new raft base thickness default

The new default of the raft base thickness is close to the current values. The limited thickness of 0.3mm is used to avoid extreme flowrate for 06 and 08 nozzle sizes. PP-243
2025-08-08 22:35:03 -06:00 · 2022-09-13 10:45:59 +02:00 · 2022-09-13 10:45:59 +02:00 · e4534943e7
commit e4534943e7
parent 08a5f07d53
20 changed files with 3 additions and 19 deletions
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@ -239,6 +239,9 @@
        "gradual_support_infill_step_height": {
            "value": "4*layer_height"
        },
+        "raft_base_thickness": {
+            "value": "min(machine_nozzle_size * 0.75, 0.3)"
+        },
        "raft_interface_line_width": {
            "value": "(raft_base_line_width + raft_surface_line_width) / 2"
        },
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@ -112,7 +112,6 @@
        "optimize_wall_printing_order": { "value": "True" },
        "prime_tower_enable": { "default_value": true },
        "raft_airgap": { "value": "0" },
-        "raft_base_thickness": { "value": "0.3" },
        "retraction_amount": { "value": "6.5" },
        "retraction_hop": { "value": "2" },
        "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@ -102,7 +102,6 @@
        "prime_tower_enable": { "value": "True" },
        "raft_airgap": { "value": "0" },
        "raft_base_speed": { "value": "20" },
-        "raft_base_thickness": { "value": "0.3" },
        "raft_interface_speed": { "value": "20" },
        "raft_speed": { "value": "25" },
        "retraction_amount": { "value": "6.5" },
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@ -103,7 +103,6 @@
        "prime_tower_enable": { "value": "True" },
        "raft_airgap": { "value": "0" },
        "raft_base_speed": { "value": "20" },
-        "raft_base_thickness": { "value": "0.3" },
        "raft_interface_speed": { "value": "20" },
        "raft_speed": { "value": "25" },
        "retraction_amount": { "value": "6.5" },
--- a/resources/variants/ultimaker3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.25.inst.cfg
@ -19,7 +19,6 @@ machine_nozzle_tip_outer_diameter = 0.65
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker3_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_aa04.inst.cfg
@ -15,7 +15,6 @@ machine_nozzle_id = AA 0.4
 machine_nozzle_tip_outer_diameter = 1.0
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
--- a/resources/variants/ultimaker3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_bb0.8.inst.cfg
@ -34,7 +34,6 @@ prime_tower_wipe_enabled = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
-raft_base_thickness = 0.3
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
--- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
@ -19,7 +19,6 @@ machine_nozzle_tip_outer_diameter = 0.65
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker3_extended_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg
@ -15,7 +15,6 @@ machine_nozzle_id = AA 0.4
 machine_nozzle_tip_outer_diameter = 1.0
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
--- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
@ -34,7 +34,6 @@ prime_tower_wipe_enabled = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
-raft_base_thickness = 0.3
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
--- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
@ -19,7 +19,6 @@ machine_nozzle_tip_outer_diameter = 0.65
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker_s3_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa04.inst.cfg
@ -15,7 +15,6 @@ machine_nozzle_id = AA 0.4
 machine_nozzle_tip_outer_diameter = 1.0
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
--- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
@ -33,7 +33,6 @@ prime_tower_wipe_enabled = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
-raft_base_thickness = 0.3
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
--- a/resources/variants/ultimaker_s3_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc04.inst.cfg
@ -15,7 +15,6 @@ machine_nozzle_id = CC 0.4
 machine_nozzle_size = 0.4
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
--- a/resources/variants/ultimaker_s3_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc06.inst.cfg
@ -15,7 +15,6 @@ machine_nozzle_id = CC 0.6
 machine_nozzle_size = 0.6
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
--- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
@ -19,7 +19,6 @@ machine_nozzle_tip_outer_diameter = 0.65
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker_s5_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa04.inst.cfg
@ -15,7 +15,6 @@ machine_nozzle_id = AA 0.4
 machine_nozzle_tip_outer_diameter = 1.0
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
--- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
@ -33,7 +33,6 @@ prime_tower_wipe_enabled = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
-raft_base_thickness = 0.3
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
--- a/resources/variants/ultimaker_s5_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc04.inst.cfg
@ -15,7 +15,6 @@ machine_nozzle_id = CC 0.4
 machine_nozzle_size = 0.4
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
--- a/resources/variants/ultimaker_s5_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc06.inst.cfg
@ -15,7 +15,6 @@ machine_nozzle_id = CC 0.6
 machine_nozzle_size = 0.6
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print