_line_spacing = 2.4
-raft_interface_line_width = 1.2
-speed_wall_0 = 30
-cool_fan_speed_min = 25
-wall_thickness = 1.14
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-infill_sparse_density = 35
-top_bottom_thickness = 0.75
-adhesion_type = raft
-line_width = 0.57
-layer_0_z_overlap = 0.22
-raft_base_line_width = 1.2
-speed_print = 35
-support_line_distance = 2.85
-support_angle = 45
-cool_min_layer_time = 3
-

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_draft.inst.cfg

@@ -1,40 +0,0 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_plus_ultimaker2_extended_plus_0.8_mm
-weight = 0
-quality_type = draft
-
-[values]
-support_z_distance = 0.26
-speed_wall_x = 25
-cool_fan_speed = 50
-raft_surface_thickness = 0.2
-raft_surface_line_width = 0.7
-raft_interface_line_spacing = 1.8
-raft_airgap = 0.37
-infill_overlap = 5
-layer_height = 0.3
-raft_interface_line_width = 1.6
-top_bottom_thickness = 1.2
-cool_fan_speed_min = 25
-brim_line_count = 10
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 40
-layer_0_z_overlap = 0.22
-raft_base_line_width = 1.6
-speed_print = 25
-speed_wall_0 = 20
-support_angle = 45
-cool_min_layer_time = 3
-wall_thickness = 2.1
-

resources/quality/ultimaker2_extended_plus/um2ep_cpep_0.8_normal.inst.cfg

@@ -1,40 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_cpe_plus_ultimaker2_extended_plus_0.8_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_z_distance = 0.26
-speed_wall_x = 30
-cool_fan_speed = 50
-raft_surface_thickness = 0.2
-raft_surface_line_width = 0.7
-raft_interface_line_spacing = 1.8
-raft_airgap = 0.37
-infill_overlap = 5
-layer_height = 0.2
-raft_interface_line_width = 1.6
-top_bottom_thickness = 1.2
-cool_fan_speed_min = 25
-brim_line_count = 10
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 40
-layer_0_z_overlap = 0.22
-raft_base_line_width = 1.6
-speed_print = 30
-speed_wall_0 = 20
-support_angle = 45
-cool_min_layer_time = 3
-wall_thickness = 2.1
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_high.inst.cfg

@@ -1,43 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.25_mm
-weight = 0
-quality_type = high
-
-[values]
-support_xy_distance = 0.6
-speed_travel = 150
-cool_fan_speed = 60
-support_z_distance = 0.45
-speed_wall_x = 40
-cool_min_speed = 15
-raft_surface_line_width = 0.2
-raft_interface_line_width = 0.5
-brim_line_count = 8
-raft_margin = 15
-speed_layer_0 = 30
-raft_airgap = 0.15
-infill_overlap = 5
-layer_height = 0.06
-raft_interface_line_spacing = 0.7
-speed_support = 40
-top_bottom_thickness = 1.2
-cool_fan_speed_min = 35
-wall_thickness = 1
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 35
-support_enable = True
-retraction_hop_enabled = 0.2
-speed_wall_0 = 20
-adhesion_type = raft
-infill_sparse_density = 25
-layer_0_z_overlap = 0.1
-raft_base_line_width = 0.5
-speed_print = 40
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.25_normal.inst.cfg

@@ -1,43 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.25_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_xy_distance = 0.6
-speed_travel = 150
-cool_fan_speed = 60
-support_z_distance = 0.45
-speed_wall_x = 40
-cool_min_speed = 15
-raft_surface_line_width = 0.2
-raft_interface_line_width = 0.5
-brim_line_count = 8
-raft_margin = 15
-speed_layer_0 = 30
-raft_airgap = 0.15
-infill_overlap = 5
-layer_height = 0.1
-raft_interface_line_spacing = 0.7
-speed_support = 40
-top_bottom_thickness = 1.2
-cool_fan_speed_min = 35
-wall_thickness = 1
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 35
-support_enable = True
-retraction_hop_enabled = 0.2
-speed_wall_0 = 20
-adhesion_type = raft
-infill_sparse_density = 25
-layer_0_z_overlap = 0.1
-raft_base_line_width = 0.5
-speed_print = 40
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_fast.inst.cfg

