mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-12-11 16:00:47 -07:00
Merge branch 'master' into feature_multiple_BP
This commit is contained in:
Diego Prado Gesto
commit
da4c98b204
194 changed files with 6801 additions and 5633 deletions
|
|
@ -47,9 +47,9 @@
|
|||
"default_value": 30
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": ";Sliced at: {day} {date} {time}\nM104 S{material_print_temperature} ;set temperatures\nM140 S{material_bed_temperature}\nM109 S{material_print_temperature} ;wait for temperatures\nM190 S{material_bed_temperature}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 Z0 ;move Z to min endstops\nG28 X0 Y0 ;move X/Y to min endstops\nG29 ;Auto Level\nG1 Z0.6 F{travel_speed} ;move the Nozzle near the Bed\nG92 E0\nG1 Y0 ;zero the extruded length\nG1 X10 E30 F500 ;printing a Line from right to left\nG92 E0 ;zero the extruded length again\nG1 Z2\nG1 F{travel_speed}\nM117 Printing...;Put printing message on LCD screen\nM150 R255 U255 B255 P4 ;Change LED Color to white" },
|
||||
"default_value": ";Sliced at: {day} {date} {time}\nM104 S{material_print_temperature} ;set temperatures\nM140 S{material_bed_temperature}\nM109 S{material_print_temperature} ;wait for temperatures\nM190 S{material_bed_temperature}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 Z0 ;move Z to min endstops\nG28 X0 Y0 ;move X/Y to min endstops\nG29 ;Auto Level\nG1 Z0.6 F{speed_travel} ;move the Nozzle near the Bed\nG92 E0\nG1 Y0 ;zero the extruded length\nG1 X10 E30 F500 ;printing a Line from right to left\nG92 E0 ;zero the extruded length again\nG1 Z2\nG1 F{speed_travel}\nM117 Printing...;Put printing message on LCD screen\nM150 R255 U255 B255 P4 ;Change LED Color to white" },
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
||||
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -40,10 +40,10 @@
|
|||
"default_value": "RepRap"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to max endstops\nG1 Z115.0 F{travel_speed} ;move th e platform up 20mm\nG28 Z0 ;move Z to max endstop\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\nM301 H1 P26.38 I2.57 D67.78\n;Put printing message on LCD screen\nM117 Printing..."
|
||||
"default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to max endstops\nG1 Z115.0 F{speed_travel} ;move th e platform up 20mm\nG28 Z0 ;move Z to max endstop\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM301 H1 P26.38 I2.57 D67.78\n;Put printing message on LCD screen\nM117 Printing..."
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
|
||||
"default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -1,55 +1,69 @@
|
|||
{
|
||||
"version":2,
|
||||
"name":"Anycubic i3 Mega",
|
||||
"inherits":"fdmprinter",
|
||||
"metadata":{
|
||||
"visible":true,
|
||||
"author":"TheTobby",
|
||||
"manufacturer":"Anycubic",
|
||||
"file_formats":"text/x-gcode",
|
||||
"icon":"icon_ultimaker2",
|
||||
"platform":"anycubic_i3_mega_platform.stl",
|
||||
"has_materials": false,
|
||||
"has_machine_quality": true,
|
||||
"preferred_quality": "*normal*"
|
||||
"version": 2,
|
||||
"name": "Anycubic i3 Mega",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "TheTobby",
|
||||
"manufacturer": "Anycubic",
|
||||
"file_formats": "text/x-gcode",
|
||||
"icon": "icon_ultimaker2",
|
||||
"platform": "anycubic_i3_mega_platform.stl",
|
||||
"has_materials": false,
|
||||
"has_machine_quality": true,
|
||||
"preferred_quality": "*normal*"
|
||||
},
|
||||
|
||||
"overrides":{
|
||||
"machine_name":{
|
||||
"default_value":"Anycubic i3 Mega"
|
||||
|
||||
"overrides":
|
||||
{
|
||||
"machine_name":
|
||||
{
|
||||
"default_value": "Anycubic i3 Mega"
|
||||
},
|
||||
"machine_heated_bed":{
|
||||
"default_value":true
|
||||
"machine_heated_bed":
|
||||
{
|
||||
"default_value": true
|
||||
},
|
||||
"machine_width":{
|
||||
"default_value":210
|
||||
"machine_width":
|
||||
{
|
||||
"default_value": 210
|
||||
},
|
||||
"machine_height":{
|
||||
"default_value":205
|
||||
"machine_height":
|
||||
{
|
||||
"default_value": 205
|
||||
},
|
||||
"machine_depth":{
|
||||
"default_value":210
|
||||
"machine_depth":
|
||||
{
|
||||
"default_value": 210
|
||||
},
|
||||
