diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg
index a1fc6b7e6f..df7f0fdf02 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg
@@ -12,6 +12,7 @@ material = generic_bam
 variant = AA 0.4
 
 [values]
+brim_replaces_support = False
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
@@ -26,6 +27,7 @@ speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 top_bottom_thickness = 1
 wall_thickness = 1
+support_brim_enable = True
 support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg
index ac21cce120..cf330dc984 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg
@@ -12,6 +12,7 @@ material = generic_bam
 variant = AA 0.4
 
 [values]
+brim_replaces_support = False
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
@@ -25,6 +26,7 @@ speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 top_bottom_thickness = 1
 wall_thickness = 1
+support_brim_enable = True
 support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg
index 290ee6c4db..705c9c4105 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg
@@ -12,6 +12,7 @@ material = generic_bam
 variant = AA 0.4
 
 [values]
+brim_replaces_support = False
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
@@ -21,6 +22,7 @@ material_print_temperature = =default_material_print_temperature - 10
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+support_brim_enable = True
 support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
index 816238fe69..7010d292b2 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
@@ -12,7 +12,9 @@ material = generic_pva
 variant = BB 0.4
 
 [values]
+brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 20
+support_brim_enable = True
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
index 58d5d58802..325609362f 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
@@ -12,8 +12,10 @@ material = generic_pva
 variant = BB 0.4
 
 [values]
+brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 15
+support_brim_enable = True
 support_infill_sparse_thickness = 0.3
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
index 3d7a54564a..a0507299fb 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
@@ -12,6 +12,8 @@ material = generic_pva
 variant = BB 0.4
 
 [values]
+brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+support_brim_enable = True
 support_infill_sparse_thickness = 0.18
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
index ffd99ed9ef..086f811b36 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -12,5 +12,7 @@ material = generic_pva
 variant = BB 0.4
 
 [values]
+brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+support_brim_enable = True
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
index 51c27f6a14..28556ca7bf 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
@@ -12,5 +12,7 @@ material = generic_pva
 variant = BB 0.8
 
 [values]
+brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
+support_brim_enable = True
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
index 3f645a2a50..9ad5499f18 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -12,6 +12,8 @@ material = generic_pva
 variant = BB 0.8
 
 [values]
+brim_replaces_support = False
 layer_height = 0.4
 material_standby_temperature = 100
+support_brim_enable = True
 support_interface_height = 0.9
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
index 285b9bb9ed..e616214704 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -12,7 +12,9 @@ material = generic_pva
 variant = BB 0.8
 
 [values]
+brim_replaces_support = False
 layer_height = 0.3
 material_standby_temperature = 100
+support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg
index 1c316da6ba..254afbc109 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg
@@ -12,6 +12,7 @@ material = generic_bam
 variant = AA 0.4
 
 [values]
+brim_replaces_support = False
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
@@ -26,6 +27,7 @@ speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 top_bottom_thickness = 1
 wall_thickness = 1
+support_brim_enable = True
 support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg
index 2913a021f0..39bedce77f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg
@@ -12,6 +12,7 @@ material = generic_bam
 variant = AA 0.4
 
 [values]
+brim_replaces_support = False
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
@@ -25,6 +26,7 @@ speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 top_bottom_thickness = 1
 wall_thickness = 1
+support_brim_enable = True
 support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg
index 65c922fe6f..c87d590650 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg
@@ -12,6 +12,7 @@ material = generic_bam
 variant = AA 0.4
 
 [values]
+brim_replaces_support = False
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
@@ -22,6 +23,7 @@ material_print_temperature = =default_material_print_temperature - 10
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+support_brim_enable = True
 support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
 support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
index 3997943db1..73639be0b6 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
@@ -12,7 +12,9 @@ material = generic_pva
 variant = BB 0.4
 
 [values]
+brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 20
+support_brim_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
index 52fcca9934..5da25be32d 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
@@ -12,8 +12,10 @@ material = generic_pva
 variant = BB 0.4
 
 [values]
+brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 15
+support_brim_enable = True
 support_infill_sparse_thickness = 0.3
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
index bc183a4549..36634af2c8 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
@@ -12,6 +12,8 @@ material = generic_pva
 variant = BB 0.4
 
 [values]
+brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+support_brim_enable = True
 support_infill_sparse_thickness = 0.18
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
index 0d5cc5bcfc..f76c4c944a 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -12,5 +12,7 @@ material = generic_pva
 variant = BB 0.4
 
 [values]
+brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+support_brim_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
index 465c526f2c..e4e3ab772a 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
@@ -12,5 +12,7 @@ material = generic_pva
 variant = BB 0.8
 
 [values]
+brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
+support_brim_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
index b3f6df39f9..5e78e51014 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -12,5 +12,7 @@ material = generic_pva
 variant = BB 0.8
 
 [values]
+brim_replaces_support = False
 material_standby_temperature = 100
+support_brim_enable = True
 support_interface_height = 0.9
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
index d6ef272a4d..5af09aebcc 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -12,6 +12,8 @@ material = generic_pva
 variant = BB 0.8
 
 [values]
+brim_replaces_support = False
 material_standby_temperature = 100
+support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2