@@ -1,42 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = fast
-
-[values]
-support_xy_distance = 0.6
-speed_travel = 150
-support_z_distance = 0.45
-raft_interface_line_spacing = 1
-cool_min_speed = 15
-raft_surface_thickness = 0.15
-raft_surface_line_width = 0.5
-speed_layer_0 = 30
-raft_airgap = 0.57
-infill_overlap = 5
-layer_height = 0.2
-raft_interface_line_width = 0.8
-top_bottom_thickness = 0.75
-cool_fan_speed_min = 35
-wall_thickness = 1.06
-support_pattern = lines
-support_infill_rate = 25
-speed_topbottom = 20
-support_enable = True
-speed_wall = 40
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 30
-layer_0_z_overlap = 0.22
-raft_base_line_spacing = 1.6
-speed_print = 45
-support_angle = 45
-cool_min_layer_time = 3
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.4_normal.inst.cfg

@@ -1,41 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_xy_distance = 0.6
-speed_travel = 150
-support_z_distance = 0.45
-raft_interface_line_spacing = 1
-cool_min_speed = 15
-raft_surface_thickness = 0.15
-raft_surface_line_width = 0.5
-speed_layer_0 = 30
-raft_airgap = 0.57
-infill_overlap = 5
-layer_height = 0.15
-raft_interface_line_width = 0.8
-top_bottom_thickness = 0.75
-cool_fan_speed_min = 35
-wall_thickness = 1.06
-support_pattern = lines
-support_infill_rate = 25
-support_enable = True
-speed_wall = 40
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 30
-layer_0_z_overlap = 0.22
-raft_base_line_spacing = 1.6
-speed_print = 45
-support_angle = 45
-cool_min_layer_time = 3
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_fast.inst.cfg

@@ -1,46 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = fast
-
-[values]
-support_xy_distance = 0.7
-speed_travel = 150
-speed_wall_x = 40
-cool_min_speed = 15
-support_top_distance = 0.55
-raft_surface_line_width = 0.6
-raft_surface_thickness = 0.15
-brim_line_count = 8
-speed_layer_0 = 30
-raft_interface_line_spacing = 1.4
-infill_overlap = 5
-layer_height = 0.3
-raft_interface_line_width = 1.2
-speed_support = 40
-speed_wall_0 = 15
-cool_fan_speed_min = 35
-wall_thickness = 1.2
-support_pattern = lines
-support_infill_rate = 25
-speed_topbottom = 35
-support_enable = True
-retraction_hop_enabled = 0.2
-support_bottom_distance = 0.55
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 35
-layer_0_z_overlap = 0.22
-top_bottom_thickness = 1.2
-speed_print = 55
-raft_airgap = 0.44
-support_angle = 45
-raft_base_line_spacing = 2.4
-raft_base_line_width = 1.2
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.6_normal.inst.cfg

@@ -1,45 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_xy_distance = 0.7
-speed_travel = 150
-support_z_distance = 0.55
-speed_wall_x = 40
-cool_min_speed = 15
-raft_surface_line_width = 0.6
-raft_surface_thickness = 0.15
-brim_line_count = 8
-speed_layer_0 = 30
-raft_interface_line_spacing = 1.4
-infill_overlap = 5
-layer_height = 0.15
-raft_interface_line_width = 1.2
-speed_support = 40
-speed_wall_0 = 15
-cool_fan_speed_min = 35
-wall_thickness = 1.2
-support_pattern = lines
-support_infill_rate = 25
-speed_topbottom = 35
-support_enable = True
-retraction_hop_enabled = 0.2
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 35
-layer_0_z_overlap = 0.22
-top_bottom_thickness = 1.2
-speed_print = 55
-raft_airgap = 0.44
-support_angle = 45
-raft_base_line_spacing = 2.4
-raft_base_line_width = 1.2
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_draft.inst.cfg