"machine_center_is_zero":{
|
||||
"default_value":false
|
||||
"machine_center_is_zero":
|
||||
{
|
||||
"default_value": false
|
||||
},
|
||||
"machine_nozzle_size":{
|
||||
"default_value":0.4
|
||||
"machine_nozzle_size":
|
||||
{
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter":{
|
||||
"default_value":1.75
|
||||
"material_diameter":
|
||||
{
|
||||
"default_value": 1.75
|
||||
},
|
||||
"gantry_height":{
|
||||
"default_value":0
|
||||
"gantry_height":
|
||||
{
|
||||
"default_value": 0
|
||||
},
|
||||
"machine_gcode_flavor":{
|
||||
"default_value":"RepRap (Marlin/Sprinter)"
|
||||
"machine_gcode_flavor":
|
||||
{
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode":{
|
||||
"default_value":"G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\nM117 Printing...\nG5"
|
||||
"machine_start_gcode":
|
||||
{
|
||||
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing...\nG5"
|
||||
},
|
||||
"machine_end_gcode":{
|
||||
"default_value":"M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle\nto release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops\nso the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 P300 S4000"
|
||||
"machine_end_gcode":
|
||||
{
|
||||
"default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle\nto release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops\nso the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 P300 S4000"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@
|
|||
},
|
||||
"overrides": {
|
||||
"machine_start_gcode": {
|
||||
"default_value": "; -- START GCODE --\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 \nG29 Z0.12 ;Auto-bedleveling with Z offset \nG92 E0 ;zero the extruded length \nG1 F2000 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\nM117 Printing...\n; -- end of START GCODE --"
|
||||
"default_value": "; -- START GCODE --\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 \nG29 Z0.12 ;Auto-bedleveling with Z offset \nG92 E0 ;zero the extruded length \nG1 F2000 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing...\n; -- end of START GCODE --"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "; -- START GCODE --\nG28 ; Home all axes\nM104 S0 ;extruder heater off\n;M140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n;M84 ;steppers off\nG90 ;absolute positioning\n; -- end of START GCODE --"
|
||||
|
|
|
|||
|
|
@ -3664,7 +3664,7 @@
|
|||
"minimum_value": "0",
|
||||
"maximum_value_warning": "100",
|
||||
"default_value": 15,
|
||||
"value": "15 if support_enable else 0",
|
||||
"value": "15 if support_enable else 0 if support_tree_enable else 15",
|
||||
"enabled": "support_enable or support_tree_enable",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
|
|
@ -4264,6 +4264,18 @@
|
|||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"enabled": "support_enable and support_use_towers",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"support_mesh_drop_down":
|
||||
{
|
||||
"label": "Drop Down Support Mesh",
|
||||
"description": "Make support everywhere below the support mesh, so that there's no overhang in the support mesh.",
|
||||
"type": "bool",
|
||||
"default_value": true,
|
||||
"enabled": "support_mesh",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
}
|
||||
}
|
||||
},
|
||||
|
|
@ -5292,18 +5304,6 @@
|
|||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"support_mesh_drop_down":
|
||||
{
|
||||
"label": "Drop Down Support Mesh",
|
||||
"description": "Make support everywhere below the support mesh, so that there's no overhang in the support mesh.",
|
||||
"type": "bool",
|
||||
"default_value": true,
|
||||
"enabled": "support_mesh",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"anti_overhang_mesh":
|
||||
{
|
||||
"label": "Anti Overhang Mesh",
|
||||
|
|
|
|||
|
|
@ -1,4 +1,5 @@
|
|||
{
|
||||
"id": "malyan_m180",
|
||||
"version": 2,
|
||||
"name": "Malyan M180",
|
||||
"inherits": "fdmprinter",
|
||||
85
resources/definitions/malyan_m200.def.json
Normal file
85
resources/definitions/malyan_m200.def.json
Normal file
|
|
@ -0,0 +1,85 @@
|
|||
{
|
||||
"id": "malyan_m200",
|
||||
"version": 2,
|
||||