@@ -1,46 +0,0 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.8_mm
-weight = 0
-quality_type = draft
-
-[values]
-support_xy_distance = 0.75
-speed_travel = 150
-support_z_distance = 0.5
-speed_wall_x = 40
-cool_min_speed = 15
-brim_line_count = 8
-support_top_distance = 0.5
-raft_surface_thickness = 0.2
-wall_thickness = 2.4
-raft_margin = 15
-speed_layer_0 = 30
-raft_airgap = 0.44
-infill_overlap = 5
-layer_height = 0.3
-raft_interface_line_width = 1.6
-speed_support = 40
-speed_wall_0 = 15
-cool_fan_speed_min = 35
-raft_surface_line_width = 0.7
-support_pattern = lines
-support_infill_rate = 25
-speed_topbottom = 35
-support_enable = True
-retraction_hop_enabled = 0.2
-support_bottom_distance = 0.65
-top_bottom_thickness = 1.2
-adhesion_type = raft
-infill_sparse_density = 40
-layer_0_z_overlap = 0.25
-raft_base_line_width = 1.6
-speed_print = 55
-support_angle = 45
-raft_interface_line_spacing = 1.8
-

resources/quality/ultimaker2_extended_plus/um2ep_nylon_0.8_normal.inst.cfg

@@ -1,46 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_nylon_ultimaker2_extended_plus_0.8_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_xy_distance = 0.75
-speed_travel = 150
-support_z_distance = 0.5
-speed_wall_x = 40
-cool_min_speed = 15
-brim_line_count = 8
-support_top_distance = 0.5
-raft_surface_thickness = 0.2
-wall_thickness = 2.4
-raft_margin = 15
-speed_layer_0 = 30
-raft_airgap = 0.44
-infill_overlap = 5
-layer_height = 0.2
-raft_interface_line_width = 1.6
-speed_support = 40
-speed_wall_0 = 15
-cool_fan_speed_min = 35
-raft_surface_line_width = 0.7
-support_pattern = lines
-support_infill_rate = 25
-speed_topbottom = 35
-support_enable = True
-retraction_hop_enabled = 0.2
-support_bottom_distance = 0.65
-top_bottom_thickness = 1.2
-adhesion_type = raft
-infill_sparse_density = 40
-layer_0_z_overlap = 0.25
-raft_base_line_width = 1.6
-speed_print = 55
-support_angle = 45
-raft_interface_line_spacing = 1.8
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_high.inst.cfg

@@ -1,36 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.25_mm
-weight = 0
-quality_type = high
-
-[values]
-support_z_distance = 0.19
-raft_interface_line_spacing = 0.7
-cool_min_speed = 15
-cool_fan_speed = 50
-raft_surface_line_width = 0.2
-wall_thickness = 0.88
-raft_airgap = 0.5
-infill_overlap = 5
-layer_height = 0.06
-raft_interface_line_width = 0.5
-cool_fan_speed_min = 0
-brim_line_count = 32
-support_pattern = lines
-support_infill_rate = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 25
-layer_0_z_overlap = 0.22
-cool_min_layer_time = 2
-speed_print = 30
-raft_base_line_spacing = 1
-raft_base_line_width = 0.5
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.25_normal.inst.cfg

@@ -1,36 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.25_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_z_distance = 0.19
-raft_interface_line_spacing = 0.7
-cool_min_speed = 15
-cool_fan_speed = 50
-raft_surface_line_width = 0.2
-wall_thickness = 0.88
-raft_airgap = 0.5
-infill_overlap = 5
-layer_height = 0.1
-raft_interface_line_width = 0.5
-cool_fan_speed_min = 0
-brim_line_count = 32
-support_pattern = lines
-support_infill_rate = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 25
-layer_0_z_overlap = 0.22
-cool_min_layer_time = 2
-speed_print = 30
-raft_base_line_spacing = 1
-raft_base_line_width = 0.5
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_fast.inst.cfg

@@ -1,37 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = fast
-
-[values]
-speed_wall_x = 30
-support_z_distance = 0.19
-raft_airgap = 0.57
-cool_min_speed = 8
-cool_fan_speed = 50
-raft_interface_line_spacing = 1
-infill_overlap = 5
-layer_height = 0.2
-raft_interface_line_width = 0.8
-speed_wall_0 = 20
-cool_fan_speed_min = 0
-wall_thickness = 1.2
-support_pattern = lines
-support_infill_rate = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 30
-layer_0_z_overlap = 0.22
-cool_min_layer_time = 3
-speed_print = 45
-support_angle = 45
-raft_base_line_spacing = 1.6
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.4_normal.inst.cfg

@@ -1,37 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = normal
-
-[values]
-speed_wall_x = 30
-support_z_distance = 0.19
-raft_airgap = 0.57
-cool_min_speed = 8
-cool_fan_speed = 50
-raft_interface_line_spacing = 1
-infill_overlap = 5
-layer_height = 0.1
-raft_interface_line_width = 0.8
-speed_wall_0 = 20
-cool_fan_speed_min = 0
-wall_thickness = 1.2
-support_pattern = lines
-support_infill_rate = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 30
-layer_0_z_overlap = 0.22
-cool_min_layer_time = 3
-speed_print = 45
-support_angle = 45
-raft_base_line_spacing = 1.6
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_fast.inst.cfg

@@ -1,44 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = fast
-
-[values]
-speed_travel = 150
-support_z_distance = 0.21
-speed_wall_x = 40
-cool_min_speed = 8
-cool_fan_speed = 50
-raft_surface_thickness = 0.15
-raft_surface_line_width = 0.6
-raft_interface_line_spacing = 1.4
-speed_layer_0 = 30
-raft_airgap = 0.52
-infill_overlap = 5
-layer_height = 0.3
-raft_interface_line_width = 1.2
-raft_margin = 15
-cool_fan_speed_min = 0
-wall_thickness = 1.06
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-top_bottom_thickness = 0.75
-adhesion_type = raft
-infill_sparse_density = 35
-layer_0_z_overlap = 0.22
-raft_base_line_spacing = 2.4
-speed_print = 45
-support_line_distance = 3.5333
-speed_wall_0 = 30
-support_angle = 45
-cool_min_layer_time = 3
-raft_base_line_width = 1.2
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.6_normal.inst.cfg

@@ -1,44 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = normal
-
-[values]
-speed_travel = 150
-support_z_distance = 0.21
-speed_wall_x = 40
-cool_min_speed = 8
-cool_fan_speed = 50
-raft_surface_thickness = 0.15
-raft_surface_line_width = 0.6
-raft_interface_line_spacing = 1.4
-speed_layer_0 = 30
-raft_airgap = 0.52
-infill_overlap = 5
-layer_height = 0.15
-raft_interface_line_width = 1.2
-raft_margin = 15
-cool_fan_speed_min = 0
-wall_thickness = 1.06
-support_pattern = lines
-support_infill_rate = 20
-speed_topbottom = 20
-support_enable = True
-top_bottom_thickness = 0.75
-adhesion_type = raft
-infill_sparse_density = 35
-layer_0_z_overlap = 0.22
-raft_base_line_spacing = 2.4
-speed_print = 45
-support_line_distance = 3.5333
-speed_wall_0 = 30
-support_angle = 45
-cool_min_layer_time = 3
-raft_base_line_width = 1.2
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_draft.inst.cfg