"name": "Malyan M200",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"author": "Brian Corbino, Tyler Gibson",
|
||||
"manufacturer": "Malyan",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "malyan_m200_platform.stl",
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"preferred_quality": "*normal*",
|
||||
"supports_usb_connection": true,
|
||||
"visible": true,
|
||||
"first_start_actions": ["MachineSettingsAction"],
|
||||
"supported_actions": ["MachineSettingsAction"]
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Malyan M200" },
|
||||
"speed_print": { "default_value": 50 },
|
||||
"speed_wall_0": { "value": "round(speed_print * 0.75, 2)" },
|
||||
"speed_wall_x": { "value": "speed_print" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
"speed_layer_0": { "value": "round(speed_print / 2.0, 2)" },
|
||||
"speed_travel": { "default_value": 50 },
|
||||
"speed_travel_layer_0": { "default_value": 40 },
|
||||
"speed_infill": { "value": "speed_print" },
|
||||
"speed_topbottom": {"value": "speed_print / 2"},
|
||||
|
||||
"layer_height": { "minimum_value": "0.04375", "maximum_value": "machine_nozzle_size * 0.875", "maximum_value_warning": "machine_nozzle_size * 0.48125 + 0.0875", "default_value": 0.13125 },
|
||||
"line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
|
||||
|
||||
"material_print_temperature": { "minimum_value": "0" },
|
||||
"material_print_temperature_layer_0": { "value": "min(material_print_temperature + 5, 245)" },
|
||||
"material_bed_temperature": { "minimum_value": "0" },
|
||||
"material_bed_temperature_layer_0": { "value": "min(material_bed_temperature + 5, 70)" },
|
||||
"material_standby_temperature": { "minimum_value": "0" },
|
||||
"machine_show_variants": { "default_value": true },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode" : {
|
||||
"default_value": "G21;(metric values)\nG90;(absolute positioning)\nM82;(set extruder to absolute mode)\nM107;(start with the fan off)\nG28;(Home the printer)\nG92 E0;(Reset the extruder to 0)\nG0 Z5 E5 F500;(Move up and prime the nozzle)\nG0 X-1 Z0;(Move outside the printable area)\nG1 Y60 E8 F500;(Draw a priming/wiping line to the rear)\nG1 X-1;(Move a little closer to the print area)\nG1 Y10 E16 F500;(draw more priming/wiping)\nG1 E15 F250;(Small retract)\nG92 E0;(Zero the extruder)"
|
||||
},
|
||||
"machine_end_gcode" : {
|
||||
"default_value": "G0 X0 Y127;(Stick out the part)\nM190 S0;(Turn off heat bed, don't wait.)\nG92 E10;(Set extruder to 10)\nG1 E7 F200;(retract 3mm)\nM104 S0;(Turn off nozzle, don't wait)\nG4 S300;(Delay 5 minutes)\nM107;(Turn off part fan)\nM84;(Turn off stepper motors.)"
|
||||
},
|
||||
"machine_width": { "default_value": 120 },
|
||||
"machine_depth": { "default_value": 120 },
|
||||
"machine_height": { "default_value": 120 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"material_diameter": { "value": 1.75 },
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4,
|
||||
"minimum_value": 0.15
|
||||
},
|
||||
"machine_max_feedrate_x": { "default_value": 150 },
|
||||
"machine_max_feedrate_y": { "default_value": 150 },
|
||||
"machine_max_feedrate_z": { "default_value": 1.5 },
|
||||
"machine_max_feedrate_e": { "default_value": 100 },
|
||||
"machine_max_acceleration_x": { "default_value": 800 },
|
||||
"machine_max_acceleration_y": { "default_value": 800 },
|
||||
"machine_max_acceleration_z": { "default_value": 20 },
|
||||
"machine_max_acceleration_e": { "default_value": 10000 },
|
||||
"machine_max_jerk_xy": { "default_value": 20 },
|
||||
"machine_max_jerk_z": { "default_value": 0.4 },
|
||||
"machine_max_jerk_e": { "default_value": 5},
|
||||
"adhesion_type": { "default_value": "raft" },
|
||||
"raft_margin": { "default_value": 5 },
|
||||
"raft_airgap": { "default_value": 0.2625 },
|
||||
"raft_base_thickness": { "value": "0.30625" },
|
||||
"raft_interface_thickness": { "value": "0.21875" },
|
||||
"raft_surface_layers": { "default_value": 1 },
|
||||
"skirt_line_count": { "default_value": 2},
|
||||
"brim_width" : { "default_value": 5},
|
||||
"start_layers_at_same_position": { "default_value": true},
|
||||
"retraction_combing": { "default_value": "noskin" },
|
||||