@@ -1,37 +0,0 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.8_mm
-weight = 0
-quality_type = draft
-
-[values]
-support_z_distance = 0.26
-raft_airgap = 0.47
-cool_fan_speed = 50
-raft_surface_line_width = 0.7
-raft_surface_thickness = 0.2
-brim_line_count = 10
-raft_interface_line_spacing = 1.8
-infill_overlap = 5
-layer_height = 0.5
-raft_interface_line_width = 1.6
-top_bottom_thickness = 2.0
-cool_fan_speed_min = 25
-wall_thickness = 2.1
-support_pattern = lines
-support_infill_rate = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 40
-layer_0_z_overlap = 0.22
-raft_base_line_width = 1.6
-speed_print = 40
-support_angle = 45
-cool_min_layer_time = 3
-

resources/quality/ultimaker2_extended_plus/um2ep_pc_0.8_normal.inst.cfg

@@ -1,37 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pc_ultimaker2_extended_plus_0.8_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_z_distance = 0.26
-raft_airgap = 0.47
-cool_fan_speed = 50
-raft_surface_line_width = 0.7
-raft_surface_thickness = 0.2
-brim_line_count = 10
-raft_interface_line_spacing = 1.8
-infill_overlap = 5
-layer_height = 0.2
-raft_interface_line_width = 1.6
-top_bottom_thickness = 1.2
-cool_fan_speed_min = 25
-wall_thickness = 2.1
-support_pattern = lines
-support_infill_rate = 20
-support_enable = True
-raft_margin = 15
-adhesion_type = raft
-infill_sparse_density = 40
-layer_0_z_overlap = 0.22
-raft_base_line_width = 1.6
-speed_print = 40
-support_angle = 45
-cool_min_layer_time = 3
-

resources/quality/ultimaker2_extended_plus/um2ep_pla_0.25_normal.inst.cfg

@@ -1,19 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pla_ultimaker2_extended_plus_0.25_mm
-weight = -2
-quality_type = high
-
-[values]
-layer_height = 0.06
-wall_thickness = 0.88
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 30
-cool_min_layer_time = 5
-cool_min_speed = 10

resources/quality/ultimaker2_extended_plus/um2ep_pla_0.4_fast.inst.cfg

@@ -1,21 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pla_ultimaker2_extended_plus_0.4_mm
-weight = -1
-quality_type = fast
-
-[values]
-layer_height = 0.15
-wall_thickness = 0.7
-top_bottom_thickness = 0.75
-infill_sparse_density = 18
-speed_print = 60
-speed_travel = 150
-speed_layer_0 = 30
-cool_min_layer_time = 5
-cool_min_speed = 10

resources/quality/ultimaker2_extended_plus/um2ep_pla_0.4_high.inst.cfg

@@ -1,19 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pla_ultimaker2_extended_plus_0.4_mm
-weight = -3
-quality_type = high
-
-[values]
-layer_height = 0.06
-wall_thickness = 1.05
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 50
-cool_min_layer_time = 5
-cool_min_speed = 10

resources/quality/ultimaker2_extended_plus/um2ep_pla_0.4_normal.inst.cfg

@@ -1,19 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_pla_ultimaker2_extended_plus_0.4_mm
-weight = -2
-quality_type = normal
-
-[values]
-layer_height = 0.1
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
-infill_sparse_density = 20
-speed_print = 50
-cool_min_layer_time = 5
-cool_min_speed = 10

resources/quality/ultimaker2_extended_plus/um2ep_pla_0.6_normal.inst.cfg

@@ -1,19 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-material = generic_pla_ultimaker2_extended_plus_0.6_mm
-type = quality
-weight = -2
-quality_type = normal
-
-[values]
-layer_height = 0.15
-wall_thickness = 1.59
-top_bottom_thickness = 1.2
-infill_sparse_density = 20
-speed_print = 55
-cool_min_layer_time = 5
-cool_min_speed = 10

resources/quality/ultimaker2_extended_plus/um2ep_pla_0.8_normal.inst.cfg

@@ -1,19 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-material = generic_pla_ultimaker2_extended_plus_0.8_mm
-type = quality
-weight = -2
-quality_type = fast
-
-[values]
-layer_height = 0.2
-wall_thickness = 2.1
-top_bottom_thickness = 1.2
-infill_sparse_density = 20
-speed_print = 40
-cool_min_layer_time = 5
-cool_min_speed = 10

resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.25_high.inst.cfg

@@ -1,42 +0,0 @@
-[general]
-version = 2
-name = High Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_tpu_ultimaker2_extended_plus_0.25_mm
-weight = 0
-quality_type = high
-
-[values]
-support_xy_distance = 0.6
-cool_min_speed = 15
-support_infill_rate = 25
-speed_wall_0 = 15
-layer_0_z_overlap = 0.1
-cool_min_layer_time = 7
-speed_layer_0 = 30
-speed_print = 40
-wall_thickness = 0.88
-support_enable = True
-speed_topbottom = 35
-raft_surface_line_width = 0.2
-raft_base_line_spacing = 1
-top_bottom_thickness = 1.2
-layer_height = 0.06
-support_angle = 45
-infill_sparse_density = 10
-cool_fan_speed = 60
-speed_travel = 150
-speed_support = 40
-support_z_distance = 0.45
-cool_fan_speed_min = 35
-brim_line_count = 8
-retraction_hop_enabled = 0.2
-speed_wall_x = 38
-raft_airgap = 0.2
-raft_interface_line_spacing = 1
-adhesion_type = brim
-raft_interface_line_width = 0.2
-

resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.4_normal.inst.cfg

@@ -1,39 +0,0 @@
-[general]
-version = 2
-name = Normal Quality
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_tpu_ultimaker2_extended_plus_0.4_mm
-weight = 0
-quality_type = normal
-
-[values]
-support_xy_distance = 0.65
-speed_travel = 150
-support_z_distance = 0.45
-speed_wall_x = 35
-cool_min_speed = 15
-cool_fan_speed = 60
-retraction_hop_enabled = 0.2
-brim_line_count = 8
-speed_layer_0 = 30
-raft_interface_line_spacing = 1
-raft_base_line_spacing = 2
-speed_support = 40
-raft_margin = 12
-cool_fan_speed_min = 35
-wall_thickness = 1.05
-support_infill_rate = 25
-speed_topbottom = 35
-support_enable = True
-speed_wall_0 = 20
-adhesion_type = brim
-infill_sparse_density = 10
-top_bottom_thickness = 1.2
-speed_print = 40
-support_angle = 45
-cool_min_layer_time = 10
-raft_base_line_width = 0.8
-

resources/quality/ultimaker2_extended_plus/um2ep_tpu_0.6_fast.inst.cfg

@@ -1,44 +0,0 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker2_extended_plus
-
-[metadata]
-type = quality
-material = generic_tpu_ultimaker2_extended_plus_0.6_mm
-weight = 0
-quality_type = fast
-
-[values]
-support_xy_distance = 0.7
-raft_base_line_width = 0.6
-cool_min_speed = 15
-line_width = 0.57
-support_infill_rate = 25
-speed_wall_0 = 15
-wall_thickness = 1.14
-raft_base_line_spacing = 1.2
-speed_layer_0 = 30
-raft_margin = 15
-speed_travel = 150
-raft_surface_line_width = 0.5
-layer_height = 0.12
-raft_interface_line_width = 0.57
-speed_print = 45
-top_bottom_thickness = 1.2
-speed_topbottom = 35
-layer_0_z_overlap = 0.12
-support_angle = 45
-infill_sparse_density = 10
-cool_fan_speed = 60
-speed_support = 40
-support_z_distance = 0.45
-cool_fan_speed_min = 35
-brim_line_count = 8
-retraction_hop_enabled = 0.2
-speed_wall_x = 40
-support_enable = True
-raft_interface_line_spacing = 1.2
-adhesion_type = brim
-raft_airgap = 0.24
-