"retraction_amount" : { "default_value": 4.5},
|
||||
"retraction_speed" : { "default_value": 40},
|
||||
"coasting_enable": { "default_value": true },
|
||||
"prime_tower_enable": { "default_value": false}
|
||||
}
|
||||
}
|
||||
18
resources/definitions/monoprice_select_mini_v1.def.json
Normal file
18
resources/definitions/monoprice_select_mini_v1.def.json
Normal file
|
|
@ -0,0 +1,18 @@
|
|||
{
|
||||
"id": "monoprice_select_mini_v1",
|
||||
"version": 2,
|
||||
"name": "Monoprice Select Mini V1",
|
||||
"inherits": "malyan_m200",
|
||||
"metadata": {
|
||||
"author": "Brian Corbino, Tyler Gibson",
|
||||
"manufacturer": "Monoprice",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"quality_definition": "malyan_m200",
|
||||
"visible": true
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Monoprice Select Mini V1" }
|
||||
}
|
||||
}
|
||||
25
resources/definitions/monoprice_select_mini_v2.def.json
Normal file
25
resources/definitions/monoprice_select_mini_v2.def.json
Normal file
|
|
@ -0,0 +1,25 @@
|
|||
{
|
||||
"id": "monoprice_select_mini_v2",
|
||||
"version": 2,
|
||||
"name": "Monoprice Select Mini V2 (E3D)",
|
||||
"inherits": "malyan_m200",
|
||||
"metadata": {
|
||||
"author": "Tyler Gibson",
|
||||
"manufacturer": "Monoprice",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"preferred_quality": "*normal*",
|
||||
"visible": true
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Monoprice Select Mini V2" },
|
||||
"adhesion_type": { "default_value": "brim" },
|
||||
"retraction_combing": { "default_value": "noskin" },
|
||||
"retraction_amount" : { "default_value": 2.5},
|
||||
"retraction_speed" : { "default_value": 40},
|
||||
"material_print_temperature_layer_0": { "value": "material_print_temperature + 5" }
|
||||
}
|
||||
}
|
||||
|
|
@ -8,46 +8,59 @@
|
|||
"manufacturer": "Tevo",
|
||||
"file_formats": "text/x-gcode",
|
||||
"icon": "icon_ultimaker2",
|
||||
"has_materials": false,
|
||||
"has_materials": false,
|
||||
"has_machine_quality": true,
|
||||
"platform": "prusai3_platform.stl",
|
||||
"preferred_quality": "*normal*"
|
||||
"platform": "tevo_blackwidow.stl",
|
||||
"preferred_quality": "*normal*"
|
||||
},
|
||||
"overrides": {
|
||||
"machine_name": {
|
||||
"overrides":
|
||||
{
|
||||
"machine_name":
|
||||
{
|
||||
"default_value": "Tevo Black Widow"
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"machine_heated_bed":
|
||||
{
|
||||
"default_value": true
|
||||
},
|
||||
"machine_width": {
|
||||
"machine_width":
|
||||
{
|
||||
"default_value": 350
|
||||
},
|
||||
"machine_height": {
|
||||
"machine_height":
|
||||
{
|
||||
"default_value": 250
|
||||
},
|
||||
"machine_depth": {
|
||||
"machine_depth":
|
||||
{
|
||||
"default_value": 250
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"machine_center_is_zero":
|
||||
{
|
||||
"default_value": false
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"machine_nozzle_size":
|
||||
{
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
"material_diameter":
|
||||
{
|
||||
"default_value": 1.75
|
||||
},
|
||||
"gantry_height": {
|
||||
"gantry_height":
|
||||
{
|
||||
"default_value": 0
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"machine_gcode_flavor":
|
||||
{
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"machine_start_gcode":
|
||||
{
|
||||
"default_value": "M280 P0 S160 ; release BLTouch alarm (OK to send for Non BLTouch)\nM420 Z2 ; set fade leveling at 2mm for BLTouch (OK to send for Non BLTouch)\nG28 ; home all\nG29 ; probe bed\nG92 E0 ;zero the extruded length\nG1 X0.0 Y50.0 Z10.0 F3600\n; perform wipe and prime\nG1 Z0.0 F1000\nG1 Z0.2 Y70.0 E9.0 F1000.0 ; prime\nG1 Y100.0 E12.5 F1000.0 ; prime\nG92 E0 ; zero extruder again\nM117 Printing..."
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"machine_end_gcode":
|
||||
{
|
||||
"default_value": "G92 E0 ; zero the extruded length again\nG1 E-1.5 F500 ; retract the filament to release some of the pressure\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nG28 X0 ; home X axis\nG1 Y245 ; move Y axis to end position\nM84 ; disable motors\nM107 ; turn off fan"
|
||||
}
|
||||
}
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue